Features & Specifications
V.011209
Copyright © Billion Electric Co., Ltd. All rights reserved.
SHDSL Compliance
• Compliant with ITU-T G.991.2 Standard
• Compliant with ITU-T G.991.2.bis Standard
• Symmetric data rate of up to 5.7Mbps on 2-wire;
11.4Mbps on 4-wire
• Rate Adaptive Mode
EFM Compliance
(software upgradeable)
• Compliant with IEEE 802.3ah
Network Protocols and Features
• NAT, static routing and RIP-1/2
• Universal Plug and Play (UPnP) Compliant
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
Firewall
• Built-in NAT firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including IP Spoofing,
Land Attack, Smurf Attack, Ping of Death,
TCP SYN Flooding, etc.
• Packet Filtering – port, source IP address,
destination IP address, MAC address
• URL Content Filtering – string or domain name
detection in URL strings
ATM and PPP Protocols
• Supports ATM over SHDSL.bis and SHDSL
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocols over AAL5
(RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• Classical IP over ATM (RFC 1577)
• MAC Encapsulated Routing (RFC 1483 MER)
Quality of Service Control
• Supports the DiffServ approach
• Traffic prioritization and bandwidth management
based on IP protocol, port number and address
Virtual Private Network (VPN)
(BiPAC 8501)
• Embedded IPSec and PPTP client/server
• IKE key management
• DES, 3DES and AES encryption for IPSec
• MPPE Encryption for PPTP
• L2TP over IPSec
• L2TP/PPTP/IPSec/ VPN pass-through
(BiPAC 8501 & BiPAC 8521)
Management
• Web-based GUI for remote and local management
• Firmware upgrades and configuration data
upload and download via Web-based GUI
• Embedded Telnet server for remote and local
management
• SNMP v3, MIB-I and MIB-II supported
• Supports DHCP server/client/relay
Operating Environment
• Operating temperature: 0 – 40 °C
• Storage temperature: -20 – 70 °C
• Operating Humidity: 20% – 95% non-condensing
Hardware Specifications
Physical Interface
• WAN: SHDSL port (BiPAC 8501);
2x SHDSL ports (BiPAC 8521)
• Console: PS/2
• LAN: 4-port 10/100M auto-crossover
(MDI/MDI-X) Switch
• Factory default reset button
• Power jack
• Power switch
Physical Specifications
• Dimensions: 7.09" x 4.72" x 1.57"
(180mm x 120mm x 40mm)
Power Requirements
• Input: 12V DC, 1A
Billion Electric Co., Ltd.
8F, No.192, Sec.2, Chung Hsing Road,
Hsin Tien City, Taipei County, 23146 Taiwan
www.billion.com
TEL : +886-2-2914-5665
FAX : +866-2-2918-6731, +886-2-2918-2895
Note:
Specifications in this datasheet are subject to change without prior notice.
Application Diagrams
QoS (Prioritization, IP Throttling)
Switching
HUB
Firewall
Internet
BiPAC 8521
Back-to-back connectivity (applicable to BiPAC 8521)
QoS (Prioritization, IP Throttling) QoS (Prioritization, IP Throttling)
Switching
HUB
BiPAC 8521BiPAC 8521
CO side
SHDSL.bis
CPE side
Firewall
Firewall
Switching
HUB
QoS (Prioritization, IP Throttling)
Switching
HUB
Firewall
BiPAC 8501 VPN Tunnel
SHDSL.bis
2-Wire
SHDSL.bis
4-Wire
Internet