Living Earth Crafts Luma Nailspace User manual

Luma Nailspace
USER MANUAL
1-400-0030 • Rev B • 9/26/18
© Earthlite 2018, All Rights Reserved
*shown with op onal accessories and/or fi nishes

2
Product Overview
Surge
Protector
Ventilation Port
(Optional)
Slimline Table Lamp
PowerPort
Outlet
(Optional)
Glass
Work Surface
Ventilation Port
(Optional)
PowerPort Outlet (Optional)

3
LED lamp insert Power connector
The LED Slimline Table Lamp connects easily into the lamp insert on the top counter of your desk
(see image below). The power connector clicks into the side of the lamp. Aer making both con-
necons, the lamp is ready to use.
Power Button
LED Slimline Table Lamp
Power Button

If you ordered the integrated venlaon system, it will need to be connected to a oor vent line.
See technical drawings below showing connecon points.
Ventilation System (Optional)
NOTE: INSTALLER/OWNER BEARS ALL RESPONSIBILITIES TO COMPLY WITH ALL STATE AND
LOCAL CODES FOR ELECTRICAL AND VENTILATION WHEN INSTALLING THIS PRODUCT.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY VOID WARRANTY.
A licensed electrician must make the electrical connecons for this product.
4

5

Power Requirements
Spec North America Europe/Asia
Input Voltage 120 VAC 220 VAC
Input Frequency 60 Hz 50 Hz
Power Port Rang 15 Amps Max 15 Amps Max
*Other plugs also
available for various
countries
• Clean anodized aluminum surfaces with warm water and mild soaps such as those used
for hands or 409® Glass & Surface Cleaner and warm water with a mild soap such as
those used for hands or dishes.
• Household cleaners, non-ammoniated detergents, or glass cleaners may be used.
• Stubborn stains may be removed with a thin, clean oil and a dry cloth.
• Aer cleaning, always wipe the surface completely dry with a so, clean cloth.
• Do NOT use cleaners that contain abrasives, acids or alkalis, as they will mar the surface.
• Ammoniated detergents or petroleum-based cleaners should not be used to clean anod-
ized aluminum surfaces.
• Do NOT clean metal face with solvents, paint thinner or adhesive remover.
Laminate Care & Maintenance
6

Notes
7

Contact Us
Living Earth Crafts
990 Joshua Way
Vista, CA 92081
[phone]
[phone] Int’l
[phone] fax
[email protected]
Hours of operation:
Monday - Friday
8:00 a.m. to 5 p.m. PST
Saturday - Sunday
Closed
Visit us online at: livingearthcrafts.com
Read our blog at: livingearthcrafts.com/blog
Join us on Facebook®