FCC Information to User
Caution
IC Information to User
This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However
,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE
PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
IMPORTANT NOTE : FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 0.5 centimeters between the radiator and
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter
.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(
1)This device may not cause harmful interference, and (2) this device must accept any interference received
,
including interference that may cause undesired operation.This device complies with Industry Canada’s licence-
exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference
that may cause undesired operation of the device Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.
Attention: Tout changement ou modication non expressément approuvé par le fabricant peut annuler le droit de
l'utilisateur à utiliser l'équipement. exposition aux rayonnements radiofréquences. Pour se conformer aux exigences
de conformité de l'exposition IC RF, une distance de séparation d'au moins 0.5 cm doit être maintenue entre l'antenne
de cet appareil et toutes les personnes
Livescribe Inc. SAFETY & HANDLING
Important Safety Information
Handle the Livescribe smartpen with care. It contains sensitive electronic components, including batteries, and can
be damaged, impair functionality, or cause injury if dropped, burned, punctured, crushed, disassembled, or if
exposed to excessive heat or liquid or to environments having high concentrations of industrial chemicals, including
near evaporating liquified gasses such as helium. Don’t use damaged Livescribe smartpen.
Bluetooth® : To turn off Bluetooth® on the Livescribe smartpen, disable/unpair from Mobile Device.
Batteries :
Don’t attempt to replace the Livescribe smartpen batteries yourself. You may damage the batteries
,
which could cause overheating and injury.
Charging :
Charge the Livescribe smartpen with the charging cable and a power adapter or computer. Only charge
with an adapter that is compliant with applicable country regulations and international and regional safety standards
,
including the International Standard for Safety of Information Technology Equipment (IEC 60950-1). Other adapters
may not meet applicable safety standards and charging with such adapters could pose a risk of death or injury.
Do not charge using Automobile auxiliary power outlet. Using damaged cables or chargers, or charging when moisture
is present, can cause fire, electric shock, injury, or damage to the Livescribe smartpen or other property.
Choking Hazard : The small parts included with the Livescribe smartpen may present a choking hazard or cause
other injury to small children. Keep them away from small children.
Medical Device Interference : The Livescribe smartpen contain components and radios that emit electromagnetic
fields. Livescribe smartpen also contain magnets. These electromagnetic fields and magnets may interfere with
pacemakers, defibrillators, or other medical devices. Maintain a safe distance of separation between your medical
device and Livescribe smartpen. Consult your physician and medical device manufacturer for information specific
to your medical device. Stop using Livescribe smartpen if you suspect they are interfering with your pacemaker
,
defibrillator, or any other medical device.
Prolonged Heat Exposure : Avoid prolonged skin contact with a device, its power adapter, and the charging
cable and connector when plugged into a power source, because it may cause discomfort or injury. For example
,
while the Livescribe smartpen is charging using the charging cable and a power adapter, don’t sit or sleep on the
smartpen, charging cable, connector, or power adaptor, or place them under a blanket, pillow or your body. Take
special care if you have a physical condition that affects your ability to detect heat against your body.
Skin Irritation :
Livescribe smartpens can lead to skin irritation if not properly cleaned. Clean Livescribe smartpens
regularly with a soft lint-free cloth. Don’t get moisture in any openings, or use aerosol sprays, solvents, or abrasives.
If a skin problem develops, discontinue use. If the problem persists, consult a physician.
Support : For support and troubleshooting information and the latest software downloads, go to www.livescribe.com
Disposal and Recycling Information : The symbol above means that according to local laws and regulations
your product and/or its battery shall be disposed of separately from household waste. When the Livescribe
smartpen reaches its end of life, take it to a collection point designated by local authorities. The separate
collection and recycling of your Livescribe smartpen and/or its battery at the time of disposal will help
conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment
.
Battery Disposal Information : Dispose of batteries according to your local environment laws and guidelines.
The lithium-ion batteries in your Livescribe smartpen should be disposed of separately from household waste
.
For information about Livescribe’s lithium-ion batteries, go to www.livescribe.com
