Logic PD Zoom Texas Instruments OMAP-L138 EVM User manual

Baseboard
OMAP-L138
SOM-M1
4.3” LCD
Power Supply & Cord
(use power cord specific
to your region)
USB SD Card
Reader
Demo setup.
(Setup development kit to sample OS demos.)
1Connect OMAP-L138
SOM (use outline on
baseboard for positioning),
press straight down over
connectors
2Connect 4.3” LCD,
remove protective
plastic covering 3Choose OS demo and
insert SD card
(slot on bottom of
baseboard)
4Verify all DIP switches
are set to OFF 5Connect power cord and supply 6Connect power to baseboard
7Switch power on 8GUI will appear on LCD
screen (Linux demo
shown) 9To sample the other
OS demo, power off
kit and repeat
Steps 3–8 using the
other SD card
1
2
3
4
6
7
Next steps
Important baseboard locations.
(Numbers correspond to steps on the right and back pages.)
SD Cards
(Linux &
Windows CE
Demos)
L
e
g
a
l
l
y
f
r
e
e
t
o
c
o
p
y
,
m
o
d
i
f
y
a
n
d
r
e
d
i
s
t
r
i
b
u
t
e
.
U
b
u
n
t
u
a
n
d
t
h
e
U
b
u
n
t
u
l
o
g
o
a
r
e
r
e
g
i
s
t
e
r
e
d
t
r
a
d
e
m
a
r
k
s
o
f
C
a
n
o
n
i
c
a
l
L
t
d
.
w
w
w
.
u
b
u
n
t
u
.
c
o
m
Desktop Edition
UBUNTU 10.04 LTS
Ubuntu CD
12 12
14
15
User Interface (UI) Board
Ethernet Cable
Serial Cable
Items used in this QuickStart Guide.
(Complete kit contents is provided on the included Packing List.)

ZOOM™
OMAP-L138
EVM
QuickStart Guide
Congratulations on your purchase of the Zoom OMAP-L138 EVM Development Kit. This
Zoom Development Kit provides a product-ready hardware and software platform for
evaluating the functionality of the Texas Instruments (TI) OMAP-L138 processor and the
Logic PD System on Module (SOM).
For more information:
www.logicpd.com/omapl138evm
411 N. Washington Ave. Suite 400 Minneapolis, MN 55401
T : 612.672.9495 F : 612.672.9489 I : www.logicpd.com
©2010 Logic Product Development Company. All rights reserved. Zoom is a trademark of Logic
Product Development. OMAP is a registered trademark of Texas Instruments Incorporated. Terms and
product names in this document may be trademarks of others.
PN 1016598A
If you are having trouble accessing the OS demos
on the included SD cards, try the following:
+Verify that the OMAP-L138 SOM is securely
connected to the baseboard.
+Verify that all the DIP switches are set to the
OFF position.
+Verify that the correct SD card is inserted into
the baseboard.
Troubleshooting
To gain access to kit and SOM documentation,
register your kit on the Logic PD website at:
support.logicpd.com/auth/register_product.php
Register Your Kit
If the Linux SD card is connected
to your host PC, insert the included
Ubuntu CD into the host PC and
boot from CD. Locate the START
HERE folder on the SD card and run
setup.htm.
Linux DVSDK
If the Windows CE SD card is
connected to your host PC, locate
the START HERE folder on the SD
card and run setup.htm.
Windows CE SDK
For support questions, please contact:
support.logicpd.com/support/askaquestion.php
For community support, please visit:
www.ti.com/e2e
The TI Embedded Processors Wiki can be found at:
processors.wiki.ti.com
For more information on the TI OMAP-L138 processor
or to download the latest TI software, visit:
www.ti.com/omap-l138-prprod1
Connect Ethernet
cable to baseboard
and host PC or
router
13 Connect serial cable
to baseboard and
host PC
14
Next steps.
(Prepare your workstation for software development.)
12Secure boards
with included nylon
screws at the
locations indicated
10Power off kit, remove
SD card and insert into
included USB SD card
reader; connect USB
SD card reader to host
PC
11Connect UI board
to baseboard
connectors at center
and on the right