LJU FB-606 User manual

Instruction
Manual
LJU Automatisierungstechnik GmbH
FB-606
FB-606 TF
Infrared Manual Remote Control

BDA_0002_FB-606_en
© LJU Automatisierungstechnik GmbH
Am Schlahn 1
14476 Potsdam
Germany
Tel.: [phone] / 414-0
Fax: [phone] / 414-19
E-mail: [e-mail]
Internet: www.ljuonline.de | www.grenzebach.com
The standard names, trade names, product names etc. used in this description may also be brand
names even when not specially indicated and, as such, are subject to the statutory stipulations.
Translation of the original document
October 2016

Instruction manual
FB-606
Table of contents
BDA_0002_FB-606_en
3
Table of contents
1General information and safety ................................................................................................. 5
1.1 Information about the manual............................................................................................. 5
1.2 Symbols in the Documentation........................................................................................... 6
1.3 Limitation of liability............................................................................................................. 7
1.4 Copyright............................................................................................................................. 7
1.5 Conformity........................................................................................................................... 7
1.6 Proper use........................................................................................................................... 8
1.7 Spare parts and repair ........................................................................................................ 8
1.8 Warranty.............................................................................................................................. 9
1.9 Customer service................................................................................................................ 9
1.10 Modifications and alterations .............................................................................................. 9
1.11 Personnel and qualification............................................................................................... 10
1.12 Disposal instructions / environmental specifications......................................................... 10
1.13 Battery disposal................................................................................................................. 10
2Characteristics and design ...................................................................................................... 11
2.1 Characteristics .................................................................................................................. 11
2.2 Design............................................................................................................................... 12
3Operation of the FB-606 ........................................................................................................... 13
3.1 Switching On/Off............................................................................................................... 13
3.2 Selection of the transmission speed................................................................................. 13
3.3 Functioning........................................................................................................................ 14
3.4 Remote control.................................................................................................................. 14
3.5 Acknowledge errors .......................................................................................................... 15
4Data sheet FB-606..................................................................................................................... 16

BDA_0002_FB-606_en
4

Instruction Manual
FB-606
General information and safety
BDA_0002_FB-606_en
5
1General information and safety
1.1 Information about the manual
This manual contains technical information and operating notes about devices of the type:
FB-606 Infrared Manual Remote Control
FB-606 TF Infrared Manual Remote Control tropicalized
It gives important information about the device.
Please read this manual carefully before using the device!
It will ensure smooth operation and prevention of errors, defects and damage to the system. Moreo-
ver, universal safety and accident prevention specifications must be implemented at sites where the
devices are in use.
The manual includes important instructions regarding the operation and safety; it is a part of the prod-
uct and must readily available, close to the device, so that it is accessible to the personnel at all times.
Every person who is assigned to work on or with the device must have read and understood this man-
ual before working with the device. This is mandatory even if the concerned person has already
worked with such a device or the like, or has been trained by the manufacturer.

Instruction manual
FB-606
General information and safety
BDA_0002_FB-606_en
6
1.2 Symbols in the Documentation
There are warning instructions and symbols in this description. It is absolutely mandatory to comply
with these and follow them. These are working aids and they will warn you of possible damage to
property and personnel. Always follow these instructions. Moreover, always follow the universal safety
specifications and accident prevention specifications.
Warning!
This symbol along with the signal word “Warning” refers to a potentially dangerous
situation that can lead to serious injuries or fatality if it is not avoided.
Caution!
This symbol along with the signal word “Caution” refers to a potentially dangerous
situation that can lead to minor injuries and damage to property if it is not avoided.
Note!
This symbol indicates that there are additional and important information and tips on
the relevant topic.
See also!
This symbol indicates that other detailed descriptions on the particular topic are avail-
able or provides references to other sections in this documentation.

Instruction Manual
FB-606
General information and safety
BDA_0002_FB-606_en
7
1.3 Limitation of liability
All data and instructions in this description have been compiled taking into consideration the applica-
ble standards and specifications, the state-of-the-art technology and our knowledge and experience
gained over the years.
LJU Automatisierungstechnik GmbH is not liable for any damage or operational disorders arising due
to:
Non-compliance with the description
Improper use
Employment of untrained personnel
Independent remodelling and modification of the device
Moreover, non-compliance with the description absolves LJU Automatisierungstechnik GmbH of the
warranty obligation.
1.4 Copyright
The contents of this description should be treated as confidential. It is meant solely for persons work-
ing with the device. Handing over this technical document to third parties without written permission of
the manufacturer is not allowed.
Note!
The content details, texts, drawings, images and other illustrations of the description
are protected by copyright and are subject to the industrial property rights. Any im-
proper utilization is punishable by law.
1.5 Conformity
Devices made by LJU Automatisierungstechnik GmbH have been designed to comply with EU direc-
tives.
Please contact LJU Automatisierungstechnik GmbH if you wish to obtain a copy of these EU declara-
tions of conformity.

Instruction manual
FB-606
General information and safety
BDA_0002_FB-606_en
8
1.6 Proper use
The infrared manual remote control FB-606 is only used to manually control LJU controllers (e.g. LJU
vehicle controllers) that have the accompanying software and are fitted with a LJU infrared interface.
Warning!
Danger due to improper use!
Any improper use and/or different use of the device can lead to dangerous situations.
Therefore:
- Only use the device in a proper manner.
- Under all circumstances, comply with all technical data and permissible conditions
at the site of operation.
- Do not deploy the device in areas with explosion hazard and in environments with
hazardous oils, acids, gases, vapors, dust, radiation, etc.
1.7 Spare parts and repair
Warning!
Risk of injury due to spurious spare parts and incorrect repair!
Spurious or faulty spare parts and repair can lead to damage, malfunctions or total
failure and can impair safety.
Therefore:
- Use only original spare parts of the manufacturer.
- Replace defective devices immediately and send them in for repair.
When ordering a spare part,specify the plant number WNR
of the component and send it to the address given on the inner
side of the covering sheet (page 2). The plant number is given
on the type plate of the individual components.
(see figure)
Send in the defective device for repair with a short description of the error scenario to the address
given on the inner side of the covering sheet (page 2).

Instruction Manual
FB-606
General information and safety
BDA_0002_FB-606_en
9
1.8 Warranty
The warranty covers only manufacturing defects and component defects.
The manufacturer is in no way responsible for damage during transit or unpacking.
In no case and under no circumstances shall the manufacturer be liable under warranty for defects or
damage caused by improper use, incorrect installation or impermissible operating conditions, or due to
dust or aggressive substances.
Consequential and accidental damage are excluded from the warranty.
The warranty is valid for 12 months from the commencement of operation, however, maximum 24
months after delivery.
Resellers or distributors may negotiate different warranty periods in accordance with their terms and
conditions of sale and delivery.
If you have further questions relating to the warranty, please contact your supplier.
1.9 Customer service
Our customer service is available to provide technical information.
Information about the responsible contact persons can be obtained via telephone, fax, e-mail or the
Internet; see contacts on the inner side of the covering sheet (page 2).
1.10 Modifications and alterations
To avoid danger and to ensure optimal performance, no modifications, remodelling or add-ons are
allowed on the device unless expressly approved by LJU Automatisierungstechnik GmbH.
Warning!
Risk of injury due to design modification!
Unauthorized technical modifications can lead to considerable damage to persons and
property.
Therefore:
- Replace the defective device!
- Replace it with an LJU device of the same model.

Instruction manual
FB-606
General information and safety
BDA_0002_FB-606_en
10
1.11 Personnel and qualification
Warning!
Risk due to improper use!
Improper operation can lead to serious damage to persons or property.
Therefore:
- It may be operated only by qualified technical personnel.
- During manual operation, ensure that there is no risk to persons from the manual
operation and that there are no persons in the working area of the vehicle.
1.12 Disposal instructions / environmental specifications
Provided no agreement for take-back or disposal has been made, the individual components of the
device must be appropriately dismantled, segregated and disposed of or recycled according to the
current stipulations.
Materials marked with the recycling symbol or green dot have to be
disposed of using the appropriate recycling method.
1.13 Battery disposal
The device contains batteries.
Dispose of them according to applicable provisions:
Do not dispose of batteries as domestic waste.
Dispose of batteries at local collection points or have a professional
company dispose of them.
Do not short circuit batteries.
Tape battery contacts.

Instruction Manual
FB-606
Characteristics and design
BDA_0002_FB-606_en
11
2Characteristics and design
2.1 Characteristics
The infrared manual remote control FB-606 is used to manually control and remote control LJU con-
trollers that have the accompanying software and are fitted with a LJU infrared interface. (e.g. LJU
vehicle controllers)
The FB-606 supports two IR transmission speeds. Therefore it is compatible with LJU vehicle control-
lers of the 5xx, 6xx and 7xx series as well as LJU vehicle controllers of the latest generation 8xx.
The remote control permits the switching of LJU controllers to manual mode (hand mode) so that e.g.
a vehicle can be moved manually using various commands.
Thus, commands such as “Travel forwards/backwards” and “Hoist/Lower” can be given by pressing
the relevant buttons.
It is also possible to acknowledge errors using the manual remote control.
The various commands are transmitted to the LJU controller using coded IR signals. These signals
are controller-dependent.
Functions!
The functions of the manual remote control are specific to projects.
The assignment of buttons to your LJU controller is given in the separate descriptions
to your controller.

Instruction manual
FB-606
Characteristics and design
BDA_0002_FB-606_en
12
2.2 Design
The housing of the infrared remote control FB-606 is made of impact-resistant plastic.
The Keypad with 6 buttons on the remote control is simply to use and protected, which helps
prevent the buttons from being accidentally pressed.
The status of the remote control is monitored with a control LED.
IR transmit diodes for infrared transmission are located at the front of the device.
Die Power is supplied by a 9V block battery. The battery can be changed in the battery
compartment on the underside of the device.






Instruction Manual
FB-606
Operation of the FB-606
BDA_0002_FB-606_en
13
3Operation of the FB-606
Warning!
Risk due to improper use!
Improper operation can lead to serious damage to persons or property.
During manual operation, ensure that there is no risk to persons from the manual op-
eration and that there are no persons in the working area of the vehicle.
3.1 Switching On/Off
The infrared manual remote control FB-606 has no switch ON/OFF.
Using a button on the remote control, commands are sent immediately.
The buttons on the remote control are recessed, which helps prevent the buttons from being acci-
dentally pressed.
3.2 Selection of the transmission speed
The infrared manual remote control FB-606 supports two infrared transmission speeds.
Mode
Description
Fast infrared
Control-LED is blinking fast
Transmission rate 62500 bit/s
e.g. for controllers of the 6xx, 7xx and 8xx series
Slow infrared
Control-LED is blinking slow
Transmission rate 9600 bit/s
e.g. for controllers of the 5xx series
Select the transmission speed by pressing a hot key. The currently active mode is shown with the con-
trol LED.
1. Change “Slow infrared“:
Press the buttons , and simultaneously for 5 sec. until the control LED on the remote con-
trol is blinking slow.
2. Change “Fast infrared“:
Press the buttons , and simultaneously for 5 sec. until the control LED on the remote con-
trol is blinking fast.

Instruction manual
FB-606
Operation of the FB-606
BDA_0002_FB-606_en
14
3.3 Functioning
The 6 operating buttons on the remote control are used to remote control LJU controllers and to
acknowledge errors.
The commands are transmitted via infrared. The control LED of the remote control is blinking when a
command is sent!
For remote control or acknowledge errors, the IR transmit cone must be directed with a tolerance of
+/- 20° towards the display window of the LJU controller.
The range of the remote control to the receiver is at least 6 m.
at least
6 m
± 20 °
3.4 Remote control
Devices with LJU controllers can be operated remotely via the infrared interface in the LJU controller
display using the remote control. That means functions like driving can be manually controlled using
them.
To switch the controller in manual mode (hand mode) press the button of the remote control.
If the controller is in a manual operating mode, this is displayed by a flashing “H” in the controller dis-
play.
Button assignment!
The functions of the buttons are specific to projects.
An example is shown in the following table (see next page).
The assignment of buttons to your controller is given in the separate descriptions to
your controller.

Instruction Manual
FB-606
Operation of the FB-606
BDA_0002_FB-606_en
15
Example button assignment:
Button
Function

Switching to manual mode resp. error reset
#
Normal mode (automatic mode)

Travel forward slow

Travel forward fast

Travel backward slow

Travel backward fast

Hoisting slow

Hoisting fast

Lowering slow

Lowering fast
Note!
two buttons: press the buttons simultaneously
Note!
Special function  -button!
Normally commands are buffered by the controller software.
Release all buttons and press the  -button immediately, the last command is break-
ing (clear buffer memory) and the movement will be stopped immediately.
3.5 Acknowledge errors
By switching the controller in manual mode “H“ and back to automatic mode errors can be acknowl-
edged.
Only acknowledge errors after troubleshooting.

Instruction manual
FB-606
Data sheet FB-606
BDA_0002_FB-606_en
16
4Data sheet FB-606
General
Type
FB-606
FB-606 TF
WNR
60060830
60608103
Housing
impact-resistant plastic
Colour
black
Dimensions H x W x D
145 mm x 65 mm x 26 mm
Weight
120 g
IP protection class
IP 30
Status
1 x LED red
Number of operation buttons
6
Electrical data
Power supply
9V block battery
Average power consumption transmit
approx. 70 mA
Standby
approx. 2 μA
Data transmission
Infrared type
IRDA standard
Transmission rate
fast IR: 62500 bit/s
slow IR: 9600 bit/s
Range
at least 6 m
Angle of reflected beam
20
Ambient conditions
Operating temperature
+ 10 °C to + 50 °C
Storage temperature
- 10 °C to + 50 °C
Relative humidity
< 80% non-condensing
tropicalized
-
