Loewe ONE 55 User manual

TV
One
One 55
User manual
36598021

One 55
User manual
2
Imprint
Loewe Technologies GmbH
Industriestraße 11
D-96317 Kronach
www.loewe.tv
Editorial date 11/16-3.0 TB/PS
© Loewe Technologies GmbH, Kronach
ID: 3.0.30.0
All rights including translation, technical modifications and errors
reserved.
n
Imprint

One 55
User manual
3

Table of contents
Imprint...........................................................................................2
Welcome........................................................................................5
Scope of delivery .......................................................................................... 5
About this user manual ............................................................................... 5
For your safety..............................................................................6
Remote control button mapping................................................8
Operating controls on the TV set...............................................9
Connections rear side of the device ........................................10
Mounting on the table stand .....................................................11
Mounting on the table stand...................................................................... 11
Cable fixing ................................................................................................... 11
Preparing the TV set .................................................................. 12
Installing the TV set.....................................................................................12
Connecting the TV set................................................................................12
Preparing the remote control unit.............................................................13
Switching the TV set ON/OFF ...................................................................14
General information on menu operation................................. 15
On-screen displays..................................................................... 18
Explanation of keys......................................................................................18
Explanation of symbols ..............................................................................18
Automatic menu info ..................................................................................18
Permanent clock display ............................................................................18
Operation without remote control ........................................... 18
Initial installation....................................................................... 19
Initial installation wizard..............................................................................19
TV set as a monitor ....................................................................................30
Home view................................................................................... 31
Home view - Favourites ..............................................................................31
Home view - Sources..................................................................................31
TV.................................................................................................32
Setting the volume .....................................................................................32
Select station ..............................................................................................32
Status display..............................................................................................34
Function list (TV mode) .............................................................................35
AV list (AV Source)......................................................................................35
Electronic Programme Guide – EPG........................................................36
Teletext.........................................................................................................39
HbbTV / MediaText.....................................................................................41
Picture in Picture (PIP)...............................................................................42
Digital Recorder ..........................................................................................43
TV viewing with time shift.......................................................................43
Archive recording.....................................................................................44
DR+ archive ..............................................................................................46
DR+Streaming ........................................................................................50
Follow-Me function ..................................................................................50
Timer.............................................................................................................51
Video............................................................................................55
Video playback............................................................................................56
Additional functions for DR+ archive playback......................................59
Audio/Radio .............................................................................. 62
Audio playback ...........................................................................................63
Radio mode (DVB radio) ...........................................................................65
Radio mode (Internet radio) .....................................................................66
Photo ...........................................................................................67
Photo display...............................................................................................68
Web ............................................................................................. 69
MediaNet .....................................................................................................69
Browser.........................................................................................................71
System settings .........................................................................72
Picture .......................................................................................................... 73
Sound........................................................................................................... 75
Stations........................................................................................................ 76
Automatic scan TV+Radio..................................................................... 77
Manual Scan TV / Radio.........................................................................78
Station lists TV / Radio ...........................................................................80
Compose / edit Personal list...................................................................81
Update station list automatically...........................................................82
Transfer all station lists............................................................................82
Control .........................................................................................................83
Language ..................................................................................................84
EPG............................................................................................................84
Parental lock .............................................................................................85
Energy efficiency......................................................................................86
Quick start mode.....................................................................................86
Software update....................................................................................... 87
On-screen displays..................................................................................92
Time and date ..........................................................................................92
DVB settings.............................................................................................93
PIP..............................................................................................................93
DR+...........................................................................................................94
Standard Teletext.....................................................................................95
HbbTV.......................................................................................................96
Hard disks.................................................................................................96
Export log file............................................................................................ 97
WEB key function.....................................................................................97
Multimedia / Network................................................................................98
Network settings......................................................................................98
Multimedia settings................................................................................101
Renderer ..................................................................................................101
Connections..............................................................................................102
Sound components ..............................................................................103
Antenna DVB..........................................................................................106
AV connection settings .........................................................................106
Digital Link............................................................................................... 107
Gaming mode ........................................................................................ 107
Extras .........................................................................................................108
Integrated features ................................................................................109
Reset to factory settings.......................................................................109
Conditional Access module (CA module)...........................................110

One 55
User manual
4

Table of contents
External devices ........................................................................112
Devices to the HDMI connections...........................................................112
Digital Link HD............................................................................................113
Devices on AV.............................................................................................114
Connecting the speaker system (AUDIO OUT)....................................116
Connecting the HiFi/AV amplifier............................................................116
Audio playback from external devices.................................................... 117
Setting the remote control .......................................................................118
Teaching the remote control .................................................. 119
Troubleshooting ........................................................................121
Technical Data .......................................................................... 123
Signals via AV (PC IN) / HDMI................................................................ 124
Signal input groups .................................................................................. 124
Accessories............................................................................... 125
Upgrade kits / conversion kits / cables ................................................ 125
Mounting options ..................................................................................... 126
VESA standard.......................................................................................... 127
Environment .............................................................................128
Legal information.....................................................................128
Miscellaneous...........................................................................129
CA module error codes ........................................................................... 129
Glossary ....................................................................................130
EC Declaration of Conformity.................................................133
Index ..........................................................................................134
Service.......................................................................................138
Code page .................................................................................139
Notes ......................................................................................... 141

One 55
User manual
5

Welcome
Thank you,
for choosing a Loewe product and having placed your trust in us.
With Loewe you have not simply decided on a modern and technically
innovative TV set, but for timeless design, sharp picture quality, brilliant
sound for movies and music as well as intuitive operation with the
Loewe remote control unit, smart phone or tablet. In short, Loewe is
perfect for home entertainment – Made in Germany.
We look forward to welcome you as our customer and hope that you
enjoy your Premium Home Entertainment made by Loewe.
Many features, one result:
perfect Home Entertainment.
Just more entertainment.
The Loewe Assist Media user interface is intuitive and
graphically optimised. This is how you quickly find your
desired content – from TV set to online.
In the user guide refer to Home view.
Perfectly networked.
Thanks to its numerous connections, your Loewe TV
becomes your entertainment centre. Connect it to the
Internet, DVD/Blu-ray player, external speakers, etc.
In the user guide refer to Media+
Hard disk for your TV archive.
Record the TV programme on an externally connected hard
disk or pause it and continue watching it at a later date.
With DR+ (Digital Recording), all this is no problem for your
Loewe TV set.
In the user guide refer to Digital Recorder.
Your contact person.
We are happy to help you with any questions regarding your
TV set and other Loewe products.
In the user guide refer to Service.
Customer
Care
Center
Scope of delivery
LCD TV set
Antenna cable
Remote control Assist with two batteries
Attache-câble à velcro
Installation instructions
Table Stand
Tool kit for mounting the set-up solution
About this user manual
For best results regarding safety and the longevity of the set, we
recommend you read the chapter For your safety before switching
the TV set on for the first time.
The chapter glossary gives explanations of certain terms used in the
TV set and the user manual.
Paragraphs which begin with the symbol indicate important
instructions, tips or conditions for the following settings.
Terms which you will find in the menus or printed on the remote control
or TV set are written in bold type.
The necessary control elements are shown in the descriptions to the
left of the text containing the instructions for action.
Depending on the connected accessory equipment the menus in the
TV set can differ from those described here.
All the station names, programme contents, the illustrated photos,
titles, albums and album covers in this user manual are examples.
In addition to the remote control, a PC keyboard can be connected to
one of the USB ports on your TV and then used to control your TV set.
In the user manual, this symbol indicates places in
whichthe useofa keyboard isparticularlyadvantageous.
The user manual for your TV set are updated at irregular intervals.
We recommend an occasional examination on the Support Portal of
the Loewe homepage.
General information on the operation of the
TV set
For further information on the user interface and the general operation
of your TV set see chapter General information on the operation.
Interactive data services
In some countries the stations also broadcast interactive data services
with their programmes, leading to the functions of individual keys not
being available or only so to a limited extent. You can find out more
about this in chapter TV, section HbbTV / MediaText.
Important information
Loewe does not accept any liability for the nature and content of
receivable Internet services. This also applies to the Loewe MediaNet
portal. With its devices, Loewe provides the technical platform that
fundamentally enables such material to be received. Loewe cannot
make any guarantees regarding changes in scope and content,
particularly with regard to the future and after going to press. The
receivable online services are not included in the delivery and can vary
depending on the product and country.

One 55
User manual
6
For your safety, and to avoid unnecessary damage to your unit,
please read and follow the safety instructions below:
Intended use and ambient conditions
This TV set is intended exclusively for receiving and playing visual and
audio signals. The TV set is designed for dry rooms (living rooms and
offices). It must not be operated in rooms with high humidity (for
example bathroom, sauna).
Please note that our TV sets are sensitive to dust and sooty particles
in the ambient air.
Excessive environmental pollutions of this kind can lead to damage of
the device up to a malfunction.
Pay attention to a clean ambient air, so that your device is not damaged.
Behind the panel plate of the LCD TV set, soot and dust deposits may
appear without a soot generating source being visibly present. Such
soot and dust deposits are also referred to as „fogging“ or „magic
dust“. This phenomenon occurs sporadically, but in particular during
the heating period and after renovations and in new buildings. As a
cause for this, various factors are mentioned, see also reports on the
Internet.
The cleaning or replacement of the panel is excluded from the warranty
claims in such cases, because it is not a defect of the device, but an
external influence.
If the unit is used outdoors, make sure that it is protected from moisture
(rain, dripping water and splashing water or dew). High humidity and
dust concentrations lead to leakage currents in the device. This can
result in a shock hazard when touching it or even fire.
If you have moved the unit out of
the cold into a warm environment,
leave it switched off for about an
hour to avoid the formation of con-
densation.
Do not place objects containing
liquids on top of the unit. Protect the
appliance against dripping and
splashing water.
Candles or naked flames must be
kept away from the TV set at all times
to prevent it from catching fire.
Never place the TV set in a location where it is exposed to vibrations. This
may lead to damage.
Transporting
Move the device in vertical position only. Get hold of the device on the
upper and lower edges of the housing.
Do not stand it up on the bottom edge, so as to reduce the risk of
damage and soiling. If the set has to be put down during packing/
unpacking, place the TV set with its entire front surface lying flat on
soft material. Use a blanket or the fleece from the packing material as
an underlay.
The LCD screen is made of glass or plastic and can break if not handled
properly.
Always wear rubber gloves to carry the TV set if the LCD screen is
damaged and liquid crystal might be leaking out. In the case of skin
contact immediately rinse thoroughly with water.
Power supply
Incorrect voltages can damage the unit. This device may only be
connected to a power supply with the voltage and frequency indicated
on the type plate and using the supplied mains cable. The mains plug of
the TV set must be easily accessible so that the device can be
disconnected from the mains at any time. When unplugging the unit from
the mains, pull at the connector body and not at the cable. The cables in
the mains plug could otherwise be damaged and could cause a short-
circuit when plugged in again.
Lay the mains cable so that it cannot be damaged. Do not step on the
mains cable. The mains cable may not be kinked or laid over sharp
edges nor be exposed to chemicals; the latter also applies to the unit
as a whole. A mains cable with damaged insulation can cause electric
shocks and poses a fire risk.
Air circulation and high temperatures
The vent slots on the rear panel of the set must always be kept
unobstructed. Please do not place newspapers or cloths on/over the
TV set.
Make sure that there is at
least 10 cm free space on the
sides and above the set for
air circulation, if the set is
placed in a cabinet or on a
shelf.
Like any electronic device,
your TV set requires air for
cooling. Obstruction of the air
circulation can cause fires.
Prevent metal items, nee-
dles, paper clips, liquids, wax, or similar items, from getting into the
interior of the device through the vent slots in the rear panel. Such
objects can cause short circuits in the set, which could possibly cause
a fire.
If something should get into the interior of the set then immediately
unplug the mains plug of the device and contact the field service for
more information.
About the LCD screen
The TV set with LCD screen you have purchased satisfies the most
rigorous quality requirements and has been inspected with respect
to pixel errors. Despite of thorough care when manufacturing the
display, it cannot be 100% guaranteed that no subpixel defects will
occur due to technical reasons. Please understand that these types
of effects, as long as they are within the limits specified in the standard,
cannot be considered as a device defect in terms of the guarantee.
Avoid displaying still images for long periods of time. It is possible that
a copy of the image may remain visible.
10 cm 10 cm 10 cm

For your safety

One 55
User manual
7

For your safety
Set-up
Loewe flatscreen TV sets are specified for Loewe accessories. The TV
set is suitable for mounting in many different ways. Note the assembly
instructions regarding the different possible mounting options.
When using accessories from other manufacturers take care that the
TV set can be easily inclined or rotated on the respective mounting
option.
For mounting options from other manufacturers with motor drive,
make sure that the TV set cannot be rotated manually. The use of
mounting options from other manufacturers with locks in certain
positions is generally discouraged.
When rotating the TV set it is essential to
ensure that the pressure exerted on the device
frame is not too large. Especially in case of
large-format displays there is a risk to damage
the screen.
Before setting up the device, please check that the final location is
suitable to bear the load of the device in terms of surface (sensitivity
to pressure) and stability (statics).
This is particularly the case for the high-gloss painted surfaces and
surfaces that are made from real wood / real wood veneer or plastic
surfaces.
Place the TV set with the table or floor stand only on a level, sturdy,
horizontal base. Particularly ensure that the set does not protrude to
the front when placed in or on pieces of furniture.
Place the TV set in a normal position for use. TV set may only be used
in an upright horizontal position. It may not be tilted by more than 10
degrees. The TV set must never be operated in portrait position, lying
flat or hanging overhead from the ceiling.
Set up the device where it is not exposed to direct insolation and where
it is not exposed to additional heating by radiators
.
When using the VESA mounting points, please refer to the information
in chapter Accessories, section VESA standard.
Supervision
Do not let children operate the TV set unsupervised and do not let
them loiter and play close to the set. The set could tip over, be pushed
off or pulled down from the stand surface and injure someone.
Do not allow the switched-on TV set to run unattended.
Volume
Loud music can lead to ear damage. Avoid extreme volume especially
over long periods and when using headphones.
Thunder storms
Pull out the mains plug and all connected antenna cables from the TV
set in a thunderstorm. Overvoltage caused by lightning strokes can
damage the set via the antenna system, as well as via the mains. The
mains plug and all connected antenna cables should also be pulled
out during long periods of absence.
±10°
D
Automatic shutdown
If the TV is not operated for 4 hours (adjustment of volume, programme
change, etc.) the TV will automatically switch to stand-by mode to save
energy. A prompt to terminate this shutdown process appears one
minute before expiry of the 4 hours.
The automatic shutdown is active in the energy efficiency mode
Home Mode.
Automatic shutdown does not occur when using the radio without
screen display (screen off).
Cleaning and care
Switch off the TV set with the main switch prior to cleaning.
Clean the TV set, the screen, and the remote control unit with a soft,
moist, clean and colour-neutral cloth only, without any aggressive or
scouring cleaning agents.
Repairs and accessories
Never remove the back of the TV set yourself. Have your TV set
repaired or serviced by authorised television technicians only.
Only use original accessories such as Loewe stands, if possible.

One 55
User manual
8

Remote control
(1
The assignment of these keys can be changed (see chapter External devices,section Setting the remote control).
(2
The assignment of these keys can be changed (see chapter System settings,section Control – Web key function).
(3
Depending on the corresponding settings (see chapter System settings,section Control – HbbTV).
(4
Only with externally connected USB hard disk.
Remote control button mapping
Depending on the selected operating mode (TV/Video/Audio/Photo/Web) and function (e.g. DR+, EPG, PIP, Teletext, HbbTV, etc.), the key assignment
may differ from the assignment described here (see the corresponding chapter in this user manual).
1
Sound mute/on.
2
LED display for currently operated device.
3
Call the TV mode.
4
Reassign remote control to SetTop-Box(1 (presetting: Apple TV).
5
Pressing briefly : Open the DR+ archive.
Pressing longer : Call timer list.
6
Add current object to Home favourites.
7
EPG (Electronic Programme Guide) on/off.
8
Teletext/MediaText(3 on/off.
9
Pressing briefly : Call function list for the active operating mode.
P
ressing longer : Call System settings.
10
V+/V- increase/reduce volume.
11
Pressing briefly : Call station list.
Pressing longer
: Call expanded station list.
In the menu: confirm/call up.
12
Green coloured key: screen on/off in Audio/Radio mode.
13
Red coloured key: call preferred value-added network service, if available (
3
.
14
Pressing briefly: skip backwards.
Pressing longer: winding backwards.
15
Pressing briefly: direct recording (with determination of recording duration) (4.
Pressing longer: One Touch Recording (4.
16
Pause / Start/pause the timeshift television(4.
17
Stop / End timeshift (return to live image)(4.
18
Pressing briefly: skip forwards.
Pressing longer: winding forwards.
19
Play / Start/continue timeshift television (4.
20
Blue coloured key: call station function list
(selection of language/sound, subtitles or channel/video track).
21
Pressing briefly: Yellow coloured key: call history.
Pressing longer: Yellow coloured key: call last station.
22
Navigation on the user interface, select objects.
In the menu / lists: select/set.
23
P+/P– next/previous station.
24
Pressing briefly: step / level back.
Pressing long: close all displays.
25
Press briefly during an on-screen display: info display. Info text appropriate to the content
that can assist you further, should you have any questions about your TV set.
Press briefly, without on-screen display: access status display. With status display open and
repeatedly pressing the key call the detailed information on the broadcast.
Press longer: show Explanation of keys.
26
PIP (picture in picture) on/off.
27
Call up the Home view.
28
Call up the AV list.
29
Select stations with numeric buttons directly.
In the menu: enter numbers or letters.
30
Call MediaNet (standard assignment)
(2.
31
Reassign remote control to video device(1 (presetting: BluTech Vision 3D).
32
Call radio mode (standard assignment) (1 .
33
Switches the TV set on (mains switch must be turned on) or switches to standby mode.
Press briefly while TV set is switched on: TV set and all CEC-enabled devices connected
to the HDMI ports will be switched off to standby (System Standby).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
32
18
19
20
21
22
23
24
25
26
27
28
29
30
31
33
17

One 55
User manual
9
1Mains switch:
The mains switch is located on the bottom of the set.
Always return the TV set to Standby mode before switching it off
with the main switch.
2 Display:
white: TV set in standby.
white, intermittent: TV set starts.
green: TV set switched on.
red: timer recording active.
blue:
TV set in standby and background operation
active (EPG data updating, software
update).
3 IR receiver:
Infrared receiver for receiving the remote control commands.
4 Key M:
TV set in standby mode: switch TV set on in TV mode.
TV set switched on: call direct control on TV set.
Direct control on TV set: up .
5 Key R:
TV set in standby mode: switch TV set on in radio mode.
TV set switched on: toggle TV mode and radio mode.
Direct control on TV set: down .
6 V +:
TV set in standby mode: switch TV set on in TV mode.
Increase volume.
Direct control on TV set: to the right .
7V – :
TV set in standby mode: switch TV set on in TV mode.
Reduce volume.
Direct control on TV set: to the left .
8 P +:
Programmme + (next station).
9 P – :
Programme – (previous station).
10 On/Off key:
Switching on from standby mode
Switching off to the standby mode

Operating controls on the TV set
Functions of the operating elements
M
R
V+
V-
P+
P-
2
1
4
5
6
7
8
9
10
3

One 55
User manual
10
1
Mains connection
Power plug – 220-240 V ~ 50 / 60 Hz
2
LAN - Network connection
RJ-45 – Ethernet / Fast Ethernet
3
HDMI 1 (ARC) - HDMI input 1 (with Audio Return Channel)
HDMI – Digital Video IN (4K@60Hz)/Audio IN/OUT
4
HDMI 2 - HDMI input 2
HDMI – Digital Video IN (4K@60Hz)/Audio IN
5
ANT TV - Antenna/cable analogue / DVB-T/T2 / DVB-C
IEC socket – 75 Ohm / 5 V / 80mA
6
ANT SAT 1 - Satellite antenna (Sat tuner 1) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA
7
ANT SAT 2 - Satellite antenna (Sat tuner 2) DVB-S/S2
F socket – 75 Ohm / 13/18 V / 500mA
8
SPDIF OUT - Audio output (digital)
Cinch socket (orange)
9
USB 3.0 - USB connection
USB type A – USB 3.0 (max. 1000mA)
10
HEADPHONE - Headphone connection
Jack 3,5 mm – Headphones 32–200 Ohm
11
HDMI 3 - HDMI input 3
HDMI – Digital Video IN (4K@60Hz)/Audio IN
12
AUDIO OUT - Audio output (analogue) L/R – (Jack 3,5 mm)
13
AV INPUT - Micro AV socket (1
Audio/Video IN with Scart adapter: Y/C (S-VHS/Hi 8)
CVBS (VHS/8 mm)
RGB
L/R
Audio/Video IN with VGA adapter:
PC/STB video signal
Component (YPbPr)
L/R
14
COMMON INTERFACE - CI slot 1 (standard V1.3)
15
COMMON INTERFACE - CI slot 2 (standard V1.3)
16
HDMI 4 (UHD) - HDMI input 4
HDMI – Digital Video IN (4K@60Hz)/Audio IN
17
USB - USB connection
USB type A – USB 2.0 (max. 500mA)
18
USB - USB connection
USB type A – USB 2.0 (max. 500mA)

Connections rear side of the device
Position and function of the connections
(1 The adaptor is available as an accessory from your dealer.
21 3
10
11
5 6
4 9
17
16
14
15
12
13
18
78

One 55
User manual
11
Mounting on the table stand
For mounting the TV set on the table stand use the tool supplied (Torx
T20, Allen key SW3).
Make sure during the mounting that the TV set and table stand are
not scratched or damaged.
Follow the safety instructions when mounting in chapter For your
safety.
Delivery specification of the table stand:
(A) Table stand rotation unit with mounted cover (X)
(B) Table stand plate
(C) M5x16 screws (4 items)
(D) M4x12 screws (4 items)
Step 1: Checking the rotation unit cover
Please check whether the cylindrical
cover (X) of rotation unit (A) is placed
in the correct position.
The pin (Y) and the centre hole (Z)
must be positioned as shown in the
adjacent figure. In this case, you can
proceed with the assembly.
Should this not be the case, please
pull off the cover (X) from the rotation
unit (A), and plug it into the correct
position again.
Step 2: Assembly of the rotation unit
Position the rotation unit (A) on the
table stand plate (B). The pin (Y) must
fit into the appropriate hole in the plate.
Use the four countersunk screws (C)
M5x16 to fasten the rotation unit (A)
on the table stand plate (B).
Tighten the screws with Allen key SW3
finger tight (torque approx. 5 Nm).
X
Z
Y
A
B
C
A
Y
3
;
Step 3: Positioning of the TV set
Position the TV set with the help of
another person on the table stand.
Make sure that the brackets (N1) and (N2)
are hooked into the slots on the TV.
Then apply slight pressure to click
bracket (N3) into place.
Step 4: Aligning and mounting the TV set
Fix the TV set using the four screws
(D) and M4x12 and Torx T20 wrench
(tighten only slightly).
Align the TV set with a spirit level. For
better protection against scratching
use a fleece as intermediate layer.
Then tighten the four screws (D).
Torque approx. 2 Nm (tighten hand-
tight).
Cable fixing
Using the Velcro cable tie supplied, you can fix the rear cables.
N1 N2
N3
D

Mounting on the table stand

One 55
User manual
12

Preparing the TV set
Installing the TV set
Choose a place for installing your TV set where no bright light or
sunlight shines directly onto the screen. This could cause reflections
which impair the picture.
3 times the screen diagonal can be taken as a guide value for the
viewing distance (e.g., for a 55-inch set approx. 4,2 m for SD signal).
The viewing distance can be reduced with an HD/UHD signal.
Connecting the TV set
Connecting to the mains supply
Connect the TV set to a 220-240V mains socket:
Connect the plug of the power cord fixed to the TV set with a mains
socket.
Connecting antennas
Cable (analogue) / DVB-C / DVB-T antenna:
Plug the cable of antenna, cable TV system or room antenna into the
ANT TV socket.
If you want to use analogue cables / DVB-C connection and a DVB-T
antenna together, use an external antenna switch (available from
your dealer).
Satellite antenna DVB-S:
Depending on the used satellite system, connect a connecting cable
from the multi-switch or directly from the LNC to the ANT-SAT and
ANT-SAT2 sockets of the TV set respectively.
When connecting the TV set to a single cable community antenna,
connect the ANT-SAT and ANT-SAT2 sockets directly to the
appropriate SAT antenna socket.
When connecting the TV set to a DiSEqC single cable community
antenna (in accordance with EN 50494), connect the ANT-SAT
socket directly to the appropriate SAT antenna socket.
In case of a DiSEqC one cable communal system you require only
one antenna cable. Further distribution of the signal to the two
reception routes is accomplished by the TV set’s satellite tuner.
It is possible, however, to continue using an existing SAT cabling
with two antenna cables in a DiSEqC one cable communal system.
If two transmission channels of the DiSEqC single cable community
exist, one system channel is used per satellite antenna cable (see
also chapter Initial installation, section DiSEqC single cable
community antenna).
Ask your dealer in this regard.
Connecting the TV set to the Home network
You may link your TV set to the home network by a wired connection
(Ethernet, Powerline adapters separately available) or by a wireless
radio connection (WLAN). For wireless connections, the TV set has
an internal WLAN antenna.
In order to play back data from your home network your Loewe TV
supports the UPnP AV standard.
For the network adaptor configuration, see chapter System settings,
section Multimedia / Network– Network settings.
U nder no circumstances may the TV set be wired and at the
same time connected by a wireless connection to the same
network, e.g. router. This may cause severe operational faults!
Example for a wired connection
Connect the LAN socket of your TV set to the LAN switch/router of
your home network with a network cable (available from your dealer).
R TV
Cable
analogue /
DVB-C
DVB-T DVB-S
DSL
LAN switch/router
TV set PC

One 55
User manual
13
Preparing the remote control unit
Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batteries
together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
The position of the batteries is indicated in the battery compartment
(in opposite directions). Pay attention to the correct polarity of +
and – when inserting the batteries.
If the batteries are too weak after longer use, the TV set prompts you to
change the batteries. Dispose of used batteries in an environmentally
friendly way (see chapter Environment / Legal information).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control for operating the TV set
Press the TV key.
See in chapter External devices,section Setting the
remote control how to operate other Loewe
appliances and how to re-programme the remote
control keys.
AAA LR03
AAA LR03

Preparing the TV set
Example for a wireless connection
You can connect the TV set to your home network by a wireless radio
connection via the WLAN antenna inside the set.
Shadow effects of various materials, such as reinforced concrete,
metal surfaces, etc., attenuate the WIFI signal sometimes
significantly or completely.
Help for configuration problems
Loewe cannot provide any support for PC hardware and software or
network components owing to the diverse configuration options with
home networks.
Please contact the administrator of your home network and/or specialist
dealer for support when setting up and for maintenance of network
connections, storage media, media server software and network devices
such as routers.
DSL
WLAN router
TV set PC

One 55
User manual
14
Switching the TV set ON/OFF
Switching TV set to the standby mode
Switch the mains switch on the bottom side of the device to position I.
The indicator on the front side lights up white. The set is now in
standby mode..
Switching the TV set on/off via the local operating panel
To switch the TV set into Operating mode or switch it
off into Standby mode, press the button on the
local operating panel.
When pressing the buttons M/V+/V–, the device
switches on in the previously used mode (TV/Radio),
when pressing the button R, in the radio mode.
Meaning of the LED colours:
white: TV set in standby.
white, intermittent: TV set starts.
green: TV set switched on.
red: timer recording active.
blue:
TV set instandbyand background operation
active (EPG data updating, software
update).
After switching on the TV set, it takes a few seconds for further
operating commands to be processed (Exception: Quick start
mode, see chapter System settings, section Control – Quick
start mode). Your TV set is ready for operation once the LED
display lights green.
M
R
V+
V-
P+
P-
Power switch
LED display
Local operating panel
M
R
V+
V-
P+
P-

Switching the TV set ON/OFF
Switching the TV set on by means of the Remote control
Press the on/off key.
Or:
Press the TV key.
The previously watched station will be called.
Or:
Press numerical keys 1-9.
The corresponding station will be called.
After switching on the TV set, it takes a few seconds for further
operating commands to be processed (Exception: Quick Start Mode,
see below). Your TV set is ready for operation once the LED display
lights green.
Switching the set off with the remote control (Standby)
Press the on/off key.
Before switching off the set with the mains switch,
we recommend you to switch it to standby mode.
Switching off the TV set and connected additional devices
(System standby)
Press on/off key long:
Switch TV set and all CEC-capable devices connected
to the HDMI interfaces OFF to Standby mode (System
Standby).
Technical information
Switching off the TV set with the mains switch during operation or an
inadvertent disruption to the power supply (e.g. power failure) can
cause damage to the hard disk file system of an externally connected
hard disk and hence loss of the recorded broadcasts.
Before switching off the set with the mains switch, we recommend
you to switch it to standby mode.
However, if unexpected problems occur when operating the hard
disk, formatting the external hard disk may rectify this. Refer to the
instructions in chapter System settings, section Control – Hard
disks.
Loewe are not liable for the loss of data on the hard disk externally
connected to your TV set. To avoid data loss, we recommend copying
important recordings to an additional external storage medium.

One 55
User manual
15

General information on menu operation
General information on menu operation
The most important keys for navigation will be explained in general.
The numbers in the text refer to the figure showing the remote control
in chapter Remote control.
The arrow keys
22 help you to navigate in the menus and lists of the
TV set and for selecting menu items. They are arranged in the middle
of the remote control in a circle around the OK key
11 . Later in this
user manual they will be represented as follows:
 Select the desired item.
The OK key
11 is used to confirm a selection, for calling the highlighted
menu item and for opening the station list. In this user manual, an
instruction for this key looks like the following:
OKconfirm.
Using the numerical keys of your remote control
29 you enter
programme channels and teletext pages directly. With key 0you open
the AV list. In this user guide, entering numbers with numerical keys
is shown as follows:
Entering programme channel directly.
The numerical keys are also used to enter text (see chapter General
information on menu operation,section Entry of characters by
remote control).
The Home view is the central overview page for all of your TV set‘s
operating modes. You reach Home view with the HOME key
27 .
HOME: Call Home view.
Pressing the BACK key
24 briefly brings you one level up in the wizard.
Pressing the BACK key longer closes all opened fade-ins. An example
for the BACK key in this user manual:
BACK: Stop text entry and exit entry box.
Pressing longer on the INFO key
25 displays an explanation of the
most important key functions of the current operating mode (e.g. TV
mode, teletext, PIP, etc.).
If the function for a key is not available, this will be indicated by an
inserted symbol on the right above.
Structure of the Menu screen
Basically, the structure of the different menu screens is similar,
depending on the fact if a wizard, rendering media content or a setup
menu are concerned. The structure is explained by means of three
different illustrations.
Screen structure: Wizard
(A) Title bar with name of the wizard and the current operating step.
(B) Selected items, whose number can be different according to the
operating step.
(C) Bottom line showing the available operating controls. If required,
instructions and information are inserted.
Screen structure: Rendering of media content (example:
Audio player)
(A) Title bar with selected album / subdirectory.
(B) Menu item Back to exit the menu or to go back to the previous
menu item.
(C) Selection of album or title
(D) Time bar
(E) Bottom line with the different symbols for controlling the playback
function.
A
C
B
INITIAL INSTALLATION - Menu language
Proceed withBack with
Which menu language do you want to use for operation?
Deutsch (de) Ελληνικά (el) Svenska (sv)
English (en) Polski (pl) Dansk (da)
Français (fr) Magyar (hu) Português (pt)
Italiano (it) Suomi (fi) Русский (ru)
Español (es) Slovenščina (sl) Norsk (no)
Nederlands (nl) Slovenčina (sk) ₼㠖 (zh)
Čeština (cs) Türkçe (tr)
Chasing Cars Shut Your EyesHands Open
Snow Patrol / Eyes Open
00:00 02:56 04:27
A
C
B
D
E
Back

One 55
User manual
16

General information on menu operation
Screen structure: Setup (example: picture)
(A) Selected function in the Home overview (here: system settings)
(B) Home Menu System settings, with selected menu item Picture.
(C) Menu items Picture focusing on Contrast.
(D) Help text for the selected menu item Picture > Contrast.
Navigation: Selection of elements (example: On-screen displays)
Highlighting and thus selecting the symbols/elements or menu items
on the screen can be effected by the arrow keys on the remote control.
So you can see all the time where you are. As soon as there is a bar
above a symbol or text, this is a selected element.
(A) Selectable elements / menu items.
(B) The text in the line where the marker is currently located is white.
(C) Move the selection marking by means of the arrow keys 
to the menu item to be set.
The position of the marking is to see by a grey rectangle.
In most cases, the marked menu item will be automatically
adopted. The font colour of the previously active item will change
to grey, that of the newly selected item to white.
In a few menus, to confirm a selected menu item is required by
pressing OK.
Picture
Picture
ad
-
justment
Contrast
Brightness
Colour in-
tensity
Image+
Active
Picture for-
mat
more ...
If your desired display format has not been automatically
selected then you can choose it in the 3D settings menu.
You may display the 3D image in 2D or vice versa.
ACB D
...... On-screen
displays Display time
Volume display
Automatic menu info
Key explanation
Permanent clock display
Automatic HDMI hint
Right info display
Switch off curtain
On-screen displays
If you select "on" here, the informational text belonging to each selected menu item will always appear
simultaneously.
Back
< 7s >
off on
off on
off on
off on
off on
off on
< 1s >
< 7s >
off on
on
off on
off on
on
on
< 1s >
A
BC
Navigation: Wizards
If the menu item(s) (marked white) is/are already
correctly preset:
Go to next step.
Otherwise:
Mark themenu itemthat youwant to change.
The update will be adopted automatically.
The fount colour of the previously active
item will change to grey. If not,
OK confirm the selection.
Go to next step.
Navigation: Element selection in lists using initials
Using the numerical keys of the remote control you can jump into list,
e.g., Internet radio station lists.
If the list is sorted in alphabetical order, you jump to the entered letter.
For example, when pressing the key 7three times you jump to the first
list element starting with letter R.
In case of numerical sorting, you can directly select the stations with
the numerical keys.
Please specify whether you want to search for scrambled stations too.
Note: Scrambled stations can only be received with an integrated CA module and
additional card.
Scrambled stations
Search method
Symbol rate
Accept Logical Channel Number
DVB-S settings (ASTRA1 19,2°E)
Back with Proceed with
no
yes
Network search
Frequency search
22000
no
yes

One 55
User manual
17

General information on menu operation
Entering characters with on-screen keyboard
For certain functions, entering letters or characters is required, e.g., for
Web addresses (URLs) in the browser or for renaming archive entries.
An on-screen keyboard appears for entering text.
 Select character / on-screen button,
OK Adopt character.
In the event of letters with a triangular, additional
letters are displayed when pressing the OK button
longer (2 sec).
For the selection of special characters use the .-/
field.
To conclude the entry:
 Select Adopt,
OK confirm the selection.
Entry of characters by remote control
Alternatively to the on-screen keyboard you can also enter the desired
characters by means of the remote control (as with the keypad of a
mobile phone).
 Select text entry field.
Under the 1st letter of the name you will see a line
indicating the current input position.
Input position one character to the right (also for
blanks).
Input position one character to the left.
Input the letters one after another. When using the
remote control, press the numerical keys just as on
a mobile phone keypad (0-9) until the desired symbol
is displayed. The available letters are printed on the
individual numeric buttons.
You find the exact key assignment in the character
table in the right column.
To conclude the entry:
 Select Adopt,
OK confirm the selection.
q
a
y
1
w
s
x
2
e
d
c
3
r
f
v
4
t
g
b
5
z
h
n
6
u
j
m
7
i
k
.-/
8
o
l
9
P
I
0
ABC
http://www.loewe.tv
.com .net . /.dewww.
Enter/change internet address
Back
Delete Cancel AdoptSpace
(2 sec) on a letter with a triangle shows more letters
OK
Table of characters for entering text by means of the remote
control
Key Characters (uppercase - lowercase)
1[space] 1
2A B C 2 Ä Æ Ã Å Ā À Á Ć Ç Č - a b c 2 ä æ ã å ā â à á ć ç č
3D E F 3 Ė Ë Ē Ę Ê È É - d e f 3 ė ë ē ę ê è é
4G H I 4 Ï Ī Į Î Ì Í - g h i 4 ï ī į î î ì í
5J K L 5 - j k l 5
6M N O 6 Ö O E Õ Ō Ô Ò Ó Ø - m n o 6 ń ñ ö o e õ ō ô ò ó ø
7P Q R S 7 ß - p q r s 7 ß
8T U V 8 Ü Ū Û Ù Ú - t u v 8 ü ū û ù ú
9W X Y Z 9 - w x y z 9
0. 0 - / _ : + , ; ? ! = & # % ~ @ $ * ’ ( ) ” § \ { } [ ] < > ´ ` ^ |

One 55
User manual
18

On-screen displays
Operation without remote control
Operation without remote control
Changing Volume
+ / – Increase/reduce volume.
Select station
P+ / P– Next/previous station.
Switching radio on or off or switching to radio
R Radio on or switch between TV and Radio.
Calling direct control on TV set
M Call direct control on TV set.
R Scroll down.
M Scroll up.
V– Scroll left.
V+ Scroll right, adopt settings, confirm.
Close all displays
Press M longer.
Explanations of the settings:
Operating
mode
Switch between TV and radio operation.
Stations
selection
Call Station selection.
AV selection Select AV interface.
Contrast Set contrast.
The power consumption of the TV set depends
directly on the value set here.
Picture
format
Selecting the picture format.
Service The Service menu item is provided for service
purposes by dealers only.
M
R
V+
V-
P+
P-
M
R
V+
V-
P+
P-
Operating
mode
Station selec-
tion
AV selection
Contrast
Picture for-
mat
Service
Explanation of keys
An explanation of the main operating keys that can be used at the
moment, can be displayed.
The availability of the key explanation is dependent on the currently
active operating situation.
INFO press longer: show Explanation of keys.
INFO or BACK: hide Explanation of keys.
Explanation of symbols
On screen pages with operating symbols in the bottom line, an explanation
of the function appears as soon as the symbol is selected.
Automatic menu info
The automatic menu info provides an info text for the selected menu
item appropriate to the on-screen display that can assist you further
with the operation of your TV set.
An on-screen display is displayed.
The factory setting is that the info display is shown
automatically for each menu item. In this case you can
temporarily hide the info texts with the INFO key.
Permanent clock display
The clock display can be permanently shown. It is always visible as
long as no other display is made.
You can switch the permanent clock display on or off in Home view
under System SettingsטControlטmore ...ט On-screen displays.
Timer list
Menu options
Station list
Expanded station list
Exit/End
Last stations (list)
Last station
Language / sound
Timeshift
Recording
Key explanation
(2sec)
(2sec)
(2sec)
(2sec)
(2sec)
BACK
USB1 -> CRW_7266b Back
... Energy effi-
ciency
Home Mode
Premium
Mode
Shop Mode
The priority here is low energy consumption in home use.
In this case, the TV switches off automatically for the sake
of saving energy, after it has been out of operation for four
hours.
Adopt with
OK

One 55
User manual
19

Initial installation
Initial installation wizard
Initial installation after switching on for the first time
The Initial installation wizard starts automatically with an initial
installation. It may be called repeatedly again (see chapter System
settings,section Extras – Repeat initial installation).
If a parental lock is activated, the access code must be entered
before repeating initial installation (see chapter System settings,
section Control – Parental lock).
For information on navigation within the wizard refer to chapter
General information on menu operation.
First installation wizard routine
The selected settings affect the routine of the Initial installation wizard.
 Select desired Menu language.
Selecting the language of the user guidance is the
wizard’s first step. Then you simply follow the
instructions on your TV screen.
Proceed to next step.
A licence agreement will be displayed.
 Scroll through the licence agreement.
OK Confirm the licence agreement and proceed to
the next step.
 Select Energy efficiency.
Determine how energy efficient your TV set shall
be. The value for the contrast (and thus the
brightness of the background lighting) is adapted
and the automatic dimmer activated or
deactivated depending on the presetting.
The automatic shutdown is active in the mode
Home Mode.
Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)
English (en) Polski (pl) Dansk (da)
Français (fr) Magyar (hu) Português (pt)
Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru)
Español (es) Slovenščina (sl) Norsk (no)
Nederlands (nl) Slovenčina (sk) 中文(zh)
Čeština (cs) Türkçe (tr)
INITIAL INSTALLATION - Menu language
Proceed with
Which menu language do you want to use for operation?
Menu
language
Here you define how energy efficiently you operate your TV. With the "Home Mode"
setting you put the focus on low energy consumption for home use. The "Premium Mode"
is optimised to a brighter environment with a higher energy consumption. The "Shop
Mode" is designed for operation in a showroom.
Note: If you select "Home Mode" here, the TV set will automatically switch off to save
energy after no longer being operated for 4 hours.
Energy efficiency
Back with Proceed with
Home mode Premium mode Shop mode
Energy
efficiency
Home mode:
The emphasis for home use is on low energy
consumption. The automatic dimmer is activated.
Premium mode:
This mode optimises the settings to a brighter
environment at a higher energy consumption. The
automatic dimmer is activated.
The use of this energy efficiency setting must be
confirmed afterwards once again.
Shop mode:
The picture settings are aligned to operation in
the presentation room. The automatic dimmer is
deactivated. If the ambient brightness diminishes, the
energy consumption is not reduced.
The use of this energy efficiency setting must be
confirmed afterwards once again.
The presetting can be changed later in the System
settings under Control טEnergy efficiency.
Proceed to next step.
 Select Location of TV set (national defaults
are adopted).
For certain locations (e.g., Australia), there is finally
a selection screen where you can indicate in which
state/territory the device is being operated.
Proceed to next step.
 Select the Operating mode.
Use the TV set as a TV set:
Continued with Connect antennas cable(s) (see
next page).
Use the TV set just as a monitor:
see chapter Initial installation, section TV set as a
monitor
Energy
efficiency
(continued)
Please specify the location of your TV set so that the available stations can be sorted
according to the specify country.
Location of TV set
Back with Proceed with
(DK) Denmark
(E) Spain
(F) France
(FIN) Finland
(H) Hungary
(I) Italy
(IRL) Ireland
(L) Luxembourg
(N) Norway
(NL) Netherlands
(NZ) New Zealand
(P) Portugal
(PL) Poland
(RUS) Russia
(S) Sweden
(SK) Slovakia
(SLO) Slovenia
(TR) Turkey
(UK) United Kingdom
Other country
Location of
TV set
Operating
mode
Please specify if you wish to use the full TV function of your set, or if you wish to use it
purely as a monitor.
Operating mode
As TV set As monitor only
Back with Proceed with

One 55
User manual
20

Initial installation
Select antenna cable.
OK Connect/disconnect antenna cable.
Select the antenna cables that are connected to
your TV.
Ahead of each selected antenna, the symbol
appears.
Cable analog: analogue stations via
cable
Terrestrial (DVB-T): digital stations via
antenna
Cable (DVB-C): digital stations via
cable
Satellite (DVB-S/cable 1): digital stations via
satellite
Satellite (DVB-S/cable 2): digital stations via
satellite
Proceed to next step.
The rest of the initial installation wizard routine
depends on the selected antennas (Cable analogue,
DVB-T, DVB-C, DVB-S) in step Connect antennas
cable(s).
The different antennas/types of reception are
described in the following sections of initial installation.
Antenna cable(s) for: to antenna socket(s):
Cable analog ANT TV
Terrestrial (DVB-T) ANT TV
Cable (DVB-C) ANT TV
Satellite (DVB-S / cable 1) ANT SAT
Satellite (DVB-S / cable 2) ANT SAT2
Your television will automatically search for stations. With , highlight which antenna
cables are available for your TV set and connect them to the correct antenna sockets,
which are specified here in the right-hand column.
Connect antenna cable(s)
Back with Proceed with
OK
Connect
antennas
cable(s)
Setting options for reception via Cable analog:
If you have not selected Cable analog in step Connect antenna
cable(s) in the initial installation, proceed to the next section Setting
options for DVB-T reception
.
The selection of a Colour standard is only required
when the Location of TV set Other country was
selected. Otherwise, the country-specific default
settings will be preset when selecting the Location
of TV set. This step will be skipped then
 Select appropriate colour standard.
Proceed to next step.
Please select the TV/colour standard.
Automatic BG+L SECAM-BG
PAL-BG SECAM-DK
PAL-DK SECAM-L
PAL-I NTSC
TV/col. standard
Back with Proceed with
TV/col.
standard