AERMEC WLRC30 User manual

USER MANUALUSER MANUAL
REMOTE CONTROLLER
WLRC30
18.10 - 5385731_00

REMOTE CONTROL...................................................................................................................4
FUNCTIONS AVAILABLE THROUGH THE REMOTE CONTROL..................................6
SWITCHING THE UNIT ON OR OFF.....................................................................................6
SELECTING AN OPERATING MODE....................................................................................7
SETTING THE OPERATING SETPOINT................................................................................8
SETTING THE FAN SPEED.......................................................................................................8
SETTING THE VERTICAL MOTORISED DISCHARGE FIN SWING ...........................9
SETTING THE HORIZONTAL MOTORISED DISCHARGE FIN SWING....................9
SETTING A SYSTEM TIME.................................................................................................... 10
SETTING OR CANCELLING A PROGRAMMED SWITCH ON TIMER ON........... 10
SETTING OR CANCELLING A PROGRAMMED SWITCH OFF TIMER OFF........ 11
ACTIVATING / DEACTIVATING THE EXTENDED VENTILATION............................. 11
VIEW THE AMBIENT AIR, SET POINT OR OUTDOOR AIR
IN THE DISPLAY OF THE INDOOR UNIT...................................................................... 12
ACTIVATING / DEACTIVATING THE TURBO FUNCTION........................................... 12
ACTIVATING / DEACTIVATING THE NIGHTTIME COMFORT FUNCTION.......... 13
ACTIVATING / DEACTIVATING THE INDOOR UNIT’S DISPLAY.............................. 13
ACTIVATE / DEACTIVATE ENERGY SAVING .................................................................. 14
ACTIVATING/DEACTIVATING THE ANTIFREEZE FUNCTION ................................ 14
ACTIVATING/DEACTIVATING THE IFEEL FUNCTION ................................................ 15
ACTIVATING/DEACTIVATING THE KEYBOARD LOCK ............................................... 15
SETTING THE UNIT OF MEASUREMENT........................................................................ 16
SETTING THE FUNCTION HEALTH/AIR.......................................................................... 16
REPLACING THE REMOTE CONTROL’S BATTERIES.................................................... 17
INDEX

All specifications are subject to change without prior notice. Although every effort has been made to
ensure accuracy, Aermec shall not be held liable for any errors or omissions.
Dear customer,
Thank you for choosing an AERMEC product. It is the fruit of many years of experience and special
design studies and has been made of the highest grade materials and with cutting edge technology.
In addition, all our products bear the EC mark indicating that they meet the requirements of the
European Machine Directive regarding safety. The quality level is being constantly monitored, so
AERMEC products are synonymous with Safety, Quality and Reliability.
The data may undergo modifications considered necessary for the improvement of the
product, at any time and without the obligation for any notice thereof.
Thank you once again.
AERMEC S.p.A
This marking indicates that this product should not be disposed with other household
wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled disposal
of Waste Electrical and Electronic Equipment (WEEE), please return the device using
appropriate collection systems, or contact the retailer where the product was purchased.
Please contact your local authority for further details.
Illegal dumping of the product by the user entails the application of administrative
sanctions provided by law
INFORMATION FOR USER
This device is universal.
By pressing a key for a function that is not available, the unit will not change the operating status.
Never install the device in a damp area and do not expose it to direct sunlight.
Do not bump, throw or disassemble the device frequently.
Never use the device with wet hands.
Carefully read the manual before using and installing the device.

F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
2
1
5
3
8
4
7
16
13
11
9
14
12
15 17
6
10
4
1. REMOTE CONTROL
• Some of the buttons of the remote control are
not used for the required air conditioner and are
therefore not described in these instructions.
Pressing of these keys will not affect the operation of
the air conditioner.
• Check there are no obstructions between the
receiver and the remote control.
• The maximum distance between the IR receiver and
the remote control is 8 metres, to ensure the signal is
correctly received.
• Position the remote control at least 1 metre away
from TVs, radios, stereos, etc. There may be some
audio and video interference.
• Do not drop or throw the remote control.
• Do not let liquids enter the remote control, and do
not leave it in direct sunlight or in hot places.
• When the remote control sends a signal the symbol
appears on the display, the receiver of the indoor
unit emits a sound to confirm reception of the signal.
INDEX FUNCTION OF THE BUTTON:
1Switches the unit ON or OFF
2Increases value of the active function
3Decreases value of the active function
4Activates or deactivates the maximum fan
speed (TURBO)
5Sets the fan speed
6Operating mode selection
7Set the function discharge grille with
verrtical adjustment (swing function)
8Set the function discharge grille with
horizontal adjustment (swing function)
9Activates or deactivates the IFEEL function
10 Activates, deactivates or changes the
programmed switch ON timer
11 Activates, deactivates or changes the
programmed switch OFF timer
12 Activates or deactivates the HEALTH or the
AIR function
13 It displays in the indoor unit’s monitor
the set temperature and the room air
temperature
14 Sets the time on the system clock
15 Activates or deactivates the display of
information of the indoor unit
16 Activates or deactivates the Wi-Fi function
17
Activates or deactivates the SLEEP function
(this function is applicable to the cooling
and heating modes). Once activated this
function will control the unit in order
to maintain an ideal temperature (this
temperature is automatically calculated and
cannot be set)

5
REMOTE CONTROL DISPLAY ICONS AVAILABLE
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
1
2
3
4
5
6 7
9
8
10
11
12
13 14 15 16
17
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
18 19 20 21 22
23 24 25
INDEX FUNCTIONS REPRESENTED BY THE ICONS
1Indicates the AUTOMATIC mode is active
2Indicates the COOLING mode is active
3Indicates the DEHUMIDIFICATION mode is
active
4Indicates the VENTILATION mode is active
5Indicates the HEATING mode is active
6Indicates the actual fan speed
7Indicates the setting has been transmitted
to the receiver located on the indoor unit
8Indicates the Wi-Fi function is active
9Indicates which temperature is shown on
the internal display (indoor, outdoor or set
temperature)
10 Indicates that the anti-freeze function is
activated
11 Indicates the unit of measurement for the
temperature setpoints ( °C or °F)
12 Indicates that the figures displayed next to
the icon represent the current system time
13 Indicates if a timer is set for starting
14 Indicates if a timer is set for switching Off
15 Indicates the state of the vertical SWING
function
16 Indicates the state of the horizontal SWING
function
17 Indicates the operating setpoint
temperature in the various modes
18 Indicates the HEALTH mode is active
19 Indicates the AIR mode is active
20 Indicates the extended ventilation
function is active (only in cooling or
dehumidification mode)
21 Indicates the iFEEL mode is active
22 Indicates that all the buttons of the remote
control are locked
23 Indicates that the low noise QUIET function
is active
24 Indicates the TURBO function is active (the
fan speed is forced by this function)
25 6 Indicates the SLEEP function is active

6
2. FUNCTIONS AVAILABLE THROUGH THE
REMOTE CONTROL
SWITCHING THE UNIT ON OR OFF
By pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button it is possible to
switch the unit on or off. When off some information
is still displayed on the remote control: the operating
set point of the last operating mode used, and switch
on timers programmed (ON) and any icons tied to the
function active during the last switch on of the unit
(enabling the display of the indoor unit, etc.) Once
switched on the unit uses the settings selected during
the last operating session. Switching on
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP

7
The various operating modes have different features
and ranges:
• AUTOMATIC mode: in this mode no set point value
is displayed on the remote control and the fan speed
setting is AUTO (as default).
• COOLING mode: in this mode the user must set
the operating setpoint and a fan speed. If the room
air temperature is higher than the setpoint the unit
is switched on until the room temperature drops
below the setpoint value.
• DEHUMIDIFICATION mode: in this mode the user
must set the operating setpoint but not the fan
speed (which remains fixed at minimum). If the room
air temperature is higher than the setpoint the unit
is switched on until the room temperature drops
below the setpoint value.
• VENTILATION mode: in this mode the user must set
only the fan speed. This mode provides no heating
or cooling but only uses the internal fan to ventilate
the space.
• HEATING mode: in this mode the user must set the
operating setpoint and a fan speed. If the room air
temperature is lower than the setpoint the unit is
switched on until the room temperature rises above
the setpoint value.
SELECTING AN OPERATING MODE
If the unit is on, pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button allows passing
from one operating mode to the next, in this sequence:
Operating mode
selection
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Automatic
Cooling
Dehumidification
Ventilation
Heating
MODEON/OFF
FAN
CLOCK
X-FAN
TURBO SLEEP LIGHT
TEMP TIMER OFF
TIMER ON

8
SETTING THE OPERATING SETPOINT
All the operating modes (except the automatic one)
require an room air temperature value to control to:
this is called the operating setpoint.
If the unit is on (and the automatic mode is not
selected), pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
buttons
allows decreasing or increasing the operating setpoint.
The setpoint value is displayed in the central part of the
remote control’s display.
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Operating setpoint
SETTING THE FAN SPEED
If the unit is on (and the automatic or dehumidification
modes are not selected), pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button allows
the selection of the fan speed. Pressing the button
allows changing the fan speeds as shown in the icons
below, in the following sequence:
AUTO MINIMUM AVERAGE MAXIMUM
NOTE:
Besides the three speeds (AUTO automatically
selects the best speed based on the room
temperature), there is a function called TURBO
(explained earlier) which adds a further speed
above the maximum speed.
Setting the fan speed
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP

9
SETTING THE VERTICAL MOTORISED DISCHARGE FIN
SWING
If the unit is on, while pressing the button
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
it
activates the swing of the motorized supply air fin. The
fin allows to change the air flow in the room depending
on the set position; the logic where this function is
managed:
When the unit is on, while pressing the button it’s
possible to set one by one the following steps:
ATTENTION:
(*) are present in spite of different icons for
continuous oscillation, all 4 trigger the same
mode: fluctuation continues from the lowest
point to the highest point.
, , =
SETTING THE HORIZONTAL MOTORISED DISCHARGE
FIN SWING
If the unit is on, while pressing the button
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
it
activates the swing of the motorized supply air fin. The
fin allows to change the air flow in the room depending
on the set position; the logic where this function is
managed:
When the unit is on, while pressing the button it’s
possible to set one by one the following steps:
Fluctuation
continues
Fixed
(Step 1)
Fixed
(Step 2)
Fixed
(Step 3)
Fixed
(Step 4)
Fixed
(Step 5)
Fixed
(Step 6)
Fixed
(Step 7)
Motorised discharge
fin setting
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Motorised discharge
fin setting
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Fluctuation
continues(*) Fixed
(Step 1)
Fixed
(Step 2)
Fixed
(Step 3)
Fixed
(Step 4)
Fixed
(Step 5)
Fluctuation
continues (*) Fluctuation
continues (*)
Fluctuation
continues (*)

10
Setting a system time
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
SETTING A SYSTEM TIME
These remote controller equipped with an internal
clock which can display the current time; by pressing
on the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key the clock icon will start to flash (this
flashing will last 5 seconds, after this if no key is pressed
you automatically exit the time modification mode);
while the clock icon is flashing it is possible to change
the system time using the keys
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
to increase or decrease the displayed time; once the
desired value is set you need to wait 5 seconds or
press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key again to confirm the value (once
confirmed the clock icon will stop flashing).
SETTING OR CANCELLING A PROGRAMMED SWITCH
ON TIMER ON
The units possess a timer used to program switching
on by specifying the time that you want the unit
to start. By pressing the key
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
, on the left side.
(Attention: this button has two different functions that
are activated by pressing the left and the right side),
you enter the time programming mode (in this mode
the ”ON”icon to the right of the time flashes) and by
pressing the keys
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
it is possible to
set the switch on time.
Pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button again on the left side,
confirms the time and activates the timer programme.
If you want to cancel a programmed switch on, just
press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
, always on the left side key to cancel
the previous programming.
NOTE:
Once a programmed switch on is set, the operating
mode, the working setpoint and fan speed, will be
the same as those present when the unit stops.
Setting a programmed
switch on
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP

11
NOTE:
If the unit is off, the icon related to this function
is still visible (if the function has been activated);
remember that if the function is active and the unit
is off, a further press of the“FAN” key will disable
the function, but to be activated again the unit must
be switched on.
SETTING OR CANCELLING A PROGRAMMED SWITCH
OFF TIMER OFF
The units possess a timer used to program switching
OFF by specifying the time that you want the unit to
deactivate. By pressing the key
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
, on the right side.
(Attention: this button has two different functions that
are activated by pressing the left and the right side)
you enter the time programming mode (in this mode
the ”OFF”icon to the right of the time flashes) and by
pressing the keys
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
it is possible to
set the switch off time.
Pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button again on the right side,
confirms the time and activates the timer programme.
If you want to cancel a programmed switch off, just
press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
, always on the left side key to cancel
the previous programming.
ACTIVATING / DEACTIVATING THE EXTENDED
VENTILATION
During the operation in cooling or dehumidification
mode the condensate caused by the humidity in the
air is formed on the heat exchanger within the unit.
This function allows the ventilation to be extended
for two minutes after the unit is switched off,
thereby drying the heat exchanger.
If the unit is on (and the cooling or dehumidification
mode is selected), pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
for at least 2
seconds, allows activating or deactivating of this
function. On the remote control the display the
icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
will appear or disappear to indicate if the
function is activated or deactivated.
Setting a programmed switch
off
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the extended
ventilation function
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
ATTENTION:
The units can simultaneously manage an
ignition timer and one-off, so as to provide a
time slot within which allow operation of the
unit

12
VIEW THE AMBIENT AIR, SET POINT OR OUTDOOR AIR
IN THE DISPLAY OF THE INDOOR UNIT
Through the use of the remote control it is possible to
display the room temperature value read by the indoor
unit, or display the current operating setpoint used
by the unit. This information is displayed on board the
indoor unit’s display.
If the unit is on and if the indoor unit display is enabled,
pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
key allows the display of the following
values on the indoor unit’s display (successive pressing
passes from one to the next):
ACTIVATING / DEACTIVATING THE TURBO FUNCTION
The unit allows the setting of three fan speeds during
the various operating modes (except the automatic
mode and the dehumidification mode). There is an
additional speed called turbo.
If the unit is on, pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button activates
or deactivates this function. If the function is active the
icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
is shown on the remote control’s display.
NOTE:
The default display on the indoor unit’s display
is the operating setpoint; the room temperature
value is displayed for 3 seconds after which
the display returns to the operating setpoint.
To display the room temperature again it is
necessary to select the corresponding symbol on
the remote control.
Display of room temperature
or operating setpoint of the
indoor unit
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the
TURBO function
None
visualisation
Set
point
Ambient
air
Outdoor
air

13
NOTE:
The night time health function is deactivated by
switching off the unit, and on restarting will not be
active; this function can be activated at any time.
ACTIVATING / DEACTIVATING THE NIGHTTIME
COMFORT FUNCTION
The night-time comfort function controls the air
conditioner in an optimal way during the night. The
following logic is applied:
• In cooling or dehumidification: the temperature
setpoint is gradually increased to guarantee
maximum comfort combined with energy saving.
• In heating: the temperature setpoint is gradually
decreased to guarantee maximum comfort
combined with energy saving.
If the unit is on (except in automatic or ventilation
mode), pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
activates or deactivates the
night time health function. If the function is active the
icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
is displayed on the remote control.
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting night-time
comfort function
ACTIVATING / DEACTIVATING THE INDOOR UNIT’S
DISPLAY
The display on the indoor unit must be activated
using the remote control; To activate the display
on the front panel of the indoor unit press the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
button on the remote control.
Pressing the button again deactivates the display.
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Activating the display on
board of the indoor unit

14
ACTIVATE / DEACTIVATE ENERGY SAVING
The energy saving function can only be activated
during cooling mode; this function allows to reach the
set temperature with the lowest energy consumption.
If the unit is switched on and the cooling mode is
selected, pressing the plus keys
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
+
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
activate or
deactivate the energy saving function.
If the function is active on the remote control display
the icon will be displayed
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
ACTIVATING/DEACTIVATING THE ANTIFREEZE
FUNCTION
The anti-freeze function can only be activated during
the heating mode; this function allows to maintain
the work set to 8°C, to ensure that the ambient
temperature does not fall below this threshold.
If the unit is ON and the heat mode is active, press
”
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
” and “
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
” simultaneously to active or
deactivate the anti-freeze function.
If the function is active the icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
is shown on the
remote control’s display.
NOTE:
The energy saving and night-time functions
can not be activated at the same time; if the
night-time wellness function is active and you
want to activate the energy-saving function, the
night-time wellness function will be disabled
automatically.
NOTE:
The anti-freeze and night-time functions can not
be activated at the same time; if the night-time
wellness function is active and you want to
activate the anti-freeze function, the night-time
wellness function will be disabled automatically.
Setting the
energy saving
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the
Anti-Freeze function
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP

15
ACTIVATING/DEACTIVATING THE IFEEL FUNCTION
The user can precisely control the climate around him
keeping the remote control close.
Pressing the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
for active the IFEEL function is
active.
If the function is active the icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
is shown
on the remote control’s display.
The probe inside the
remote control detects room temperature and sends it
to the indoor unit. The remote control must always be
within its transmission range and facing the indoor unit
of the air conditioner. Do not put it in a drawer or cover
it. The remote control will update the reading and send
it to the air conditioner every 10 minutes and after any
key for setting variation is pressed.
ACTIVATING/DEACTIVATING THE KEYBOARD LOCK
For activating or deactivating the KEYBOARD LOCK
on the remote control press simultaneously the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
keys.
If the function is active the icon
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
is shown on the
remote control’s display.
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the
Anti-Freeze function
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the
keyboard lock function

16
SETTING THE UNIT OF MEASUREMENT
Under OFF status, press
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
and
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
X-FAN
SLEEP
simultaneously to change the temperature unit of
measurement from °C to °F.
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
Setting the unit of
measurement
SETTING THE FUNCTION HEALTH/AIR
Press the button
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
to access the HEALTH / AIR
function. The Health function is available when the
unit is equipped with an anion generator. When
the Health function is active, the anion generator
starts up by absorbing the powders and eliminating
the bacteria in the room. With the AIR function,
when the indoor unit is connected to the fresh air
valve, the Air function setting is able to control the
connection of the fresh air valve which, in turn,
controls the volume of fresh air and improves the
environmental quality inside the room. Press it once
to activate the Air function (the display will show
the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
icon). Press it a second time to activate the
HEALTH function and the AIR function at the same
time (the display will show the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
icons).
Press it a third time to deactivate both functions.
fourth time to activate the HEALTH function (the
display will show the
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP
icon).
Setting the
Health/Air
F
A
N
T
U
R
B
O
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT
WiFi
SLEEP

17
REPLACING THE REMOTE CONTROL’S BATTERIES
To replace the batteries of the infra red remote control
proceed as follows:
1. Open the battery cover by sliding it in the direction
of the arrow.
2. Remove the old batteries.
3. Insert two new 1.5V alkaline high performance
batteries, type LR03 (AAA), taking care not to reverse
the polarity.
4. Close the battery cover.
• NOTE:
• When batteries are replaced use new batteries of
the recommended type.
• Remove the batteries if the remote control is not
used for extended periods.
• The remote control can emit a signal up to a
maximum distance of 8 metres.
• The unit can be affected by signals transmitted
by remote controls for televisions, video
recorders, or other devices used in the same
room.

18

19

AERMEC S.p.A.
Via Roma, 996
37040 Bevilacqua (VR) - Italia
Tel. + 39 0442 633111
Fax [phone]
[email protected]
www.aermec.com
Aermec reserves the right to make all modification deemed necessary for improving the product at any time with any modification of technical data.
SCARICA
L’ULTIMA VERSIONE:
DOWNLOAD
THE LATEST VERSION:
TÉLÉCHARGER
LA DERNIÈRE VERSION:
http://www.aermec.com/qrcode.
asp?q=14106
http://www.aermec.com/qrcode.
asp?q=14107
http://www.aermec.com/qrcode.
asp?q=14108
BITTE LADEN SIE DIE LETZTE
VERSION HERUNTER:
DESCARGUE
LA ÚLTIMA VERSIÓN:
http://www.aermec.com/qrcode.
asp?q=14109
http://www.aermec.com/qrcode.
asp?q=14110