CR3000 SERIES COMPACT CASH DRAWER SPECIFICATIONS
MECHANICAL
Weight 14.3 lbs
Dimension (in inches)
Height x Width x Depth 3.3" x 15.7" x 16.1"
Bill and Coin Tray Adjustable slots
ELECTRICAL
CR3000 (Control signal from POS printer)
Pulse amplitude 12 to 24 volts DC
Pulse width 100 to 200 milliseconds
Pulse duty cycle 10% max.
CR3001
Power adapter input 120VAC; 220VAC optional
Power adapter output 12VAC
Power adapter current 1000mA
CR3002
Pulse amplitude 12 volts
Pulse width 50u sec - 6.7m sec
Pulse duty cycle 20% min
INTERFACE
CR3000 (Printer Driven) Connects to POS printer drive
circuit via supplied cable
CR3001 (4-in-1 smart interface)
Serial input
Data format RS232C
Protocol
Baud Rate 150, 300, 600, 1200, 2400, 4800, 9600*,19200
Parity None*, Odd, Even
Data Bits 7, 8*
Parallel input
Data format Centronics interface
*Default values
CR3002 RS232C, any protocol, bus powered
OPEN DRAWER COMMAND
CR3000 Pulse from Printer drive circuit
CR3001
Printer Pulse from Printer drive circuit
Dedicated RS232C Any software transmitted data
Non-dedicated RS232C User Programmable security code
(1-255 hex, preset to 07 Hex)
Parallel User Programmable security code
(1-255 Hex, preset to 07 Hex)
CR3002 Any software transmitted data
NOTES
CR3000
Logic Controls supports all POS printers. Please specify POS
printer type when ordering. Cable and keys supplied.
CR3001
Power adapter, serial interface cable (to computer) and keys
supplied. For parallel connections user must supply cables.
CR3002
No power adapter required. Manual, keys, and serial interface
cable supplied.
CONNECTOR PINOUT INFORMATION CR3001
P1 (DB25M) - Parallel input from computer
1 -Strobe 10 -ACK
2 Data 0 11 Busy
3 Data 1 12 Paper End
4 Data 2 13 Select
5 Data 3 14 -Auto Feed
6 Data 4 15 -Error
7 Data 5 16 -Initialize Printer
8 Data 6 17 -Select Input
9 Data 7 18-25 Ground
P2 (DB25F) - Parallel output to printer
1 -Strobe 10 -ACK
2 Data 0 11 Busy
3 Data 1 12 Paper Feed
4 Data 2 13 Select
5 Data 3 14 -Auto Feed
6 Data 4 15 -Error
7 Data 5 16 -Initialize Printer
8 Data 6 17 -Select Input
9 Data 7 18, 21, 25 Printer detection
19, 20, 21-24 Ground
P3 (DB25M) - Serial input from computer
2 Receive Data 8 Data Carrier Detect
3 Transmit Data 9 Open-drawer indicator
4 Request To Send 11 Open-drawer indicator
5 Clear To Send 18 POS printer interface
6 Data Set Ready 20 Data Terminal Ready
7 Ground 25 POS printer interface
P4 (DB9F) - Pass-thru serial port (input/output)
1 P5 pin 1 6 P5 pin 6
2 Transmit to peripheral 7 P5 pin 7
3 Receive from peripheral 8 P5 pin 8
4 P5 pin 4 9 P5 pin 9
5 Ground
P5 (DB9M) - Pass-thru serial port (input/output)
Same connections as P4
P6 (DB9M) - Serial input from computer
1 DCD 5 Ground
2 Receive Data 6 DSR
3 Transmit Data 7 RTS
4 DTR 8 CTS
Pins 7 and 8 are tied together internally
Pins 1, 4, and 6 are tied together internally
CR3002
BACK PANEL INFORMATION
CR3000 CR3001
P1
P2
P3 P4
P5
P6
LOGIC CONTROLS, INC., NY, USA
An Innovative Manufacturer Since 1982
www.logiccontrols.com
CR3003 USB Interface, bus powered
CR3003
Pulse amplitude 12 volts
Power Consumption < 100mA
CR3003 User Programmable security code
(1 to 5 bytes)
CR3003
No power adapter required.
CR3003
