
1. About This Manual
1.1 Products Covered by This Manual
LV-AST-1L6K5.12Aa Series li-ion battery
1.2 Target Group
This document is intended for qualified electrician. Any electrical installation
and maintenance on this battery must be performed by qualified electricians in
compliance with standards, wiring rules or requirements of local grid
authorities or bodies.
1.3 Symbols Used
The following types of safety precautions and general information symbols
are used in this manual. These important instructions must be followed during
installation, operation and maintenance of the battery.
Indicates a hazard with a high level of risk
that will result in death or serious injury.
Indicates a hazard with a medium level of
risk that can result in death or serious injury.
Indicates a hazard with a low level of risk
that can result in minor or moderate injury.
Indicates a situation which, if not avoided,
can results in property damage.
1.4 Storage of the Manual
The manual should be stored with other documents belonging to the inverter
and must be available to people authorized to work on the installation.
This manual will be updated if necessary. Please check our website for more
information.
2. Safety
2.1 Intended Use
This document is valid for LV-AST-1L6K5.12Aa series battery, which has
integrated hybrid inverter with 1 ~ 6 battery packs. This document
describes the installation, commissioning, configuration, operation,
troubleshooting and decommissioning of the product.
Comply with the provisions of all documents shipped with the product, and
keep them properly to ensure that they are available at any time .
2.2 Important Safety Instructions
Danger to life from electric shock.
•
Before performing any work on the battery, make sure the battery is
power off and the DC isolator is disconnected.
•
Do not short connect the DC connectors of the battery, which may
cause electric shock to personnel and damage to the product.
•
Do not touch DC connectors of the battery.
•
If an error occurs, contact your local distributor or qualified
electricians.
•Only authorized service personnel are allowed to install the battery or
perform servicing and maintenance
•
The power should be disconnected before attempting any
maintenance or cleaning or working to the battery.
•
Do not open the battery cover or change any components without
authorization, otherwise the warranty commitment for the battery will be
invalid.
•
Appropriate methods must be adopted to protect battery from electrostatic
discharge; any damage caused by ESD is not warranted by the
manufacturer.
DANGER
!
DANGER
!
WARNING
!
WARNING
!
CAUTION
!
NOTICE
!
NOTICE
!