Linseis Chip DSC User manual

1
How To
Compare curves
with Chip DSC
Linseis Messgeräte GmbH
Gerlach
Stand: 13.10.2020

How To compare curves with Chip DSC
2
Index
1. General information ............................................................................................................................................................ 3
2. Set reference Curve for curve comparison ................................................................................................................ 3
3. Compare curves with curve comparison .................................................................................................................... 4
4. Add curve comparison to database ............................................................................................................................. 5
4.1. Add reference evaluation to database ......................................................................................................... 5
4.2. Show reference evaluation in your measurement ................................................................................... 6

How To compare curves with Chip DSC
3
1. General information
This manual is a short description of how to handle curve comparison tool for the Chip-DSC. With this
tool it is possible to save the evaluation of any reference curve and load this evaluation for different
curves you want to evaluate in the same way. This tool also shows the difference between reference
and sample curve. In addition it is possible to combine this tool with thermal library. For more
information, read the other available instructions about software or specific manuals for the Chip DSC.
2. Set reference Curve for curve comparison
o Load and select your reference curve and evaluate
o Select Add the selected curve evaluation as reference for curve comparison
o Confirm the evaluated transitions
o Save the curve evaluation

How To compare curves with Chip DSC
4
3. Compare curves with curve comparison
o Load and select curve you want to compare
o Select Compare DSC curves tool
o Choose the evaluation you want to compare
o Check results and modify evaluation if necessary

How To compare curves with Chip DSC
5
4. Add curve comparison to database
4.1. Add reference evaluation to database
o Create Database and curve comparison file as described before
o Edit your database (doubleclick on database)
o Select the material you want to link with curve comparison
o Right click on material and select “add reference evaluation”
o Select the right curve comparison file

How To compare curves with Chip DSC
6
4.2. Show reference evaluation in your measurement
o Load and select the curve you want to evaluate
o Search in database for material
o Select linked curve comparison evaluation