Little Seeds LS Monarch Hill 4540013COM User manual

inside for Assembly Manual
Check us out!
li•leseedskids.com TM
B344540013COM00

LS Monarch Hill 6 Drawer Dresser
4540013COM TM
2
Do NOT return this product!
For missing or broken parts
- Visit li•leseedskids.com
- Call 1-800-489-3351
Two Adults
recommended
for assembly This product is not intended for commercial use
Keep this Assembly Manual for future reference
Follow li•le seeds on

TM
li•leseedskids.com 3
Visit li•leseedskids.com to view the
limited warranty valid in the U.S and Canada
Helpful Hints
Do NOT return this product!
Contact our friendly customer service team first for help
Assembly Tips
- Open your item in the area you plan to keep it for less heavy li"ing
- Iden#fy, sort and count the parts before a•emp#ng assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (le") for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back Panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

TM
li•leseedskids.com 4
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Cau!on: If using a power drill or power screwdriver for screwing,
please beware to slow down and stop when screw is !ght. Failure
to do so may result in stripping the screw,
1
3
2
4

TM
li•leseedskids.com 5
Board Iden!fica!on
Not actual size
x1
T4540013010UD
TOP PANEL
x1
T4540013020UD
LEFT SIDE PANEL
x1
T4540013030UD
RIGHT SIDE PANEL
x1
T4540013040UD
BOTTOM PANEL
x1
T4540013050UD
TOP APRON
1
5
2 3
4
x1
T4540013060UD
BOTTOM APRON
6
x2
T4540013070UD
CENTER APRON
7
x6
T4540013080UD
LEFT DRAWER SIDE
8
x6
T4540013090UD
RIGHT DRAWER SIDE
9

TM
li•leseedskids.com 6
Board Iden!fica!on
Not actual size
16
x3
T4540013100UD
FRONT DRAWER LEFT
10
13
x3
T4540013110UD
FRONT DRAWER RIGHT
11
x6
T4540013120UD
BACK DRAWER
12
x6
T4540013130UD
DRAWER BOTTOM
x1
T4540013160UD
CENTER LEG
x6
T4540013140UD
DRAWER SUPPORT
x1
T4540013170UD
PARTITION
x1
T4540013150UD
BACK PANEL
14
17
15

TM
li•leseedskids.com 7
Part List
Actual size
x61
TUD0001
Cam Bolt
x61
TUD0002
Cam Lock
15-12
x16
TUD0004
DOWEL
M8 X 25
x25
TUD0009
CBS 4 x 38
x12
TUD0011
PH M4 X 12
x84
TUD0008
CBS 3.5 x 16

TM
li•leseedskids.com 8
Part List
Not actual size
Hardware Bag Reference Number: 24540013COM0UD
x24
TUD0006
NAIL
x1 SET
TUD0021
ANTI TIPPING KIT
x6
TUD0064
BIG SQUARE
HANDLE
x6 SETS
TUD0017
DRAWER SLIDE
350 MM

TM
li•leseedskids.com 9
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 1
x10
TUD0001
x4
TUD0002 x24 TUD0008
x4
TUD0004
2
2
3
3
x3 SETS
TUD0017
LEFT RIGHT

TM
li•leseedskids.com 10
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 2
x7
TUD0002
x4
TUD0004
x3 SETS
TUD0017
17
17 17
RIGHT HAND SURFACE
LEFT HAND SURFACE
x24
TUD0008

TM
li•leseedskids.com 11
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 3
x1
TUD0021
x7
TUD0001
x2
TUD0002
5
1
FRONT

TM
li•leseedskids.com 12
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 4
x8
TUD0001
x12
TUD0002 x8
TUD0004
4
6
16
x2
7
x1
TUD0009

TM
li•leseedskids.com 13
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 5
17
4
6
4
6
6
4

TM
li•leseedskids.com 14
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 6
4
17
7
7
5

TM
li•leseedskids.com 15
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 7
2
4
5
7
7

TM
li•leseedskids.com 16
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 8
3
2

TM
li•leseedskids.com 17
* raw edges are shaded
Proper orienta!on of CAM LOCK
Step 9
1
3

TM
li•leseedskids.com 18
Step 10
A•ached back panel as shown nailing straight into the raw edges.
Ensure that the unit is square.
Distance from corner to corner must be equal as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
x24
TUD0006
1
3
15

TM
li•leseedskids.com 19
* raw edges are shaded
Step 11
x36
TUD0002
8
9
14
x6
x6
x6

TM
li•leseedskids.com 20
* raw edges are shaded
Step 12
x36
TUD0001
12
10
x6
x3
x3
11
LEFT
RIGHT