Logic Controls LD9000 Series User manual

OPTICAL (FLUORESCENT DISPLAY)
Digits per Row 20
Number of Rows 2
Digit Configuration 5 x 7 Dot Matrix
Digit Height 0.37 in. (9.5mm)
Digit Width 0.24 in. (6.2mm)
Digit Pitch0.30 in. (7.7mm)
Character Configuration ASCII
Brightness900 cd/m2 Typical
Display Color Blue-green
MTBF300,000 hours
ELECTRICAL
Input Power (to adapter) 120VAC, 60Hz
220VAC, 60Hz (optional)
Output Power (from adapter) 7.5VAC,1A
Connector 2conductor female jack
Pole Connector 6-pin DIN (male) / 8-pin mini-DIN (male)
Interface Cable
Pole side connector 6-pin DIN (female) / 8-pin mini-DIN (female)
Computer side connector DB9 (female); Optional DB25 (female)
Power connector 2conductor male jack
ENVIRONMENTAL
Operating Temperature 0 to +50C
Storage Temperature -20 to +70C
Relative Humidity
Operating 85% max. non-condensing
Non-operating 90% max. non-condensing
Vibration (10 to 55 Hz.) 4 G's
Shock 40G's
INTERFACE
Serial RS232C
Protocol:
Baud Rate 600,1200,2400,9600*,
19,200
Data Bit 8
Parity None
Stop Bits 1, 2*
RTS/CTS Control lines are tied together in the connector.
DSR/DCD/DTR Control lines are tied together in the connector.
Parallel Optional Interface
Pass-ThruOptional Serial or Parallel
* Default Preset at Factory
GENERAL INFORMATION
Power adapter and 6 foot cable (with DIN 6F and DB9F
connectors) are supplied with product.
POLE DISPLAY EMULATION
The LD9000 series pole displays are very versatile. They can
emulate many other pole display command sets and support OPOS.
MECHANICAL LD9000 LD9000X
Weight2.7 lbs. 2.9 lbs.
Dimensions (in inches)(width x height x depth)
Fluorescent Display8.50 x 3.37 x 1.75 8.50 x 3.37 x 2.25
Rectangular Base2.12 x 2.25 x 2.12 2.12 x 2.25 x 2.12
Base Plate 4.00 x 0.90 x 8.00 4.00 x 0.90 x 8.00
Overall Height8 to 25 inches 8 to 25 inches
CONNECTOR PINOUT
SERIAL
DB9 Female connector
Pin # Function
1 DCD
3 Data
4 DTR
5 Ground
6 DSR
7 RTS
8 CTS
DB25 Female connector
Pin # Function
2 Data
7 Ground
4 RTS
5 CTS
6 DSR
8 DCD
20 DTR
PARALLEL
DB25 Male connector
Pin # Function Pin # Function
1 -Strobe 10 -ACK
2 Data 0 11 Busy
3 Data 1 12 Paper End
4 Data 2 13 Select
5 Data 3 14 -Auto Feed
6 Data 4 15 -Error
7 Data 5 16 -Initialize Printer
8 Data 6 17 -SelectInput
9 Data 7 18-25 Ground
ORDERING INFORMATION
.
LD9000 SERIES CUSTOMER DISPLAYS SPECIFICATIONS
1
1
1
LD9 _ _ _ X U
POWER ADAPTER
0 = 120VAC
1 = 220VAC
SERIAL / PARALLEL INTERFACE
0 = SERIAL 9600 BAUD
1 = " 600 "
2 = " 1200 "
3 = " 2400 "
4 = " 4800 "
5 = " 19200 "
9 = PARALLEL INTERFACE
5
6
9
13
14
25
13
14 25
COMMAND SET
0 = LOGIC CONTROLS
1 = LOGIC CONTROLS with Pass-thru
USB Optional Interface
DOUBLE SIDE
USB INTERFACE
LOGIC CONTROLS, INC., NY, USA
An Innovative Manufacturer Since 1982
www.logiccontrols.com
2 = SPECIAL COMMAND SET 1 (Aedex)
3 = SPECIAL COMMAND SET 2 (Noritaki)
4 = SPECIAL COMMAND SET 3 (Epson)
5 = SPECIAL COMMAND SET 4 (UTC)
9 = OPOS