Loc8tor Lite User manual

User Guide
Manual del Usuario, Mode d’Emploi
Bedienungsanleitung
English 2
Español 15
Français 30
Deutsch 44
Pack Contents:
1x Loc8tor Lite, 2x Mini Homing Tags
1x Mounting Bracket, Tag ID Sticker
Key Ring Loop, Adhesive Strips
Page

INTRODUCTION
Thank you for purchasing a Loc8tor Lite, the great new
product that guides you to your mislaid valuables even in
those hard to nd places.
The Loc8tor Lite has been designed to be versatile
and easy to use, whether at home, out and about or in
business. Please take a few minutes to read through this
User Guide to help you get the most out of your Loc8tor.
Loc8tor has been manufactured to quality standards to
run trouble free and comes supplied with a manufacturers
two year warranty. For additional product information,
contact details and frequently asked questions please
visit our website at www.loc8tor.com.
We’d love to hear from you, what you like about Loc8tor
or any suggestions you have to improve it. E-mail
sales@loc8tor.com.
We hope you enjoy your new purchase and can now rest
at ease, avoiding those frustrating moments of mislaying
your important items.
www.loc8tor.co.uk www.loc8tor.com
Anthony Richards
Managing Director
2

3
CONTENTS
Button Guide 3
Getting Started 4
Switching ON / OFF 6
Volume 6
Locating – Find a mislaid item 7
Range Guidelines 9
Mounting Bracket 9
Batteries 10
Unregister / Deleting a Tag 11
Warranty 12
General Care 13
Please note 13
On / Off
(hold in
for two
seconds)
Volume
Register and
Locate up to
four Tags
Directional
lights Status Light
Button Guide
Page

4
GETTING STARTED
Your Loc8tor could not be easier to setup or use. Follow
these steps and you’ll be tracking down your tagged
valuables in no time at all.
1. ACTIVATE BATTERIES
Pull out the strip on the back of the Loc8tor to activate
battery.
It will beep and all the lights will ash – It is now ON. *
* After approx. 45 seconds left idle your Loc8tor will turn
itself off.
2. REGISTER A TAG
Pull out the strip on the Tag to activate batteries.• Tag beeps twice and the red light ashes twice .• Place Tag you wish to register next to Loc8tor making• sure all other Tags have been moved more than an
arms length away.
Make sure the Loc8tor Lite is switched on (red status• light will ash when ON).
Select one of the buttons on the front of the Loc8tor to• assign the Tag to. Hold the button down for 3 seconds.
The Loc8tor will beep.

5
3. ATTACH TAG
Adhesive strips: Best used when attaching to a clean,
dry, hard, at surface. Peel off backing to attach.
Sticky tabs are not permanent but increase their bond
with time. Ideally leave for a minimum of 10 minutes.
Strongest bond after 24 hours. To remove insert at tool
under Tag and gently twist to prise off.
Key ring loop: Use to attach Tag to items such as key
ring, bags, mobile phones etc. Push loop through the
Tag hole and then pull ring through the loop.
Release button – Loc8tor will beep to conrm start of • registration and status light will ash rapidly. Tag will
complete registration process.
Once registered Tag and Loc8tor will beep and ash • once.
Repeat process for up to 4 Tags, assigning each Tag
to a different button. Each of the four Tags when being
located will beep differently to help identication.

SWITCHING ON / OFF
ON
Hold in the right hand side button (see Button Guide)• for 2 seconds. The Loc8tor will bleep and all the lights
ash.
Small status light will ash whilst on. • The Loc8tor will automatically power down after 45• seconds if left idle.
OFF
Hold in the right hand side button for 2 seconds. Loc8tor • will beep and turn off.
VOLUME
Press in the left hand side button to select from three
volume settings; off, low and high. An audio beep will
sound when pressed indicating the current volume
level.
TIPS
Write on the sticky label provided which button is• allocated to each Tag / item.
If a locate button is pressed with no Tag assigned to it• an error tone will sound and the status lights will blink
rapidly. To register a Tag to this button, complete the
steps ‘REGISTER A TAG’.
6

LOCATING – FIND A MISLAID ITEM
LOST
Press and hold down the ON button until the Loc8tor• beeps and lights ash.
Press the button that your item / Tag is allocated to.• Loc8tor will beep and status light will ash rapidly as it’s • searching for the Tag.
When a Tag is detected the locating• lights will light up and the audio will
start.
With the Loc8tor in your hand turn• around slowly completing a full circle.
As you point in the right direction and• then move nearer to the item, the
audio pitch and frequency of beeps
will increase, and lights on the Loc8tor
change from red to amber to green.
Once a circle has been completed, face the direction of• the strongest audio and visual signal and walk in this
direction.
When you see three green lights the Tag is very close• by.
To guide you right in, the Loc8tor now changes to• ‘zooming in’ mode (pictured). As you get closer
amber then red lights illuminate and the audio pitch
increases.
FOUND
7
To stop a search press ON/OFF button or the locate
button your Tag is allocated to.

8
LOCATING TIPS
Place the Tag on a surface and practice locating a few• times to get a feel for how it works.
If you are ever unsure which direction to go in slowly• repeat full 360° circle and then go in the direction with
the strongest signal strength.
Strongest signal is displayed when the Loc8tor is• pointing directly at Tag. Try moving Loc8tor up and
down as the Tag could be upstairs or downstairs.
If you are close to a wall whilst getting a strong signal• check the room next door.
Try pressing the volume button on the Loc8tor when• you are close in order to mute and listen out for Tag
beeps.
If no signal is displayed try moving position to a different• area and repeat process.

9
RANGE GUIDELINES
Range will vary greatly depending on where the Tag
is used and what it’s attached to. If higher up and with
a clear line of sight, items can be found in excess of
122m/400feet. The chart gives a guideline. Actual range
may differ signicantly as performance is affected by
type of application and environment it’s used in.
Tortoise
30m / 100ft
Cat or Dog
30 - 100m / 100 - 300ft
Parked Car
30 – 140m / 100 – 500ft
ESTIMATED RANGE CHART
Model Aircraft up a tree
180m / 600ft
MOUNTING BRACKET
Keep the Loc8tor in the mounting bracket when not
in use. Attach bracket to the fridge or any other metal
surface using the sticky backed magnet or attach it to a
door/wall using the raw plug and screw provided.
Place the sticker on the inside of the mounting bracket as
a quick reminder what you have tagged.

BATTERIES
Loc8tor Handheld: If the Loc8tor does not power up or
lights are faint replace the battery using 1 x CR2032 or
equivalent placing in the battery compartment + side up.
Battery compartment can be found on the back at the
bottom. Slide down to open.
To change the batteries in a Tag: Put your thumbnail or
a at tool at the end of the Tag, by the lanyard hole, into
the split line (line going around the middle of the Tag).
Keeping your thumbnail / at tool in the split line move it
around to the middle of the long side. The Tag will pop
open.
Replace with SR54 (silver oxide) 1.5v button cells or • equivalent to provide best battery life, keeping the plus
side face up nearest the lanyard
hole.
Replace the lid by putting one side• in rst then pushing shut.
If batteries are correctly• inserted the Tag will beep
when case is closed.
To test batteries open
then shut lid by following
the above steps.
If the Tag does not beep and ash
replace batteries.
10

11
UNREGISTER A TAG
Once a Tag has been registered only that button can be
used to locate it. To move the Tag to another Loc8tor you
will rst need to unregister it.
To Unregister:
Place the Tag to be unregistered next to the Loc8tor.• Hold down the volume button and at the• same time press the button that the Tag
is registered to for 3 seconds.
Loc8tor will beep once – let go of the buttons.• Loc8tor will now beep twice, the status light will ash • rapidly and start to unregister Tag.
To conrm successful unregistration Tag and Loc8tor • will beep twice.
DELETE A TAG
If a Tag has been damaged the Tag can be deleted
enabling another Tag to be registered to that button.
To Delete :
Hold down the volume button and at the same time• press the button that the Tag is registered to for 7
seconds or until the Loc8tor beeps twice – then let go
of the buttons.
The Loc8tor will beep three times and start to unregister• the Tag.
To conrm successful deletion, Tag and Loc8tor will • beep and LED will ash.

TERMS & CONDITIONS
Please contact place of purchase or Loc8tor website
www.Loc8tor.com for full Terms and Conditions.
WARRANTY
Loc8tor Ltd warrants to the original purchaser that this
product shall be free from signicant defects in material
and workmanship for two years beginning on the date of
purchase as shown on your receipt.
Should the product need to be returned it must be sent
back to the original place of purchase to be processed.
Proof of purchase must accompany the returned
product. If purchased direct from Loc8tor Ltd. a returns
authorisation number is required prior to the product
being returned. Product must be returned by signed
delivery in suitable protective packaging.
This warranty does not apply to any product that has
been subject to abuse, misuse, negligence, tampering or
has been modied in any way.
Without prejudice to your rights Loc8tor Ltd. may replace
a defective product or issue a credit against future
purchases.
No other warranties, express or implied are made.
Loc8tor Ltd. shall not be liable for any special, incidental
or consequential damages whether or not the purpose
for which you purchased the product was made known
to Loc8tor Ltd, the retailer or otherwise. Your statutory
rights are not affected in any way.

13
GENERAL CARE
• The Loc8tor and Tags have not been designed to be
waterproof. Please take care not to get wet. (Look out
for our splash proof Tag casing).
• Never clean with water, detergent or cleaning agent
use a clean, dry cloth.
• Tag and Handheld Loc8tor operational temperature
is between 0˚C to + 55˚C. Storage temperature is
between - 10˚C and + 60˚C.
PLEASE NOTE
122 metre / 400 feet range is based on clear line1. of sight. Actual range will vary depending on use,
environment and location.
Loc8tor is not a toy and should only be used by adults2. or with parental supervision.
Locate mode has been designed to help nd your 3. possessions. It should not be relied on to nd people.
The Loc8tor is intended to be used in accordance with4. these instructions.
BEWARE OF CHOKING HAZARD – KEEP5. LOOSE TAGS OUT OF THE REACH OF YOUNG
CHILDREN.

14
FCC STATEMENT
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.•
Increase the separation between the equipment and receiver.•
Consult the dealer or an experienced radio/TV technician for help.•
CAUTION - Changes or modications not expressly approved by
Loc8tor Ltd can void the users authority to operate the Loc8tor.
CHANGES
The material in this User Guide is for information
only and is subject to change without notice. Whilst
reasonable efforts have been made in the preparation
of these instructions to ensure its accuracy, Loc8tor Ltd.
assumes no liability resulting from errors or omissions
in this User Guide, or from the use of the information
contained herein. Loc8tor Ltd. reserves the right to make
changes to the product design without reservation and
without notication to its users.

15
INTRODUCCIÓN
Gracias por adquirir su Loc8tor Lite, un novedoso
producto que le guiará hasta sus objetos perdidos.
El Loc8tor Lite se ha diseñado de modo que resulte
versátil y fácil de usar, ya sea en casa, en el trabajo
o en exteriores. Lea detenidamente este manual
de instrucciones para sacar el máximo partido a su
Loc8tor.
El Loc8tor se ha fabricado con materiales de primera
calidad para evitar cualquier problema y, además,
dispone de una garantía de 24 meses. Visite nuestro sitio
Web (www.loc8tor.es) si desea obtener más información,
necesita nuestros datos de contacto o quiere consultar
las preguntas más frecuentes sobre el producto.
Nos gustaría conocer su opinión sobre Loc8tor (lo que
más le gusta, lo que podríamos hacer para mejorarlo,
etc.) y que nos explicara alguna historia divertida sobre
cómo le ha ayudado. Envíenos un mensaje de correo
electrónico a sales@loc8tor.com con sus comentarios y
sugerencias.
Esperamos que disfrute de su nueva adquisición y que
pueda descansar tranquilo sabiendo que ya no volverá a
sentir la frustración de perder sus objetos de valor.
Anthony Richards
Director Ejecutivo www.Loc8tor.es

16
ÍNDICE
Botones 16
Para Empezar 17
Encendido y Apagado 19
Volumen 20
Localización – Búsqueda de un objeto perdido 21
Alcance 22
Soporte 23
Anular Registro y Borrar Etiquetas 24
Pilas 25
Mantenimiento General 26
Nota 27
Garantía 28
BOTONE
Luz de
Estado
Registrar
y Localizar
hasta cuatro
Etiquetas
Volumen Botón de
Encendido/
Apagado
(mantener
durante 2
segundos)
Luces de
Dirección
Página

17
PARA EMPEZAR
Congurar y usar el Loc8tor es muy fácil. Siga los pasos
siguientes y muy pronto podrá empezar a buscar sus
objetos de valor Etiquetados.
1. ACTIVACIÓN DE LA PILA
Retire la cinta de la parte posterior del Loc8tor para activar
la pila. El dispositivo emitirá un pitido y todas las luces
parpadearán, lo cual indicará que está encendido*.
* El Loc8tor Lite se apagará solo automáticamente tras
45 segundos de inactividad.
2. REGISTRO DE LAS ETIQUETAS
• Retire la cinta de la Etiqueta para activar la pila.
• La Etiqueta emitirá dos pitidos y la luz roja parpadeará
dos veces.
• Sitúe la Etiqueta que quiere registrar junto al Loc8tor y
aleje el resto de Etiquetas por lo menos un metro.
• Asegúrese de que el Loc8tor Lite está encendido (la luz
de estado roja parpadea)
• Seleccione uno de los botones de la parte frontal del

18
3. COLOCACIÓN DE LAS ETIQUETAS
En función de su uso, las Etiquetas pueden colocarse
con tiras adhesivas o con anillas o dejarse sueltas.
Tiras Adhesivas
Ideales cuando se pretende colocar una Etiqueta en una
supercie llana, dura, seca y limpia. Retire la película
protectora antes de colocarlas.
Las Etiquetas adhesivas no son permanentes, pero
aumentan su adherencia con el tiempo. Lo ideal es
colocarlas y dejarlas reposar durante 10 minutos. Al
cabo de 24 horas, la adherencia es muy alta.
Para retirar una Etiqueta adhesiva de un objeto, inserte
una herramienta plana debajo de la misma y haga
palanca con cuidado.
Loc8tor al que desee asignar la Etiqueta. Mantenga
presionado el botón seleccionado durante 3 segundos.
El Loc8tor emitirá un pitido.
• Suelte el botón. El Loc8tor emitirá un nuevo pitido
para conrmar el inicio del registro y la luz de estado
parpadeará rápidamente. La Etiqueta completará el
proceso de registro.
• Una vez completado, la Etiqueta y el Loc8tor emitirán
un pitido y parpadearán una vez.
Repita el proceso para un máximo de hasta 4 Etiquetas,
asignando un botón diferente a cada una de ellas.
Cada Etiqueta emite un pitido diferente, lo cual ayuda
a identicarlas.
(REGISTRO DE LAS ETIQUETAS)

19
ENCENDIDO Y APAGADO
Encendido
Mantenga presionado el botón de alimentación • durante 2 segundos. El Loc8tor emitirá un pitido y
todas las luces parpadearán.
La luz de estado pequeña parpadeará mientras esté• encendido.
El Loc8tor se apagará automáticamente tras 45• segundos de inactividad.
Apagado
• Mantenga presionado el botón derecho durante 2
segundos. El Loc8tor emitirá un pitido y se apagará.
Anillas
Ideal para colocar Etiquetas en objetos como llaveros,
maletas, etc. Pase el cordel por el agujero de la Etiqueta
y, a continuación, pase la anilla a través del lazo del
cordel.

20
CONSEJO
• Escriba en las Etiquetas adhesivas suministradas qué
botón se corresponde con cada etiqueta/objeto.
• Si pulsa un botón de localización que no tiene una
Etiqueta asignada, el Loc8tor emitirá un tono de error y
la luz de estado parpadeará rápidamente. Para asignar
una Etiqueta a dicho botón, siga los pasos anteriores.
VOLUMEN
Pulse el botón izquierdo para seleccionar una de las tres
modalidades de volumen: apagado, bajo y alto. Cada
vez que pulse el botón, se emitirá un pitido que indica el
nivel de volumen actual.
Table of contents
Languages:
Popular Remote Control manuals by other brands

Sony
Sony Remote Commander RM-V18A operating instructions

Philips
Philips SRU3040 Specificaties

Flying Industry Development
Flying Industry Development 0020703 quick guide

Bang & Olufsen
Bang & Olufsen Beolink 1000 Service manual

Philips
Philips Prestigo SRU8015/10 quick start guide

Celestron
Celestron Nex-GO DX KIT manual