
User manual
5
9. Switch the control knob to the osition of and discharge the remained ressure.
If you need to use it again, please wait for 3 minutes after releasing the steam.
Warning: Do not turn or take away the filter handle when making coffee in order to avoid scald.
Making cappuccino :
1. Switch the control knob to osition, unscrew the to cover to add the right amount of water,
and screw the to cover of the coffee machine.
2. Pour the ice milk into latte cu . Because the milk volume will ex and 2-3 times after foaming, so
lease select the a ro riate cu .
3. Switch the control knob to the osition of " " and the indicator light is on. After 1 minute, the
steam tube starts to release the steam. When the steam comes out, firstly lease s ray it to clear
away the remaining hot water inside the tube. After seeing the water dro s coming out from the
tube, switch the knob to the "PAUSE" osition.
4. Immerse the to of the steam tube to 1/3 osition of the milk, and switch the control knob to the
osition of " ".
Gradually move the to of the steam tube to the lace where is just beneath the
milk surface, but it could be not higher than the surface.
5. When the milk foam is rich enough, ut the steam tube dee into the milk and make the milk
tem erature rise to about 66℃, and then the milk foaming rocess is com leted. Switch the
control knob to "PAUSE" osition and then remove the cu .
6. Firstly, our the es resso coffee into the coffee cu , and then the foamed milk into the coffee cu .
By now the ca uccino coffee is done.
Note: After making steam in milk, lease make steam one more time to clean steam tube in order to avoid
block. You can use in to dredge steam tube if it is blocked.
WARNING : HANDLE WITH CAUTION – BURN HAZARD
CLEANING AND STORAGE
1. Cleaning filter
Filter should be cleaned after making 100 cu s coffee. Take out filter from filter handle, clean all
arts with hot water and brush, make sure all holes on filter is o en, lease use in to o en the
hole if it is necessary.
2. Descaling:
After making 200 cu s coffee, it is better to descale the a liance.
•Pour the water with descaling liquid into tank.