Linksys WRT54GP2 - Wireless-G Broadband Router User manual

Linksys Wireless Broadband Router set up guide –
model WRT54GP2
Step 1
Ensure all of your hardware is turned off, including the computer and
modem.
Step 2
Unplug the existing Ethernet cable from your computer, leaving the
other end still connected to your modem.
Step 3
Plug the unattached end of the Ethernet cable into the Internet Port of
your new router.
(The router should now be connected to the modem via the Ethernet cable
Step 4
Using the Ethernet cable that came with the router connect one end
into either LAN Port 1, 2, or 3 on the back. The other end of the cable
is to be plugged into the Ethernet port on your computer.
Internet Port
LAN ports

Step 5
Unplug your existing telephone handset from the wall socket.
Reconnect your telephone into phone port 1 on the back of the router.
Step 6
Connect the power supply and switch the device on.
Now Switch on your computer and modem.
Step 7
Open an Internet Explorer web browser on your computer and enter
192.168.15.1 into the address bar
Phone Port
Power supply port

Step 8
Enter your user name and password.
Step 9
Select ‘obtain IP automatically’ (DCHP , click save.

Step 10
Select PPPoE from the drop down box; enter your user name and
password provided by your ISP (Internet Service Provider . Select
‘keep alive’, click save.
Step 11
Unplug the power supply to your modem, wait five (5 seconds and
reconnect the power supply (wait for the lights to settle . Unplug the
power supply to the router, wait five (5 seconds and reconnect the
power supply.
Step 12
Perform a test to confirm your internet connection is active, enter a
web address into the web browser on your computer.
Select PPPoE from drop down
menu
Select keep alive

Step 13
Phone port one on the router, should now display a light, located at
the front of the device.
Pick up the handset of your telephone and listen for a strong flat tone
(this is the engin dial tone, it is a little different to what you are used
to
If the phone port light is not present or there is no dial tone, please
contact engin on 1300 305 000 as the device may require a
configuration file to be regenerated.
Alternatively go to our live chat service:
http://www.engin.com.au/help/LiveChat.aspx
To better assist you, please have ready:
1. Your engin account number or engin phone number
2. The IP address of your engin voice box
3. The make and model of your modem and router
Phone port lights