Little Tikes TOBI 2 User manual
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.”If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
Show o for the camera! Use the HD Camera to take photos and
seles. Film fun videos with the green screen and add one of
40+ special eects. Make comic book pages and create stop
motion videos. Change your voice and add sounds to videos.
Play exciting games.
TOBI™2 DIRECTOR’S CAMERA
3
2
SELFIE STICK / TRIPOD
TOBI™2
DIRECTOR’S CAMERA
KEYPAD
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
CAMERA LENS
1. 2.4” Color LCD Screen HD Camera
2. Tripod/Sele Stick
3. Green Screen Fabric
4. Wrist Strap
5. Micro-USB Cable
To turn on the device, press and hold the home button for about 3
seconds until the screen turns on and a sound plays.
Prior to giving this product to a child, remove all packaging material
including plastic covers, tape, ties, tags and packaging locks. The
plastic cover over the camera surface is packaging material included
for protective purposes and should be removed prior to use.
CONTENTS
Only one Tobi™2 Director’s
Camera included. Multiple
shown for reference only.
SPECIFICATIONS
Battery Life Up to 2 hours
English, Spanish, French,
Dutch, German, Italian, Polish
Supported Languages
Lithium Polymer battery
(non-replaceable)
Connectivity
Wireless Connectivity: BLE connection
Tobi™2 Robot Smartwatch
Battery
Optimum Operating and
Charging Temperature
Micro-USB Cable: 2.0
(Included for connecting
to computer)
14ºF (-10ºC) ~ 104ºF (40ºC)
Screen Display 2.4” Color LCD
Focus Range 1.5’ – innity
Internal Memory
File Format
MicroSD card (not included):
Photo (JPEG), Video (MP4)
Up to 128GB, Class 10 or
above is recommended
256MB (shared with system data,
the actual memory for user will be less)
Memory Storage
Resolution
Storage
PHOTOS
VIDEOS
Resolution
2.0 MP
5.0 MP
720p
1080p
Internal
Memory
410
94
4 min 10 sec
2 min
1,060 min
640 min
32 GB
microSD Card
(Not Included)
160,000
45,700
Pixels
PHOTOS
VIDEOS
Low
Resolution
1600 x 1200
(2.0 MP)
-
-
Mid
Resolution
1280 x 720
(720p)
1920 x 1080
(1080p)
High
Resolution
2560 x 1920
(5.0 MP)
-
-
Compatible systems include Microsoft® Windows XP, Windows® 7, Windows®
8, and Windows® 10 Operating System or a Macintosh Computer with macOS
X version 10.13 and 10.14. Other operating systems may be compatible or
eligible for upgrade to a compatible system. USB port required.
SYSTEM REQUIREMENTS
NOTE: An adult must charge the device and connect to a computer.
Use the included Micro-USB Cable to connect the device to your
computer to transfer photos and videos, charge the device and update the
rmware.
1. Open the cover over the Micro-USB port on Tobi™2 Director’s Camera.
2. Insert the Micro-USB side of the cable into the port.
3. Insert the large USB end into a USB port on your computer.
NOTE: The camera will not be accessible when the Micro-USB is plugged in.
MICRO-USB
Prior to use, it is recommended that you fully charge Tobi™2 Director’s
Camera for optimal performance.
NOTE: The device should be OFF prior to charging. To power OFF, hold
the home button for about 5 seconds, until a sound plays and the
device shuts off.
1. Insert the larger end of the Micro-USB cable into a USB port on your
computer.
2. Lift open the cover over the Micro-USB port on Tobi™2 Director’s
Camera and insert the Micro-USB cable into the port.
3. A battery symbol will turn green on the screen once the device is fully
charged. Remove the device from the Micro-USB cable. Do not over
charge the battery.
4. You can now turn on the device and begin playing.
Open the port cover on the side of Tobi™2 Director’s Camera
and plug the Micro-USB end of the cable into the port. Plug
the charging cable into the USB port on your computer.
• See page 23 for more BATTERY INFORMATION.
NOTE:
BATTERY CHARGING
Open the port cover on the side of Tobi™2 Director’s
Camera and insert a microSD memory card.
5
4
After about a minute of inactivity, the camera will turn o. Press the
home button once to wake up the device.
WAKING UP TOBI™2 DIRECTOR’S CAMERA
Before beginning, it is important to check for any available rmware
updates so that the Tobi™2 Director’s Camera is operating optimally. To
update the rmware on your device:
1. On your computer, visit WWW.LITTLETIKES.COM/TOBI2-CAMERA and
download the Firmware Installer.
2. Turn o the camera. To turn o the device, press and hold the home
button on the front of the device for about 5 seconds until a sound
plays and the screen turns o.
3. Follow the steps on page 4 to connect the Micro-USB Cable to the
camera and your computer.
4. On the Firmware Installer, click on Firmware Update. A progress bar
will appear on your computer’s screen, or, if your watch is up-to-date, it
will say “Firmware is up to date.” If it is up-to-date, properly eject the
device from your computer.
5. Once the progress bar on your computer shows it is complete,
properly eject the device from your computer. Then, remove the
Micro-USB Cable.
NOTE: After the camera cycles back on, it is recommended you turn the
device o and back on again to conrm the update was successful.
FIRMWARE UPDATE
STARTING UP TOBI™2 DIRECTOR’S CAMERA
To turn on the device, press and hold the home button on the front
of the device for about 5 seconds until the screen turns on and a
sound plays.
When you rst start the camera, ensure the rmware is up-to-date.
Make sure the device is fully charged (see page 4).
For more information on how to set these features, see SETTINGS on
pages 19-20.
MICRO-SD MEMORY CARD
To store more photos and videos, insert a microSD memory card into the
slot above the USB port. (Micro-SD memory card is not included.) See
page 3 for more information on the memory storage.
It is recommended to use a 32GB microSD card with the camera.
7
6
The device should be OFF prior to transferring files. To power OFF, hold the
home button for about 5 seconds until a sound plays and the screen turns o.
Plug the device into your computer using the included Micro-USB cable, and
follow the instructions on page 4.
On your computer, you will see a removable drive called TOBI2 DIRECTOR’S
CAMERA.
Click on this drive to transfer les from the device to your computer using the
folders called PHOTOS and VIDEOS. Copy and paste the les in these folders
to the desired location on your computer. TIP: Photo and video les will not
be deleted from Tobi™2 Director’s Camera until you manually delete them on
the device by pressing the trash can button in the photo and video apps.
You cannot load photos or videos from other devices onto the camera, as the
le types may not be compatible.
NOTE: Once the device is connected to your computer, do not disconnect the
camera or the cable while les are transferring. Once your camera completes
the transfer, properly eject the device from your computer. Then, physically
disconnect the cable and the camera.
TRANSFERRING FILES FROM THE CAMERA
USING THE CAMERA
NOTE:
The camera can be used two ways. To use it as a sele camera, ip up the
camera lens. When using in its front-facing position, slide it back down.
Front-Facing
Camera Position Selfie Camera Position
For your security, the camera and microphone on your device will be
disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug
the Micro-USB cable, and turn the device on before using these features.
9
8
Tobi™2 Director’s Camera can be used one of three ways: handheld
device, sele stick or as a tripod. Follow the instructions below to
use with the sele stick or tripod.
USING THE SELFIE STICK/TRIPOD
To attach the sele stick/tripod,
twist the screw on top of the stick
into the bottom of the camera.
Keep turning until it feels secure.
To adjust the camera, loosen the
knob and move the camera
forward or backward. Turn the
knob to tighten and secure.
To convert the sele stick into the
tripod, pull the legs out.
Push them back in to revert
back to the sele stick.
Press and hold the home button on the keypad of the camera
for about 3 seconds to turn it on. To turn o the camera, press
and hold the button again for 3 seconds.
In normal play, pressing the home button will return to the previous
screen. Continuously pressing it will go back to the main menu.
Home Button
KEYPAD BUTTONS
Press the left, right, up or down arrows to
navigate through the screen’s icons.
Directional Buttons
If options icon is visible in the lower left corner, press
the Options button to discover available options.
Options Buttons
Press the Enter button to select the mode.
Enter Button
Press to delete pictures or videos. After
pressing, two icons will appear. A check mark
and an X icon. Check mark is to delete and the
X icon will cancel the request to delete.
Delete Button
HOME ENTER PLAY
OPTIONS
DIRECTIONAL
BUTTONS
DELETE
11
10
VIDEO MENU
REMEMBER: For your security, the camera and microphone on your device will
be disabled when connecting to a computer with the Micro-USB Cable, as the
device must be off. Properly eject the device from your computer, unplug the
Micro-USB cable, and turn the device on before using these features.
00 00:
Filming Videos
• To access the video camera, scroll
through the Menu with the
directional buttons and then press
Enter button to select the video icon.
• To record seles or Point of View (P.O.V.) videos,
press the Shutter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Video Special Eects
• Before you begin recording, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
begin recording.
00 00:
CAMERA MENU
Taking Pictures
• To access the camera, scroll
through the Menu with the
directional buttons and then press
Shutter button to select the camera icon.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
Photo Special Eects
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Once the desired eect is on the screen,
take a picture.
STOP MOTION MENU
Creating Stop Motion Videos
• To access the stop motion menu, scroll
through the Menu with the directional
buttons and then press
Enter button to select the stop motion icon.
• Capture frames by pressing the Shutter button.
• Each frame will appear at the bottom of the
screen. To erase any of the frames, use the
directional buttons and press the Delete
button. Then, press the check mark to
complete the action.
Play/Save Stop Motion
• To play stop motion video, press the Option button. Then move the directional
buttons to the play icon and press the Enter button to select it.
• To save the video, press the Option button. Then move the directional buttons to
the save icon and press the Enter button to select it.
Play Save
AUDIO RECORD MENU
00 1
00 00:
Play Save
Recording Audio
• Press the Shutter button to begin recording.
Press it again to stop recording.
• To delete the audio, press the Delete button and
then the check mark to conrm the action.
Play/Save Audio:
• To play audio, move the directional buttons to
the play icon and press the Enter button to
select it.
• To save audio, move the directional buttons to
the save icon and press the Enter button to
select it.
00 00:
Adding Audio Filters
After recording an audio file, choose a filter to change how it sounds.
• Press the Option button. The lters will appear on the bottom of the screen.
• Use the directional buttons and press the Enter button to select it.
Normal
Robot
Slow
Fast
Squeaky
STICKERS MENU
13
12
Creating Stickers
Create unique stickers with objects around
your room!
• To access the stickers, scroll through the Menu
with the directional buttons and then press
Enter button to select the sticker icon.
• Set up the included green screen fabric
behind an object.
• When prompted to use the green screen
background, press the Enter button.
• Press the Shutter button to take the picture.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer
time.
Save/Delete Stickers
• To save stickers, press the Option button. Then move the directional buttons to
the save icon and press Enter to select it.
• To delete the sticker, press the Option button. Then move the directional
buttons to the delete icon and press the Enter button to select it.
GREEN SCREEN MENU
Creating Videos
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To record seles or P.O.V. videos, press the
Enter button. Press it again to stop
recording.
• Press the up or down button to trigger
the camera and take a picture.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Create videos or take pictures with the green screen! To access the green screen,
scroll through the Menu with the directional buttons and press the Enter button
to select the green screen icon. Then, scroll between the video or camera icons
with the directional buttons and press the Enter button to select it.
00 00:
Taking Pictures
• Scroll through 40+ background options
and press the Enter button to select it.
• When prompted to use the green screen
background, press the Enter button.
• To take seles or P.O.V. pictures, press
the Shutter button.
• Press the up or down button to zoom in
and out on the screen.
• To activate the timer, press the Option
button. Use the left or right buttons to
select timer time.
Filters
Choose between five different sound filters.
15
14
EDITOR MENU
Editing Videos
• To access the editor, scroll through the
Menu with the directional buttons and
press the Enter button to select the editor icon.
• Choose a video to edit by scrolling
through the videos and pressing the Enter
button to select it.
• After choosing the video, scroll through
the editing options and choose one.
• After editing the video, choose the play button
to play the edited video.
• Choose the save icon to save the edited video.
TRIM VIDEO:
• Press the Play button and start the video.
• Move the left or right buttons to move
through the frames that you want to trim.
• Press the Enter button to trim.
ADD SOUND EFFECTS:
Add movie opening music, background music
or your own recorded audio.
• Select one of the three sound icons
• Scroll through the different sound options
and select the desired sound.
Movie Openings: The movie opening audio will start at the
beginning of the video. It will stop as soon as the first frame ends.
Background Music:The music will continue in a loop until the video ends.
Recorded Audio:The audio will play until it is over or the video ends.
ADD TITLE:
• When the keyboard appears, press the directional and Enter button to type a title.
• Press the“enter” to save the title.
• The title will appear at the beginning of the video.
Shutter button can be used to take pictures in camera mode, record
videos in video mode, or record audio in audio record mode.
Shutter Button
HAND GESTURE
Activate the video recording with a simple hand
gesture. Make a peace sign with your ngers in front
of the camera. Then, bend the two ngers up and
down like a quotation gesture. The camera will begin
recording. To stop recording, repeat the gesture.
Use the on-screen icons to select from a variety of special eects,
features, and games.
To exit and return to the Menu, press the home button.
There are 12 main menu screens. Press left or right buttons on the keypad to
navigate between the menu screens. There are two menu pages and it will scroll
through the top and bottom icons before moving on to the second menu screen.
MENU
VIDEO
AUDIO
RECORD
CAMERA
STICKERS
GREEN
SCREEN
STOP
MOTION
EDITOR
GALLERY
GAMES
MASKS
SETTINGS
COMICS When filming videos or taking pictures with the green screen,
extend the green screen fabric and stand in front of it.
Save
Trim
Sound
Eects Title Play
My New Video
My New Video
SHUTTER
BUTTON
Press to play videos while in the Gallery.
Play Button
WRIST STRAP
NOTE: The device has to have a minimum of 20% battery power
when updating the rmware. It is recommended to insert a
microSD card (not included)with more than 50MB free space to
start the update.
12:45 pm
12:45 pm
Option Save
NOTE: When adding a microSD card, the camera will automatically restart.
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
Other manuals for TOBI 2
1
Table of contents
Other Little Tikes Digital Camera manuals
