Logic Controls PD3000 Series User manual

OPTICAL (FLUORESCENT DISPLAY)
Digits per Row 20
Number of Rows 2
Digit Configuration 5 x 7 Dot Matrix
Digit Height 0.20 in. (5.0mm)
Digit Width 0.14 in. (3.5mm)
Digit Pitch 0.20 in. (5.0mm)
Character Configuration ASCII
Brightness 200 fl (690 cd/m2) max.
Display Color Green
MTBF 300,000 hours
ELECTRICAL
Input Power (to adapter) 120VAC, 60Hz
220VAC, 60Hz (optional)
Output Power (from adapter) 6.0VAC, 1000mA
Connector 2 conductor female jack
Pole Connector 6-pin DIN (male)
Interface Cable
Pole side connector 6-pin DIN (female)
Computer side connector DB9 (female)
Power connector 2 conductor male jack
ENVIRONMENTAL
Operating Temperature 0 to +50C
Storage Temperature -20 to +70C
Relative Humidity
Operating 85% max. non-condensing
Non-operating 90% max. non-condensing
Vibration (10 to 55 Hz.) 4 G's
Shock 40 G's
INTERFACE
Serial RS232C
Protocol:
Baud Rate 600, 1200, 2400, 9600*,
19,200
Data Bit 8
Parity None
Stop Bits 1, 2*
RTS/CTS Control lines are tied together in the connector.
DSR/DCD/DTR Control lines are tied together in the connector.
Parallel Optional Interface
Pass-Thru Serial, Parallel
* Preset at Factory
GENERAL INFORMATION
Power adapter and 6 foot cable (with DIN 6F and DB9F
connectors) are supplied with product.
POLE DISPLAY EMULATION
The PD3000 series pole display is extremely versatile. It can
emulate many other pole display command sets and support OPOS.
MECHANICAL
Weight 2.7 lbs.
Dimensions (in inches) (width x height x depth)
Fluorescent Display 7.87 x 3.37 x 1.75
Rectangular Base 2.12 x 2.00 x 2.25
Base Plate 4.00 x 0.90 x 8.00
Overall Height 8 to 25 inches
CONNECTOR PINOUT
SERIAL
DB9 Female connector
Pin # Function
1 DCD
3 Data
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
DB25 Female connector
Pin # Function
2 Data
7 Ground
4 RTS
5 CTS
6 DSR
8 DCD
20 DTR
PARALLEL
DB25 Male connector
Pin # Function Pin # Function
1 -Strobe 10 -ACK
2 Data 0 11 Busy
3 Data 1 12 Paper End
4 Data 2 13 Select
5 Data 3 14 -Auto Feed
6 Data 4 15 -Error
7 Data 5 16 -Initialize Printer
8 Data 6 17 -Select Input
9 Data 7 18-25 Ground
ORDERING INFORMATION
PD3000 SERIES CUSTOMER DISPLAYS SPECIFICATIONS
1
1
1
PD3 _ _ _ U
POWER ADAPTER
0 = 120VAC
1 = 220VAC
SERIAL / PARALLEL INTERFACE
0 = SERIAL 9600 BAUD
1 = " 600 "
2 = " 1200 "
3 = " 2400 "
4 = " 4800 "
5 = " 19200 "
9 = PARALLEL INTERFACE
COMMAND SET
0 = LOGIC CONTROLS
1 = LOGIC CONTROLS
WITH PASS - THRU
2 = SPECIAL COMMAND SET 1 (Aedex)
3 = SPECIAL COMMAND SET 2 (Noritaki)
4 = SPECIAL COMMAND SET 3 (Epson)
5 = SPECIAL COMMAND SET 4 (UTC)
9 = OPOS
5
6
9
13
14
25
13
14 25
USB Optional Interface
USB INTERFACE
LOGIC CONTROLS, INC., NY, USA
An Innovative Manufacturer Since 1982
www.logiccontrols.com