Logic LG-100U-H User manual

USB 2.0 Extender (100M)
VER 1.1
LG-100U-H

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this manual
for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged
by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Table of Contents
1. Introduction...........................................................................................
2. Features.................................................................................................
3. Package Contents................................................................................
4. Specifications.......................................................................................
5. Operation Controls and Functions......................................................
5.1 Transmitter Panel.............................................................................
5.2 Receiver Panel................................................................................
6. Application Example............................................................................
1
1
1
2
3
3
4
5

1. Introduction
2. Features
☆Support USB 2.0 protocol, transmission rate is up to 200Mbps
☆Transmission distance is up to 100m / 328ft via a single CAT5e/6 cable
☆Support one USB-B port input in the transmitter
☆Support two USB 2.0 ports output in the receiver
☆Support PoC function, it means that either transmitter or receiver is powered
through 12V/1A power adapter, the other doesn’t need power supply
☆Simple plug and play, no drive and installation setting required
☆Compact design for easy and flexible installation
3. Package Contents
①1× USB 2.0 Extender (Transmitter)
②1× USB 2.0 Extender (Receiver)
③1× USB cable (USB-B male head to USB-A male head, 1 meter )
④1× 12V/1A Locking Power Adapter
⑤1× User Manual
1 / 5
The USB 2.0 Extender can extend USB signal up to 100m / 328ft via a single
Cat5e/6 cable. In the transmitter, the USB-B port is connected to a PC. In the
receiver, you can connect a device with USB port (such as U disk or printer,
etc.)through the two USB ports. Both Transmitter and Receiver support PoC
(Power over Cable) function. The product can be widely used for long distance
signal transmission between a PC and USB device. Simple plug and play, no
drive and installation setting required.

Transmitter / Receiver: 100g
Dimensions
Weight
Metal Enclosure
Color Black
Transmitter / Receiver: 82mm (W)×49mm (D)×20mm (H)
Housing
Input: AC100~240V 50/60Hz
Output: DC 12V/1A
(US/EU standards, CE/FCC/UL certified)
Transmitter: 1.3W, Receiver: 2.3W
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~ 140°F
Power Supply
Operating Temperature
Storage Temperature
Relative Humidity 20~90% RH (non-condensing)
Power Consumption
Connection
Transmitter Input port: 1×USB [USB-B, female]
Output port: 1×CAT [RJ45, female]
Receiver Input port: 1×CAT [RJ45, female]
Output port: 2×USB [USB-A, female]
Mechanical
4. Specifications
USB Protocol USB 2.0
Technical
ESD Protection Human-body Model:
±8kV (Air-gap discharge) , ±4kV (Contact discharge)
Transmission Distance 100M (328ft)
Transmission Rate Up to 200Mbps
2 / 5

5. Operation Controls and Functions
5.1 Transmitter Panel
12
Number Function DescriptionName
1 USB(TO PC) USB port, connect to the USB port of a PC through a
USB-B male head to USB-A male head wire.
2Power LED indicator. The green LED will be on when the
transmitter is powered on.
POWER LED
3
CAT port The CAT port is connected to receiver’s CAT port via a
CAT5e/6 cable.
DC 12V Plug DC 12V/1A power supply into the unit and connect
the adapter to an AC outlet.
4
CATDC 12V
3 4
3 / 5

Plug 12V/1A DC power supply into the unit and connect
the adapter to an AC outlet.
5.2 Receiver Panel
USB 2.0 USB 2.0
DEVICE
CATDC 12V
2
1
34
Number Function DescriptionName
1 USB 2.0 port Connect to a device with USB port such as printer or U
disk, etc..
2 POWER LED Power LED indicator. The green LED will be on when the
transmitter is powered on.
3 DC 12V
4 CAT port The CAT port is connected to transmitter’s CAT port by
CAT5e/6 cable.
4 / 5

CATDC 12V
6. Application Example
Power Supply
PC
Transmitter
Receiver
Printer
U Disk
Cat5e/6 (100M)
USB 2.0 USB 2.0
DEVICE
CATDC 12V
5 / 5