Linkcom Link View HNVR16 User manual

0
Link View HNVR16
Hybrid NVR 16 channels
User Guide
Please find the latest version of the manual and firmware at www.linkcom.fr

1
INSTRUCTION MANUAL
To obtain the best performance and ensure device function correctly, please read this instruction manual carefully and
completely.
FCC Compliance
USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED EQUIPMENT
COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
PARTY RESPONSIBLE FOR COMPLIANCE TO PART 15 OF THE FCC RULES.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A
CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE
DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES,
AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL
INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT
HIS OWN EXPENSE.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.
WARNINGS, CAUTIONS & COPYRIGHT
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of insinuated "dangerous voltage" within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral rhombus is intended to alert the user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the
product.
USERS OF THE SYSTEM ARE RESPONSIBLE FOR CHECKING AND COMPLYING WITH ALL FEDERAL,
STATE, AND LOCAL LAWS AND STATUTES COIPCERNING THE MONITORING AND RECORDING OF
VIDEO AND AUDIO SIGNALS. LINKCOM SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF THIS
SYSTEM IN VIOLATION OF CURRENT LAWS AND STATUTES.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED TO THEIR RESPECTIVE
COMPANIES.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION

2
TABLE OF CONTENTS
1 INTRODUCTION......................................................................................................................3
1.1 FEATURE.......................................................................................................................3
1.2 SPECIFICATION..........................................................................................................3
2 HARDWARE OVERVIEW......................................................................................................6
2.1 FRONT PANEL.............................................................................................................6
2.2 CAMERA & MONITOR LOOPING...........................................................................8
2.3 ALARM TRIGGER.......................................................................................................8
2.4 PTZ (PAN, TILTAND ZOOM) CAMERA...............................................................10
3 SYSTEM SETUP .....................................................................................................................11
3.1 MENU SETUP INTERFACE(GUI)...........................................................................11
3.2 LIVE VIEWING AND POP-UP MENU....................................................................13
3.3 CAMERASETUP........................................................................................................17
3.4 RECORD SETUP ........................................................................................................27
3.5 ALARM SETUP...........................................................................................................28
3.6 NETWORK SETUP ....................................................................................................30
3.7 AUTHORITY SETUP.................................................................................................35
3.8 DISK MANAGEMENT...............................................................................................37
3.9 SYSTEM SETUP .........................................................................................................39
4 HYBRID DVR PLAYBACK...................................................................................................44
4.1 TIME SEARCH ...........................................................................................................45
4.2 EVENT SEARCH........................................................................................................45
4.3 BACKUP.......................................................................................................................46
4.4 SYSTEM LOG .............................................................................................................47
5 BACKUP PLAYBACK ...........................................................................................................48
5.1 MAIN SCREEN SETTING.........................................................................................48
5.2 PLAYBACK OPERATION........................................................................................51
6 NETWORK VIEWING & PLAYBACK...............................................................................54
6.1 IP ADDRESS SETUP ON PC SITE...........................................................................54
6.2 OPTIONAL MICROSOFT INTERNET EXPLORER SETUP..............................56
6.3 LOGIN ..........................................................................................................................58
6.4 REMOTE CONTROL.................................................................................................59
6.5 CONFIGURE...............................................................................................................64
APPENDIXA: RECORDING TIME LAPSE (HOURS).............................................................79
APPENDIX B: HDD COMPATIBLE TABLE..............................................................................80
APPENDIX C: ERROR MESSAGE LIST....................................................................................82

3
1 INTRODUCTION
1.1 FEATURE
Support H.264 / MPEG4 / MJPEG decoding & H.264 encoding.
Support up to 16-channel IP cameras input.
Support up to 8-channel analog cameras input.
Analog camera recording rate up to 120 PPS @ D1.
Real-time Display & Playback.
Support 5 Megapixel IP Camera for each channel.
Audio：4 in & 1out.
Support HDDs x4.
HDD damaged block detection & temperature alarm system (HDD
S.M.A.R.T).
Support Pre-alarm recording.
Support Privacy Mask.
Support e-SATA interface.
Support HDMI Video interface .
Graphic User Interface ( GUI ).
Support time-point backup function under Ethernet remote control mode. User
can select any time period to process backup from remote side.
Support time-search & event-search function under Ethernet remote control
mode.
Up to four online clients for independent remote control; individual live-time,
play-back & time-search function available
Support PPPoE/ Static/ DHCP IP & DDNS.
Powerful mobile surveillance function, support i-Phone & Android
1.2 SPECIFICATION
MODEL
HBR-09EE
System
OS
Embedded Linux
connector
Ethernet
RJ-45, 10/100/1000 Mbps x1
VGA
output
D-SUB output
HDMI
output
HDMI output
USB 2.0
Front : 2 ports
Power
DC-12V, 5A
Video and Audio

4
Video input (IPcam, Max)
16 channels
Video input (Analog, Max)
8 channels
Audio input
4 channels
Audio output
1 channel
Hybrid DVR Functions
Camera Name
Max. 20 characters
Screen Split Control
1, 4, 9,16
Image Control
Contrast / Brightness / Saturation / Hue
Recording mode
Manual / Schedule /Alarm
Pre Recording
1~5 sec
Watermark
Support
Searching and Playback
Search Method
Date / Time / Event
Date/ Time / Event Search
Selectable on the calendar
Log Search
Through the log data to find the video event / time
Backup Type
USB
Remote Client Software
Monitoring Environment
Link View for iPhone / iPad /Android, Web site
IP / Analog cam Live View
9 Channels
Remote Search
Web site remote time / event search
System Monitoring and Recovery
Monitoring
Watchdog
Alarm
Alarm Input
8 inputs
Alarm output
1 outputs
Peripheral Devices
Audio in
3.5 Ø Earphone stereo jack / RCAx4
Audio out
3.5 Ø Earphone stereo jack
RS 485
2- pin terminal
STORAGE & BACKUP DEVICE
INTERNAL HDD
SUPPORT
SATA HDD x 4
EXTERNAL USB
BACKUPDEVICE (PAN
USB x2

5
DRIVE, HDD, BURNER)
E-SATA
x1
RAID
N/A
Networking
Type
Static/ DHCP/ PPPoE/DDNS
Environment
Operating Temp.
0 - 45 ℃/ 32~113 F
Humidity
0~80% RH (non-condensing)
Language
Type
English / Traditional Chinese / Simple Chinese / Russian /
Italian / Japanese / Czech / France / Germany / Spanish /
Portuguese
Physical
Dimensions (W x H x D)
360 x 60 x 311 mm
Weight
4 KG
* SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

6
2 HARDWARE OVERVIEW
2.1 FRONT PANEL
Hybrid DVR OPERATION
NO.
LABEL
OPERATION
1
LED
Led Indicator
2
/
USB Connector/ USB Mouse Connector
3
MIC IN
Microphone input(Phone Jack)
4
AUDIO OUT
Earphone output(Phone Jack)
4321
5
76 8
1992120
10 11 12
16 17 18
151413 24
23
22
6
2 HARDWARE OVERVIEW
2.1 FRONT PANEL
Hybrid DVR OPERATION
NO.
LABEL
OPERATION
1
LED
Led Indicator
2
/
USB Connector/ USB Mouse Connector
3
MIC IN
Microphone input(Phone Jack)
4
AUDIO OUT
Earphone output(Phone Jack)
6
2 HARDWARE OVERVIEW
2.1 FRONT PANEL
Hybrid DVR OPERATION
NO.
LABEL
OPERATION
1
LED
Led Indicator
2
/
USB Connector/ USB Mouse Connector
3
MIC IN
Microphone input(Phone Jack)
4
AUDIO OUT
Earphone output(Phone Jack)

7
BACK PANEL
NO.
LABEL
OPERATION
1
E-SATA
E-SATA interface
2
AUDIO OUT
Audio Output
3
VIDEO OUT
(VGA)
Connect to LCD monitor
4
POWER
Connect to power adapter (AC 12V/5A)
5
VIDEO OUT
(HDMI)
HDMI video output
6
ETHERNET
RJ-45 connector
7
ALARM IN/
RELAY OUT/
RS-485
8 alarm in/ 1 relay out/ RS485
8
AUDIO IN
Audio input
9
VIDEO IN
BNC video input
10
FAN
The fan louvers

8
2.2 CAMERA & MONITOR LOOPING
Here recommend link cameras by sequence to avoid unexpected image broken, from
CH1, CH2, CH3, CH4…….
2.3 ALARM TRIGGER
There are three types of alarms: Motion detection, Video Loss Alarm, and External Alarm.
Following are the possible action when alarm is triggered. Every action is configurable
(Ex. the screen display pattern, the relay triggered time.etc) and will be explained in the
later chapter.
A. When Motion detection happens:
a. The live screen pattern can be switch to single channel screen or split screen.
b. External relay/ built-in buzzer can be triggered.
c. Alarm timepoint can be recorded in the event list, and you can search for the event
in playback.
d. On the channel which the alarm triggered, the icon pops up to remind the user.
e. The pre/ post-alarm recording video can be sent to e-mail/ uploaded to FTP.
f. CGI can be sent to an http server.
B. When External Alarm happens:
a. External relay/ built-in buzzer can be triggered.
b. Alarm timepoint can be recorded in the event list, and you can search for the event
in playback.
c. On the channel which the alarm triggered, the icon pops up to remind the
user.
d. The pre/ post-alarm recording video can be sent to e-mail/ uploaded to FTP.
e. CGI can be sent to an http server.
C. When Video Loss Alarm happens:
a. External relay/ built-in buzzer can be triggered.
b. Alarm timepoint can be recorded in the event list, and you can search for the event
in playback.
c. On the channel which the alarm triggered, the icon pops up to remind the
user.
CGI can be sent to an http server.

9
D. Alarm in connecter
EX1：Connect GND & Alarm to external IR detector.
EX2：Connect N.O & COM to external siren.
Depending on the external device type,
You may connect N.C & COM to external device.
D+
RS-485: sends +/ receives +
D -
RS-485: sends -/ receives -
GND
Ground
ALARM IN 1-8
Alarm input
N.C
Relay: Normally close
N.O
Relay: Normally open
COM
Relay: Common

10
2.4 PTZ (PAN, TILT AND ZOOM) CAMERA
Following diagram for HYBRID DVR connect between PTZ camera & joystick controller, for
HYBRID DVR to control PTZ camera please make sure the CAMERA ID, BANDRATE
(default at 9600 bps) and RS-485 cable.
2 CORE
Under “Two Core”connection, controller can control speed dome without integrated protocol
into HYBRID DVR. Moreover, one keyboard can connect MAX 256 units of speed dome.

11
3 SYSTEM SETUP
3.1 MENU SETUP INTERFACE(GUI)
A. CAMERA SETUP B. RECORD SETUP
C. ALARM SETUP D. NETWORK SETUP

12
E. AUTHORITY SETUP F. DISK MANAGEMENT
G. SYSTEM SETUP H. EXIT

13
3.2 LIVE VIEWING AND POP-UP MENU
Tick the box to fix the function panel on right side. Untick it, then the function
panel will be hidden when the mouse moves away.
A. GUI MENU BAR
With live viewing mode, press this button to get into the GUI menu.
B. DISK INFORMATION
With live viewing mode, press this button to display disk information.
C. DIGITAL ZOOM
In the live full screen mode, left-click the button of the mouse to pull a range to zoom
in or zoom out the image. User can right-click the button of the mouse to disable this
function. (NOTE: Using the mouse to operate digital zoom can zoom in to max. 16
times.) Moreover, user can also use ZOOM key on the front panel to perform this
function. (First, click ZOOM Key and then click ▲▼◄► key to select zoom in or
zoom out position. Finally, click ENTER key to complete the setting. Moreover, click
ZOOM Key again can disable digital zoom function. Using the panel key to perform

14
zoom in function is fixed at 2 times.)
D. PTZ CONTROLLER
Within live-viewing mode, Clicks this button to get into the PTZ setup menu. User can
right-click the button of the mouse to exit PTZ Setup.
NOTE：Only for the camera supported PTZ function.
PTZ CONTROL
Press the minimization icon then the control panel becomes smaller:
Move the mouse and the arrow will follow the mouse and change direction. In this
mode user can click on the live view to control direction instead of the direction
key on control panel.
When a analog camera is connected, you can set up by clicking the tools icon:

15
E. AUDIO VOLUME
Press this button, and the audio volume control board will pop up.
F. AUTO SWAP
Press it to start auto swap. The interval depends on the setting in IPCam Image Setup
when it’s on single channel view. For split screen the switch dwell interval is 5 sec
G. DISPLAY CONTROL
Within live-viewing or playback mode, use display control to switch the camera
channel.
H. RECORDAND PLAYBACK CONTROL
Same as front panel controller and remote controller.
I. SOUND OUTPUT / PTZ CONTROL
There are little icon on the right top of the live vide of every channel. Click to
enable the sound output. Click to PTZ call out the control board. Note that if
those functions are not support by the camera linked, you will not see the
corresponding icons.
The sound options do not affect the audio recorded into playback video.As long as the
audio setup is enabled, the playback video includes audio even the sound output here
is turned off.
J. RECORDING STATUS
Beneath the date and time, it displays the current recording type:
Record mode: Schedule –NO REC period

16
Record mode: Schedule –ALARM REC period
Record mode: Alarm trigger
Record mode: Manual –Stop Recording
Record mode: Schedule –FULL REC period
Record mode: Manual –Recording

17
3.3 CAMERASETUP
A. Camera Setup
Hybrid DVR can connect two various cameras, analog camera or IP-Cam.
Camera Type in Analog-CAM
Camera Type in IP-CAM

18
A-1. IPCam Quick Search
Press the “IPCam Quick Search”button and click “Search Device”button in the
following, DVR will search the IPCAM devices which IP address are setup as
the same domain as DVR IP address. Moreover, click the IPCam device which
from the list can import the device information to the channel automatically
without any manual key-in step.
The IPCam has to be under the same LAN with DVR in order to connect
successfully. Ex. If DVR IP address is 192.168.10.33, IP Cam IP address should
be 192.168.10.X. You can edit IP Cam IP address here or on the IP Cam.
a. Normal Mode
Enable this channel. Key in the IP address, port, username, and password of
the device you prepare to connect. You can find the information on the IP
Cam.
Click the “connect IPCAM” button, the message will show in “State” column
to tell you whether connection succeeds or not.
Note: To the camera connected via ONVIF protocol, the PTZ control function
is not supported. Note: To the camera connected via ONVIF protocol,
the PTZ control function is not supported.
b. RSTP Mode
Under RTSP Mode, the DVR only support the IP address indication, the live
video, and video recording. Other functions like motion detection are not
supported.

19
Key in the IP address, port, username, and password of the device you
prepare to connect. You can find the information on the IP Cam.
To link to the IP camera, check the RTSP Path settings of your IP camera,
and key in the corresponding values of two streams in “RTSP Path 1” and
“RTSP Path 2”.
Note: When you select RTSP mode, make sure the substream resolution of
camera is VGA(640x480). Or you will receive the warning message
when you try to connect with the camera:
Here we lists some RTSP setting for sample:
RTSP Path 1
(IPCam Main
stream)
RTSP Path 2
(IPCam Sub
stream)
Result
1920 x 1080
640 x 480
OK.
DVR takes 1920x1080 streaming for single
channel view, and 640x480 streaming for
split screen.
1920 x 1080
N/A
(Fill in nothing
on "RTSP Path
2")
Error Message: ”Invalid Substream
Resolution! Please modify IPCam.”
DVR takes 1920x1080 streaming for both
single channel view and split screen.
However, it can only allow 640x480
resolution for split screen, so it shows error
in return.
640 x 480
N/A
(Fill in nothing
on "RTSP Path
2")
OK.
DVR takes 640x480 streaming for both
single channel view and split screen.
N/A
(Fill in nothing
on "RTSP Path
1")
640 x 480
OK.
DVR takes 640x480 streaming for both
single channel view and split screen.