LINNO LYNC User manual

User Manual
Product Title : Bluetooth Remote Controller for
LINNO LYNC lighting system
LINNO Co., Ltd.

1. Introduction
1) The remote Controller which can adjust color(Kelvin) and brightness(Lux) of each
smart lighting group
2) BLE mesh technology is implemented and it is possible to control the light condition
without any ‘connection’ behavior.
3) A group information of lighting device is transferred from smartphone App to remote
controller.
2. Use
1) Detailed function of button
Color
change
Brightness
change
Group
selection
All ON/OFF Status LED

3. Electrical Spec
1) Bluetooth Ver4.0 BLE
2) Frequency : 2402 ~ 2480 MHz
3) BLE CPU : nRF51822 Rev.3 (Nordic Semiconductor)
4) Charging Voltage : 4.5V ~5.5V
5) Radiation Power : Max +4dBm
6) Receiving Sensitivity : -92dBm typ.
7) Antenna : Internal PCB type
8) ARM Cortex M0 32bit Processor
9) 256KB Memory, 32KB RAM
10) Lithum-Polymer Battery (300mAh)
11) Standby : 80days, Operation time : 20 hours
12) Operational Temperature : -20 ~ +70도
13) RoHS Compliant / Complete Lead Free
14) Size : T. B.D
15) Weight : T.B.D
4. Cautions
1) A/S and replacement is not allowed if it is disassembled intentionally
2) It is designed for LINNO LYNC system only.
3) It is weak to any kind of drop shock.
4) When battery is fully discharged, it is necessary to charge 2 hours at least.

FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user’s authority to operate the equipment.
RF exposure has been evaluated and has been excluded from SAR evaluation. Device can be used
with no distance restriction.