Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... User manual

QUICK INSTALLATION GUIDE
Wireless-G
PrintServer
Model: WPSM54G (EU)
Package Contents
Wireless-G PrintServer•
Start Here Folder•
Setup Wizard CD-ROM•
User Guide on the Setup CD-ROM•
Network Cable•
USB 2.0 Cable•
Power Supply•
Quick Installation•
English
Deutsch
Español
Français
Italiano
Nederlands
Português

Table of ContentsWPSM54G
1Wireless-G PrintServer
Table of Contents
English .........................................................................2
Print Server Installation.........................................................2
DriverInstallation.............................................................11
How to Use the PrintServer ....................................................17
Deutsch ........................................................................20
InstallationdesDruckservers..................................................20
InstallationdesTreibers.......................................................29
Hinweise zur Verwendung des Druckservers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Español .........................................................................38
Instalacióndelservidordeimpresión..........................................38
Instalacióndelcontrolador....................................................47
Cómo utilizar el servidor de impresión .........................................53
Français.........................................................................56
Installationduserveurd’impression...........................................56
Installationdupilote..........................................................65
Comment utiliser le serveur d’impression ?.....................................71
Italiano..........................................................................74
Installazione del server di stampa..............................................74
Installazionedeldriver........................................................83
Utilizzo del server di stampa...................................................89
Nederlands ....................................................................92
Installatie van de afdrukserver .................................................92
Installatie van het stuurprogramma..........................................101
De afdrukserver gebruiken ..................................................107
Português .................................................................... 110
Instalaçãodoservidordeimpressão.........................................110
Instalaçãodoscontroladores................................................119
Comoutilizaroservidordeimpressão....................................... 125
Copyright and Trademarks
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the
U.S. and certain other countries. Copyright © 2008 Cisco Systems, Inc. All rights reserved. Other
brands and product names are trademarks or registered trademarks of their respective holders.

English : Print Server Installation WPSM54G
2 Wireless-G PrintServer
English
Print Server Installation1
CAUTION: Make sure you have set up your printer and installed
your printer’s driver on each computer before you install the
PrintServer. (To install the printer, use the CD that came with your
printer.)
For successful installation of the printer, make sure you connect
the printer’s USB cable directly to your computer’s USB port.
A. Insert the Setup CD-ROM into
the computer’s CD-ROM drive.
The Setup Wizard should run
automatically. If it does not, click
the Start button and select Run.
In the box that appears, enter
D:\SetupWizard.exe (if“D”
is the letter of your CD-ROM
drive).
If asked, select your preferred
language. Then click Next.
B. Click Click Here to Start.
Insert the Setup CD-ROM
Welcome Screen

English : Print Server InstallationWPSM54G
3Wireless-G PrintServer
C. Click Set up PrintServer.
D. Disconnect the USB printer
cable from the computer, and
disconnect the printer’s power
adapter from the electrical
outlet.
Click Next.
E. Connect the USB printer
cable to the USB port on the
PrintServer.
Click Next.
Set Up PrintServer
Disconnect the USB Printer Cable from the
Computer
Connect the USB Printer Cable to the
PrintServer

English : Print Server Installation WPSM54G
4 Wireless-G PrintServer
F. Connect the Ethernet network
cable to your router and the
Ethernet port of the PrintServer.
(The Ethernet connection is for
configuration purposes only.
Later you can disconnect the
Ethernet network cable when
the PrintServer has connected
wirelessly.)
Click Next.
G. Connect the power adapter to
the PrintServer and an electrical
outlet.
Click Next.
H. Reconnect the printer’s power
adapter to the electrical outlet.
Click Next.
I. Wait a few moments while
the system searches for the
PrintServer.
Connect the Ethernet Network Cable to the
Router and PrintServer
Connect the Power Adapter to the
PrintServer and Electrical Outlet
Reconnect the Power to the Printer
Searching for the PrintServer

English : Print Server InstallationWPSM54G
5Wireless-G PrintServer
J. Select the appropriate
PrintServer. If you cannot find
the PrintServer, click Refresh
List.
Click Next.
NOTE: If the PrintServer
is already configured,
you will be prompted for
its password. Enter the
password, and click Enter.
K. If your network uses a router
that automatically assigns IP
addresses, select Automatically
obtain an IP address (DHCP).
Click Next.
If your network uses a static
IP address, select Set IP
configuration manually, and
enter the IP Address, Subnet
Mask, and Gateway in the fields
provided.
Click Next.
Select the PrintServer
Network Settings - Automatically Obtain
an IP Address (DHCP)
Network Settings - Set IP Configuration
Manually

English : Print Server Installation WPSM54G
6 Wireless-G PrintServer
L. Create a password and enter
it in the Password and Confirm
fields.
Click Next.
M. Select the wireless network
that the PrintServer should join.
If you do not see the wireless
network you want to use, click
Refresh and locate the network.
Click Next and go to step O.
If you want to manually enter
the settings for the wireless
network, click Manual Setup.
Click Next and go to step N.
N. If you clicked Manual Setup,
the Configure Wireless Settings
screen appears. Enter the name
of the wireless network.
Click Next.
Set the PrintServer’s Password
Select the Wireless Network
Enter the Name of the Wireless Network

English : Print Server InstallationWPSM54G
7Wireless-G PrintServer
O. The wireless security method
of your network should be
automatically selected. Proceed
to the instructions for your
wireless security method.
If wireless security is disabled,
keep the default, Disabled, and
click Next.
WPA-Personal (TKIP)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click Next.
WPA-Personal (AES)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click Next.
Wireless Security - Disabled
Wireless Security - WPA-Personal (TKIP)
Wireless Security - WPA-Personal (AES)

English : Print Server Installation WPSM54G
8 Wireless-G PrintServer
WPA2-Personal (TKIP)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click Next.
WPA2-Personal (AES)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click Next.
WEP (128-Bit) or WEP (64-Bit)
Enter a Passphrase that is no
more than 16 characters in
length. Click Next.
If you want to manually
enter the WEP key, leave the
Passphrase field blank and click
Next.
Wireless Security - WPA2-Personal (TKIP)
Wireless Security - WPA2-Personal (AES)
Wireless Security - WEP (128-Bit)

English : Print Server InstallationWPSM54G
9Wireless-G PrintServer
A new screen will appear.
If you entered a Passphrase, the
WEP key will appear.
If you did not enter a
Passphrase, enter the WEP key
in the Key 1 field.
Click Next.
P. Make sure your new settings are
correct.
To save the new settings, click
Next.
Q. The PrintServer’s settings will be
saved.
R. Disconnect the power adapter
from the PrintServer.
Click Next.
WEP Key
Confirm New Settings
Changing the PrintServer’s Settings
Disconnect the Power Adapter from the
PrintServer

English : Print Server Installation WPSM54G
10 Wireless-G PrintServer
S. Disconnect the Ethernet
network cable from the
PrintServer and router.
Click Next.
T. Reconnect the power adapter to
the PrintServer.
Click Next.
U. The PrintServer will connect to
your wireless network.
V. The PrintServer is now part of
your wireless network.
Click Next.
Next you need to install theW.
PrintServer driver on your
computer. Proceed to the next
section, “ 2: Driver Installation”.
Disconnect the Ethernet Network Cable
from the PrintServer and Router
Reconnect the Power to the PrintServer
Checking Your Network Connection
The PrintServer is Now Wireless

English : Driver InstallationWPSM54G
11Wireless-G PrintServer
Driver Installation2
Make sure that you have no other programs running on your computer.
A. Click Set up Computer.
B. The Setup Wizard copies driver
files to your computer. Please
wait.
C. The Setup Wizard locates the
PrintServer. Please wait.
Set Up Computer
Copying Files to Your Computer
Searching for the PrintServer

English : Driver Installation WPSM54G
12 Wireless-G PrintServer
D. Select the printer that is
connected to the PrintServer. If
you do not see the PrintServer
or printer, click Refresh.
Click Next.
E. The Setup Wizard will install the
PrintServer’s driver and re-install
the printer drivers.
Make sure that the printer is
connected to the PrintServer.
Click Next.
F. The Windows Found New
Hardware Wizard runs to install
the software for the PrintServer.
The Setup Wizard closes these
screens automatically. Please
wait.
Select the Printer
Install Additional Drivers
Installing the Software
Installing the Software, Continued

English : Driver InstallationWPSM54G
13Wireless-G PrintServer
G. The Windows New Hardware
Wizard is complete. Please wait.
H. The computer connects to the
PrintServer. Please wait.
Installing the Software, Complete
Connecting to the PrintServer
Connecting to the PrintServer, Continued

English : Driver Installation WPSM54G
14 Wireless-G PrintServer
I. The network printer driver is
installed and configured for use
with the PrintServer. Please wait.
This may take a few minutes.
Installing the Network Printer Driver
Installing the Network Printer Driver,
Continued
Verifying the Network Printer Driver
Installation
Verifying the Network Printer Driver
Installation, Continued

English : Driver InstallationWPSM54G
15Wireless-G PrintServer
J. The installation of the
PrintServer is complete. To print
a test page, click Test Print.
K. The Setup Wizard sends a test
page to the printer. Click the OK
button.
L. After the test page is printed,
click Finish.
If you clicked the Finish button
before the test page is printed,
a new window appears. Click
OK to continue printing the test
page, or click Cancel to cancel
the test page.
M. When you are prompted to
restart your computer, click OK.
Your computer is now ready to use the PrintServer and printer.
Print a Test Page
Test Page Being Printed
Click the Finish Button
Test Page Interrupted
Restart Your Computer

English : Driver Installation WPSM54G
16 Wireless-G PrintServer
To install the PrintServer on the other computers in your network, proceed
to step A. You must follow steps A-C for each computer.
CAUTION: Make sure you have set up your printer and installed
your printer’s driver on each computer before you install the
PrintServer. (To install the printer, use the CD that came with your
printer.) For successful installation of the printer, make sure you
connect the printer’s USB cable directly to your computer’s
USB port.
A. Insert the Setup CD-ROM into
the computer’s CD-ROM drive.
The Setup Wizard should run
automatically.
B. Click Click Here to Start.
C. Click Set up Computer.
Congratulations! The installation of the Wireless-G PrintServer
is complete.
Proceed to the next section, “3: How to Use the PrintServer”.
Insert the Setup CD-ROM
Welcome Screen
Set Up Computer

English:HowtoUsethePrintServerWPSM54G
17Wireless-G PrintServer
How to Use the PrintServer3
This section explains how to use the PrintSever through its utility.
Printing
Any time you start a print job, your computer will automatically connect to
the printer. You do not need to perform any additional steps.
Scanning, Faxing, or Reading Information from a Memory Card
To scan, fax, or read information from a memory card using the software
that came with your multifunction printer (if you have one), use the
PrintServer Utility to connect the computer to the printer.
NOTE: Each time you scan, fax, or read information from a
memory card, you must follow these instructions.
Follow these instructions:
A. Right-click the PrintServer
icon in the system tray of your
desktop.
B. A menu will appear. Click
Connect.
C. When the icon with waves is
displayed, the computer is
connected to the printer.
You can now scan, fax, or read
information from a memory
card inserted into the printer.
Icon Showing Availability Status
Click Connect
Icon Showing Connected Status

English : How to Use the PrintServer WPSM54G
18 Wireless-G PrintServer
D. When you are finished with your
scan, fax, or memory card, right-
click the PrintServer icon and
click Disconnect.
By default, the computer will be
disconnected one minute after
the scan or fax is completed.
PrintServer Icon and Its Functions
The following section discusses the PrintServer icon in further detail.
The PrintServer icon is located in the system tray of your desktop. The icon
can show three status options:
Icon Showing Availability
Status The green icon indicates
that the printer is available for use.
Icon Showing Connected Status
The green icon with waves indicates
that the computer is connected to
the printer and ready for use.
Icon Showing Offline Status The
red icon indicates that printer is
not available. Refer to“Appendix
A: Troubleshooting”of the User
Guide on the Setup CD-ROM for
instructions.
Click Disconnect
Icon Showing Availability Status
Icon Showing Connected Status
Icon Showing Offline Status