Linksys SGE2010P Operation manual

BUSINESS SERIES
PRODUCT DATA
Model: SGE2010
48-Port Gigabit Ethernet
Switch
Ethernet Switch with 48-Port
10/100/1000 and 4 Shared SFP Slots
The Linksys SGE2010 Managed switch with WebView allows you to expand your
network securely. Configuration of the switch is secured using SSL for Web access.
The SGE2010 is optimized for maximum system availability with fully-redundant
stacking, redundant power options, and dual images for resilient firmware upgrades.
The switch secures the network through IEEE 802.1Q VLANs, IEEE 802.1X port
authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering.
The enhanced QoS and traffic-management features ensure clear and reliable voice and
video communications.
The SGE2010 provides resilient stacking for up to 4 units, or 192 ports. A stack of units
is managed as a single switch with one web management interface. The SGE2010 can
coexist in a stack with Linksys SGE2xxx/P 24-port and 48-port switches such as the Linksys
SGE2000, SGE2000P, and SGE2010P, for a maximum of 192 ports in a stack. The stacking
functionality includes master/backup unit behavior, ring and chain architecture, and hot
insertion and removal of units.
The SGE2010 switch provides an intuitive, secure management interface enabling you to
better utilize the comprehensive feature set of the SGE2010, resulting in a better optimized,
more secure network.
Optimized for the network
core with 48 Gigabit ports
and redundant power
Fully-resilient stacking
provides optimized
growth with simplified
management
Secure management via
SSH/SSL and secure user
control via 802.1x and MAC
filtering
Maximum security and
control of traffic with
policing, shaping, ACLs,
and QoS
SGE2010

PRODUCT DATA
BUSINESS SERIES
Features
48 - 10/100/1000 Ethernet•
ports
4 mini-GBIC slots (shared•
with 4 Ethernet ports)
for fiber Gigabit Ethernet
expansion
Dual images for resilient•
firmware upgrades
96 Gbps, non-blocking,•
store-and-forward switching
capacity
Simplified QoS management•
using 802.1p, Diffserv or ToS
traffic prioritization
Power redundancy when•
used with the RPS1000
Redundant Power Supply
unit
Fully-resilient stacking•
provides optimized growth
with simplified management
Access Control Lists (ACLs)•
for granular security and
QoS implementation
Configuration and•
monitoring from a standard
web browser
Secure remote management•
of the switch via SSH and
SSL encryption
802.1q-based VLANs enable•
segmentation of networks
for improved performance
and security
Private VLAN edge simplifies•
network isolation for guest
connections or autonomous
networks
Automatic configuration•
of VLANs across multiple
switches through GVRP/
GARP
48-Port Gigabit Ethernet Switch
Specifications
Model SGE2010 48-Port 10/100/1000 Ethernet Switch
Ports 48 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 Gigabit
combo ports shared between mini-GBIC ports; console port; auto MDI/
MDI-X; autonegotiate/manual setting; RPS port for connecting to
redundant power supply unit
Buttons Reset button
Cabling Type UTP CAT 5 or better for 10BASE-T/100BASE-TX; UTP CAT 5e or better for
1000BASE-T
LEDs PWR, Fan, Link/Act, PoE, Speed, RPS, Master, Stack ID 1 - 8
Performance
Switching Capacity 96 Gbps non-blocking
Forwarding Capacity 71.4M packets per second (64-byte packets)
Stacking
Stack Operation Up to 192 ports in a stack
Hot insertion and removal
Ring and chain stacking options
Master and backup master for resilient stack control
Auto-numbering or manual configuration of units in stack
Layer 2
MAC Table Size 8K
Number of VLANs 256 active VLANs (4096 range)
VLAN Port-based and 802.1q tag-based VLANs; protocol-based VLAN;
management VLAN; multicast TV VLAN; private VLAN Edge (PVE); GVRP
HOL Blocking Head-of-line blocking prevention
Layer 3
Layer 3 Options Static routing; Classless Interdomain Routing (CIDR); 60 static routes; IPv4
and IPv6; Forwarding in silicon - wirespeed forwarding of Layer 3 traffic
IPv6
IPv6 Options IPv6 over Ethernet, dual stack, IPv6 over IPv4 network with ISATAP tunnel,
IPv6 Neighbor Discovery, Stateless Address Configuration, MTU Discovery,
WEB, SSL, Telnet, Ping, Traceroute, SNTP,TFTP, SNMP, RADIUS, ACL, QoS,
Protocol Based VLANs
Management
Web User Interface Built-in web user interface for easy browser-based configuration
(HTTP/HTTPS)
SNMP SNMP version 1, 2c, and 3 with support for traps
SNMP MIBs RFC1213 MIB-2, RFC2863 Interface MIB, RFC2665 Ether-like MIB, RFC1493
Bridge MIB, RFC2674 Extended Bridge MIB (P-bridge, Q-bridge), RFC2819
RMON MIB (groups 1, 2, 3, and 9 only), RFC2737 Entity MIB,
RFC 2618 RADIUS Client MIB, RFC 1215 Traps
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history,
statistics, alarms, and events) for enhanced traffic management,
monitoring, and analysis)
Firmware Upgrade Web browser upgrade (HTTP/HTTPS) and TFTP
Dual images for resilient firmware upgrades
Port Mirroring Traffic on a port can be mirrored to another port for analysis with a
network analyzer or RMON probe.
Other Management Traceroute; single IP management; SSL security for web user interface;
Secure Shell (SSH); RADIUS; port mirroring; TFTP upgrade; DHCP client;
BootP; SNTP; Xmodem upgrade; cable diagnostics; PING; syslog; Telnet
client (SSH secure support)
Security
IEEE 802.1x 802.1x - RADIUS authentication, MD5 Hash; guest VLAN; single/multiple
host mode
Access Control Lists (ACLs) Drop or rate limit based on source and destination MAC or IP address,
protocol, port, VLAN, DSCP/IP precedence, TCP/UDP source and
destination ports, 802.1p priority, Ethernet type, ICMP packets, IGMP
packets, DHCP snooping, ARP inspection, and IP source address guard
Up to 1018 rules

PRODUCT DATA
BUSINESS SERIES
Linksys
A Division of Cisco Systems, Inc.
121 Theory
Irvine, CA 92617 USA
E-mail: [email protected]
Web: www.linksys.com
Linksys products are available in more
than 50 countries, supported by
12 Linksys Regional Offices throughout
the world. For a complete list of local
Linksys Sales and Technical Support
contacts, visit our worldwide website
at www.linksys.com
Check the product package and contents for specific features supported. Specifications are subject to change without notice.
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries.
Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their
respective holders.
80052010A-LB Model: SGE2010
User/Network port-•
level security via 802.1x
authentication and MAC-
based filtering
Increased bandwidth and•
added link redundancy with
Link Aggregation Control
Protocol (LACP)
Enhanced rate-limiting•
capabilities, including back
pressure and multicast,
broadcast, and flood control
Port mirroring for noninvasive•
monitoring of switch traffic
Jumbo Frame support up to•
10KB
SNMP v1, v2c, v3 and RMON•
support
Fully rack-mountable using•
included rack-mounting
hardware
Availability
Link Aggregation Using IEEE 802.3ad LACP, up to 8 ports in up to 8 groups
Storm Control Broadcast, multicast and unknown unicast
DOS prevention DOS attack prevention
Spanning Tree IEEE 802.1D Spanning Tree, IEEE 802.1w Rapid Spanning Tree,
IEEE 802.1s Multiple Spanning Tree, and fast linkover
IGMP (version 1 and 2) Limits bandwidth-intensive multicast traffic to only the requestors and
Snooping supports 256 multicast groups
Power Redundancy Connection to RPS unit for power redundancy
Quality of Service
Priority Levels 4 hardware queues
Scheduling Priority queuing and weighted round robin (WRR)
Class of Service Port-based; 802.1p VLAN priority-based; IPv4/v6 IP Precedence/TOS/DSCP-
based; Diffserv; Classification and Re-marking ACLs
Rate Limiting Ingress policer; egress rate control; per VLAN
Statistics 16 meters
Standards
802.3 10BASE-T Ethernet, 802.3u 100BASE-TX Fast Ethernet,
802.3ab 1000BASE-T Gigabit Ethernet, 802.3z Gigabit Ethernet,
802.3x Flow Control, 802.3ad; 802.1D STP, 802.1Q/p VLAN,
802.1w Rapid STP, 802.1s Multiple STP, 802.1x Port Access Authentication
Environmental
Dimensions 17.32" x 14.70" x 1.73" (440 x 375 x 44 mm)
Weight 10.89 lb (4.94 kg)
Power 100-240V 47-63Hz, Internal, Universal; also equipped with external
redundant power supply connector for external power supply, -48VDC
Certification UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47)
Operating Temp. 32 to 104°F (0 to 40°C)
Storage Temp. -4 to 158°F (-20 to 70°C)
Operating Humidity 10 to 90%, relative, non-condensing
Storage Humidity 10 to 95%, relative, non-condensing
Package Contents
One SGE2010 Ethernet Switch•
One AC power adapter with power cord•
Two rack-mounting kits with 8 screws•
One CD-ROM with user documentation (PDF) included•
One registration card•
Console cable•
Minimum Requirements
Web browser—Mozilla Firefox version 1.5 or later; Microsoft Internet Explorer version 5.5 or later•
Cat5 Ethernet Network Cable•
TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X)•
installed on each computer in the network
Provider support for CPE software version 1.2 or higher•