Linksys Instant EtherFast EPSX3 Original operating instructions

Package Contents
•One EtherFast 10/100 3-Port PrintServer
or
One EtherFast 10/100 1-Port PrintServer
(1)
•One Setup Utility CD-ROM (2)
•One Power Adapter (3)
•One User Guide (not shown)
•One Registration Card and Quick
Installation (not shown)
Instant EtherFast® Series
Installation Process
For more detailed instructions, please refer to the User Guide.
The PrintServer does not have a power switch. Whenever its power adapter
is plugged in, the PrintServer is powered on. The PrintServer can be pow-
ered on before, during, or after your network is powered on.
Connecting the PrintServer to Your Network
A. Plug one end of a UTP Category 5 (or better)
cable into the PrintServer’s LAN port.
B. Connect the other end of the cable to a net-
worked hub or switch.
Connecting a Printer to the PrintServer
C. Connect your printer to the PrintServer’s
Printer (LPT) port with your printer cable.
Repeat this step as needed for the 3-Port
PrintServer.
D. Turn on your printer.
Installing the PrintServer
Connecting the Power
E. Plug the power adapter into the PrintServer’s
Power port.
F. Plug the AC power adapter into the electrical
outlet.
G. The LAN LED on the PrintServer’s front will light up. If the LAN LED
does not light up, see the Troubleshooting section of the User Guide.
A. To begin driver installation click
Start and select Run. Type
D:\Driver\Win9xnt\setup.exe
(where “D” is the letter of your
CD-ROM drive) in the Open field
that appears. Click OK.
B. The Welcome screen appears. Read the text that appears and click Next.
C. Click Next to accept the default
Destination Directory (recom-
mended). If you choose to use
another directory, click Browse
and choose the appropriate direc-
tory. Then, click Next.
D. The following screen will assign a
Program Folder from the
Windows Taskbar. The default
Program Folder is the Linksys
PrintServer Driver. Click Next to
continue.
C
A
EtherFast 10/100
PrintServers
This Quick Installation is meant to help you install the product quickly and easily. For detailed instructions on installation,
configuration, and further setup options, please consult the User Guide.
EPSX3 ver. 2
PPSX1 ver. 2
Continued on back!
Installing the PrintServer’s Drivers
NNoottee: Make sure that IP addresses are assigned to the PrintServer and PC(s). The PrintServer is set
for DHCP by default.
C
D
A
E
NNOOTTEE::Only use the power adapter packaged with the PrintServer.
Using a different power adapter could damage the PrintServer.

I. The Add Printer Wizard screen
will come up at this point. Follow
the standard procedure for adding
printers under Windows. If you
have any questions on adding
printers, please refer to your print-
er’s documentation.
J. After your printer(s) have been
added, you will return to the
Configure Printer Port screen.
Click Connect to connect the
printer(s).
K.The Printer Port Setup screen will
appear again, displaying the print-
ers that are now communicating
with the PrintServer. Click Next to
add more printers, or Close to
complete the installation/configu-
ration procedure.
E. The driver installation is now com-
pleted, but the Print Driver still
needs to be configured. Check the
box beside Configure Print
Driver Now. Click Finish to con-
tinue.
F. Read the instructions on the screen. Click OK to continue.
G. The Print Port Setup screen dis-
plays the PrintServer and all of the
printers with which it communi-
cates. Here you have the option of
installing the printer by highlight-
ing its description and clicking
Next. You can also close this
screen by clicking Close.
H. This will display the Configure
Printer Port screen. Any installed
printers will be displayed in the
Existing Printers field. You can
install a printer by clicking Add
New Printer.
A. Insert the PrintServer CD into your CD-ROM drive.
Click Start and select Run. Type
D:\utility\biadmin\setup.exe
(where “D” is the letter of your
CD-ROM drive) in the Open field
that appears. Click OK.
B. When the setup program’s
Welcome screen appears, click
Next.
C. Enter the directory name where
you want the Bi-Admin program to
be installed. The default directory
of C:\Linksys\printserver is rec-
ommended. Click Next.
D. Continue with the setup program’s instructions.
Setup will copy the necessary files to your system.
Click OK to complete the setup.
E. To start the Bi-Admin
program, click Start, and
select Programs. Click
Linksys PrintServer
Admin, and choose Bi-
Admin. If the Bi-Admin
icon has been created,
you can just double-click
on it instead. You can
drag the shortcut icon
onto your Desktop for
easy access to the Bi-
Admin program.
You have successfully installed the PrintServer.
For configuration information or other details,
please refer to the User Guide.
QI-EPSX3ver2_PPSX1ver2-041202NC-JL
WWW.LINKSYS.COM
Installing the Bi-Admin
Management Utility
A
J
K
I
G
H
E
B
C
D
E