LOGICDATA COSMO Austin User manual

Document Version 6 | July 2021
OWNER’S MANUAL
ADJUSTABLE BED FRAME

02 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
CONTENTS
01. SAFETY...........................................................................................................................03
02. INTRODUCTION.............................................................................................................08
03. BOX CONTENTS............................................................................................................10
04. ASSEMBLY......................................................................................................................12
05. OPERATION....................................................................................................................20
06. DISASSEMBLY AND TRANSPORTATION ...................................................................24
07. CLEANING AND MAINTENANCE .................................................................................25
08. TROUBLESHOOTING....................................................................................................26
09. TECHNICAL DATA..........................................................................................................28
10. FINAL DISPOSAL ...........................................................................................................28
COPYRIGHT®
This original documentation is protected by copyright. All rights, especially the rights to translate or
reproduce the document, are reserved. No part of this manual may be reproduced mechanically,
electronically, or by other means, in any form, without prior written permission of LOGICDATA
Electronic & Software Entwicklungs GmbH. Violations involving copyright may result in legal action.
2021 LOGICDATA Electronic & Software Entwicklungs GmbH
CONTACT INFORMATION
LOGICDATA North America Inc.
5300 Broadmoor Ave SE, Suite D
Grand Rapids, MI 49512 USA
T: +1 616 328 8841
RႈFHQD#ORJLFGDWDQHW
LOGICDATA Electronic & Software-
Entwicklungs GmbH
Wirtschaftspark 18
8530 Deutschlandsberg
Austria
03
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
1. SAFETY
IMPORTANT SAFETY INSTRUCTIONS
This Owner’s Manual was designed according to the UL 962 Standard for Household and
Commercial Furnishing. It contains safety instructions. All users must read the Owner’s Manual.
All users have a responsibility to observe the safety instructions. Important accident prevention
advice is found in this chapter.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
GENERAL SAFETY INFORMATION
The following safety regulations and obligations are valid when handling the system:
ƒDo not operate the product unless it is in full working order
ƒDo not remove, change, bridge, or bypass any protection or safety features
ƒDo not convert or modify the Adjustable Bed Frame without written approval
ƒDo not use unauthorized spare parts for repair
ƒOnly physically able adults are allowed to assemble the product
ƒDo not attempt to change or replace parts unless the product is in a de-energized state
ƒEnsure that no children or animals are in the proximity of the Bed Frame when operating it
ƒ
Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
ƒ
Do not sit directly on any Platform when operating the Bed Frame. Distribute your weight evenly
INTENDED USE
The Adjustable Bed Frame is an electrically controlled Bed Frame. Its sole intended use is de-
scribed in this documentation. The Adjustable Bed Frame is designed for indoor use and house-
hold use only. Outdoor use is forbidden. The Bed Frame is operated by a Remote Control.
HOSPITAL / MEDICAL DISCLAIMER
The Adjustable Bed Frame is not designed to comply with medical or hospital standards. It is
therefore not suitable for domestic or commercial medical use.
• Do not use the Bed Frame near to tent type oxygen or therapy equipment
• Do not use the Bed Frame near to other potentially explosive gases
The Adjustable Bed Frame may only be used with suitable mattresses. Suitable mattresses
must comply with Federal Register 16 CFR Part 1633. If unsure, ask your mattress provider if
your mattress is compatible with electrically adjustable Bed Frames. The Bed Frame must not
be used without a mattress, or with water-based mattresses. The Bed Frame may only be as-
sembled and used by adults. It is not designed for children or animals.

02
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
CONTENTS
01. SAFETY...........................................................................................................................03
02. INTRODUCTION.............................................................................................................08
03. BOX CONTENTS............................................................................................................10
04. ASSEMBLY......................................................................................................................12
05. OPERATION....................................................................................................................20
06. DISASSEMBLY AND TRANSPORTATION ...................................................................24
07. CLEANING AND MAINTENANCE .................................................................................25
08. TROUBLESHOOTING....................................................................................................26
09. TECHNICAL DATA..........................................................................................................28
10. FINAL DISPOSAL ...........................................................................................................28
COPYRIGHT®
This original documentation is protected by copyright. All rights, especially the rights to translate or
reproduce the document, are reserved. No part of this manual may be reproduced mechanically,
electronically, or by other means, in any form, without prior written permission of LOGICDATA
Electronic & Software Entwicklungs GmbH. Violations involving copyright may result in legal action.
2021 LOGICDATA Electronic & Software Entwicklungs GmbH
CONTACT INFORMATION
LOGICDATA North America Inc.
5300 Broadmoor Ave SE, Suite D
Grand Rapids, MI 49512 USA
T: +1 616 328 8841
RႈFHQD#ORJLFGDWDQHW
LOGICDATA Electronic & Software-
Entwicklungs GmbH
Wirtschaftspark 18
8530 Deutschlandsberg
Austria
03ADJUSTABLE BED FRAME - OWNER’S MANUAL //
1. SAFETY
IMPORTANT SAFETY INSTRUCTIONS
This Owner’s Manual was designed according to the UL 962 Standard for Household and
Commercial Furnishing. It contains safety instructions. All users must read the Owner’s Manual.
All users have a responsibility to observe the safety instructions. Important accident prevention
advice is found in this chapter.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
GENERAL SAFETY INFORMATION
The following safety regulations and obligations are valid when handling the system:
ƒDo not operate the product unless it is in full working order
ƒDo not remove, change, bridge, or bypass any protection or safety features
ƒDo not convert or modify the Adjustable Bed Frame without written approval
ƒDo not use unauthorized spare parts for repair
ƒOnly physically able adults are allowed to assemble the product
ƒDo not attempt to change or replace parts unless the product is in a de-energized state
ƒEnsure that no children or animals are in the proximity of the Bed Frame when operating it
ƒ
Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
ƒ
Do not sit directly on any Platform when operating the Bed Frame. Distribute your weight evenly
INTENDED USE
The Adjustable Bed Frame is an electrically controlled Bed Frame. Its sole intended use is de-
scribed in this documentation. The Adjustable Bed Frame is designed for indoor use and house-
hold use only. Outdoor use is forbidden. The Bed Frame is operated by a Remote Control.
HOSPITAL / MEDICAL DISCLAIMER
The Adjustable Bed Frame is not designed to comply with medical or hospital standards. It is
therefore not suitable for domestic or commercial medical use.
• Do not use the Bed Frame near to tent type oxygen or therapy equipment
• Do not use the Bed Frame near to other potentially explosive gases
The Adjustable Bed Frame may only be used with suitable mattresses. Suitable mattresses
must comply with Federal Register 16 CFR Part 1633. If unsure, ask your mattress provider if
your mattress is compatible with electrically adjustable Bed Frames. The Bed Frame must not
be used without a mattress, or with water-based mattresses. The Bed Frame may only be as-
sembled and used by adults. It is not designed for children or animals.
04
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
The Bed Frame is not designed for continuous operation. If the motors are overworked, the Bed
Frame will time-out automatically for several minutes. During this time, you will not be able to
operate the Bed Frame. Continued excessive use of the Bed Frame can damage the product.
• Do not operate the Bed Frame continuously
•If the time-out is reached, do not operate the Bed Frame for at least 6 minutes. This will re-
set the time-out
The recommended maximum load on the Bed Frame is 00 lbs (including the mattress). Weight must be
distributed evenly. No individual Platform is designed to support or lift this weight. UsHUVVKRXOGJHWLQ
DQGRXWRIEHGRQO\ZKHQWKH%HG)UDPHLVLQDIODWKRUL]RQWDOSRVLWLRQ'Rnot place your entire weight
on the head or foot section, especially if the Bed Frame is in an elevated position. Do not stand on the
Bed Frame or Platforms at any time. Exceeding the recommended maximum load could damage the
product and void the warranty.
Usage outside of the intended use described in this Owner’s Manual is only allowed with writ-ten consent
by LOGICDATA. Improper operation or usage outside of the intended use can re-sult in personal injury
and damage to the system. Liability and warranty claims are void in cases of usage outside of the
intended use.
REASONABLY FORESEEABLE MISUSE
Reasonably foreseeable misuse with the Adjustable Bed Frame includes, but is not limited to:
ƒUsing the Bed Frame as a climbing aid
ƒJumping on the Bed Frame
ƒAllowing children or animals to climb on or under the Bed Frame
ƒUsing the Bed Frame without a mattress or with a water-based mattress
ƒOverloading the Bed Frame (max. load is 00 lbs evenly distributed)
ƒContinuous use of the Bed Frame (see below)
TARGET AUDIENCE
This Manual is addressed to all adults responsible for assembling the Bed Frame, who:
ƒHave (at least) basic technical knowledge
ƒAre physically able to lift the components
ƒHave fully read and understood this Owner’s Manual

03
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
1. SAFETY
IMPORTANT SAFETY INSTRUCTIONS
This Owner’s Manual was designed according to the UL 962 Standard for Household and
Commercial Furnishing. It contains safety instructions. All users must read the Owner’s Manual.
All users have a responsibility to observe the safety instructions. Important accident prevention
advice is found in this chapter.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
GENERAL SAFETY INFORMATION
The following safety regulations and obligations are valid when handling the system:
ƒDo not operate the product unless it is in full working order
ƒDo not remove, change, bridge, or bypass any protection or safety features
ƒDo not convert or modify the Adjustable Bed Frame without written approval
ƒDo not use unauthorized spare parts for repair
ƒOnly physically able adults are allowed to assemble the product
ƒDo not attempt to change or replace parts unless the product is in a de-energized state
ƒEnsure that no children or animals are in the proximity of the Bed Frame when operating it
ƒ
Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
ƒ
Do not sit directly on any Platform when operating the Bed Frame. Distribute your weight evenly
INTENDED USE
The Adjustable Bed Frame is an electrically controlled Bed Frame. Its sole intended use is de-
scribed in this documentation. The Adjustable Bed Frame is designed for indoor use and house-
hold use only. Outdoor use is forbidden. The Bed Frame is operated by a Remote Control.
HOSPITAL / MEDICAL DISCLAIMER
The Adjustable Bed Frame is not designed to comply with medical or hospital standards. It is
therefore not suitable for domestic or commercial medical use.
• Do not use the Bed Frame near to tent type oxygen or therapy equipment
• Do not use the Bed Frame near to other potentially explosive gases
The Adjustable Bed Frame may only be used with suitable mattresses. Suitable mattresses
must comply with Federal Register 16 CFR Part 1633. If unsure, ask your mattress provider if
your mattress is compatible with electrically adjustable Bed Frames. The Bed Frame must not
be used without a mattress, or with water-based mattresses. The Bed Frame may only be as-
sembled and used by adults. It is not designed for children or animals.
04 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
The Bed Frame is not designed for continuous operation. If the motors are overworked, the Bed
Frame will time-out automatically for several minutes. During this time, you will not be able to
operate the Bed Frame. Continued excessive use of the Bed Frame can damage the product.
• Do not operate the Bed Frame continuously
•If the time-out is reached, do not operate the Bed Frame for at least 6 minutes. This will re-
set the time-out
The recommended maximum load on the Bed Frame is 00 lbs (including the mattress). Weight must be
distributed evenly. No individual Platform is designed to support or lift this weight. UsHUVVKRXOGJHWLQ
DQGRXWRIEHGRQO\ZKHQWKH%HG)UDPHLVLQDIODWKRUL]RQWDOSRVLWLRQ'Rnot place your entire weight
on the head or foot section, especially if the Bed Frame is in an elevated position. Do not stand on the
Bed Frame or Platforms at any time. Exceeding the recommended maximum load could damage the
product and void the warranty.
Usage outside of the intended use described in this Owner’s Manual is only allowed with writ-ten consent
by LOGICDATA. Improper operation or usage outside of the intended use can re-sult in personal injury
and damage to the system. Liability and warranty claims are void in cases of usage outside of the
intended use.
REASONABLY FORESEEABLE MISUSE
Reasonably foreseeable misuse with the Adjustable Bed Frame includes, but is not limited to:
ƒUsing the Bed Frame as a climbing aid
ƒJumping on the Bed Frame
ƒAllowing children or animals to climb on or under the Bed Frame
ƒUsing the Bed Frame without a mattress or with a water-based mattress
ƒOverloading the Bed Frame (max. load is 00 lbs evenly distributed)
ƒContinuous use of the Bed Frame (see below)
TARGET AUDIENCE
This Manual is addressed to all adults responsible for assembling the Bed Frame, who:
ƒHave (at least) basic technical knowledge
ƒAre physically able to lift the components
ƒHave fully read and understood this Owner’s Manual
05
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
EXPLANATION OF SYMBOLS AND SIGNAL WORDS
DANGER
The signal word DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
The signal word WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
NOTICE
The signal word NOTICE indicates a situation that will not lead to personal injury, but could lead
to damage to the product or the environment.
CAUTION
The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.

04
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
The Bed Frame is not designed for continuous operation. If the motors are overworked, the Bed
Frame will time-out automatically for several minutes. During this time, you will not be able to
operate the Bed Frame. Continued excessive use of the Bed Frame can damage the product.
• Do not operate the Bed Frame continuously
•If the time-out is reached, do not operate the Bed Frame for at least 6 minutes. This will re-
set the time-out
The recommended maximum load on the Bed Frame is 00 lbs (including the mattress). Weight must be
distributed evenly. No individual Platform is designed to support or lift this weight. UsHUVVKRXOGJHWLQ
DQGRXWRIEHGRQO\ZKHQWKH%HG)UDPHLVLQDIODWKRUL]RQWDOSRVLWLRQ'Rnot place your entire weight
on the head or foot section, especially if the Bed Frame is in an elevated position. Do not stand on the
Bed Frame or Platforms at any time. Exceeding the recommended maximum load could damage the
product and void the warranty.
Usage outside of the intended use described in this Owner’s Manual is only allowed with writ-ten consent
by LOGICDATA. Improper operation or usage outside of the intended use can re-sult in personal injury
and damage to the system. Liability and warranty claims are void in cases of usage outside of the
intended use.
REASONABLY FORESEEABLE MISUSE
Reasonably foreseeable misuse with the Adjustable Bed Frame includes, but is not limited to:
ƒUsing the Bed Frame as a climbing aid
ƒJumping on the Bed Frame
ƒAllowing children or animals to climb on or under the Bed Frame
ƒUsing the Bed Frame without a mattress or with a water-based mattress
ƒOverloading the Bed Frame (max. load is 00 lbs evenly distributed)
ƒContinuous use of the Bed Frame (see below)
TARGET AUDIENCE
This Manual is addressed to all adults responsible for assembling the Bed Frame, who:
ƒHave (at least) basic technical knowledge
ƒAre physically able to lift the components
ƒHave fully read and understood this Owner’s Manual
05ADJUSTABLE BED FRAME - OWNER’S MANUAL //
EXPLANATION OF SYMBOLS AND SIGNAL WORDS
DANGER
The signal word DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
The signal word WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
NOTICE
The signal word NOTICE indicates a situation that will not lead to personal injury, but could lead
to damage to the product or the environment.
CAUTION
The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
06
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
WARNING
Moderate risk of death or serious injury
The Adjustable Bed Frame can withstand a maximum load of lbs (evenly spread,
including mattress). Overloading the Bed Frame, or any single Platform, may lead to death
or serious injury.
• Do not overload the Bed Frame under any circumstances
• Do not stand on the Bed Frame
• Do not apply the maximum load to the Foot or Head Platforms
• Do not sit on the mattress while the Bed Frame is in motion. Distribute your weight evenly
DANGER
To reduce the risk of electric shock:
• Always unplug the Bed Frame from the electrical outlet before cleaning.
WARNING
7RUHGXFHWKHULVNRIEXUQV¿UHHOHFWULFVKRFNRULQMXU\WRSHUVRQV
•8QSOXJWKH%HG)UDPHIURPWKHRXWOHWEHIRUHSXWWLQJRQRUWDNLQJRႇSDUWV
•Close supervision is necessary when the Bed Frame is used by, or near children, invalids,
or disabled persons.
•Use this Bed Frame only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
•Never operate the Bed Frame if it or any parts have a damaged Cable or Plug, are not work-
ing properly, have been dropped or damaged, or dropped into water. Return the bed for ex-
amination and repair or replace it.
•(QVXUHVXLWDEOH&DEOHW\SHVDUHXVHG$FFHSWDEOH&DEOHW\SHVDUHGH¿QHGDVWKRVHIW
m) in length and that are at least as servicable as SP-2, SPE-2, SPT-2, SV, SVE or SVT types.
• Keep all Cables away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
•Do not operate the Bed Frame where aerosol (spray) products are being used or where ox-
ygen is being administered.
•
7RGLVFRQQHFWWKH%HG)UDPHWXUQDOOFRQWUROVWRWKHRႇSRVLWLRQWKHQUHPRYHSOXJIURPRXWOHW
• WARNING: Risk of injury – keep children away from the extended foot support (or other
similar parts).
• WARNING: Risk of electric shock –connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
RESIDUAL RISKS
Residual risks are the risks that remain after all relevant safety standards have been complied
with. These have been evaluated through a thorough risk assessment. Read all instructions be-
fore assembling and operating the Bed Frame.

05
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
EXPLANATION OF SYMBOLS AND SIGNAL WORDS
DANGER
The signal word DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
The signal word WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
NOTICE
The signal word NOTICE indicates a situation that will not lead to personal injury, but could lead
to damage to the product or the environment.
CAUTION
The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
06 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
WARNING
Moderate risk of death or serious injury
The Adjustable Bed Frame can withstand a maximum load of lbs (evenly spread,
including mattress). Overloading the Bed Frame, or any single Platform, may lead to death
or serious injury.
• Do not overload the Bed Frame under any circumstances
• Do not stand on the Bed Frame
• Do not apply the maximum load to the Foot or Head Platforms
• Do not sit on the mattress while the Bed Frame is in motion. Distribute your weight evenly
DANGER
To reduce the risk of electric shock:
• Always unplug the Bed Frame from the electrical outlet before cleaning.
WARNING
7RUHGXFHWKHULVNRIEXUQV¿UHHOHFWULFVKRFNRULQMXU\WRSHUVRQV
•8QSOXJWKH%HG)UDPHIURPWKHRXWOHWEHIRUHSXWWLQJRQRUWDNLQJRႇSDUWV
•Close supervision is necessary when the Bed Frame is used by, or near children, invalids,
or disabled persons.
•Use this Bed Frame only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
•Never operate the Bed Frame if it or any parts have a damaged Cable or Plug, are not work-
ing properly, have been dropped or damaged, or dropped into water. Return the bed for ex-
amination and repair or replace it.
•(QVXUHVXLWDEOH&DEOHW\SHVDUHXVHG$FFHSWDEOH&DEOHW\SHVDUHGH¿QHGDVWKRVHIW
m) in length and that are at least as servicable as SP-2, SPE-2, SPT-2, SV, SVE or SVT types.
• Keep all Cables away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
•Do not operate the Bed Frame where aerosol (spray) products are being used or where ox-
ygen is being administered.
•
7RGLVFRQQHFWWKH%HG)UDPHWXUQDOOFRQWUROVWRWKHRႇSRVLWLRQWKHQUHPRYHSOXJIURPRXWOHW
• WARNING: Risk of injury – keep children away from the extended foot support (or other
similar parts).
• WARNING: Risk of electric shock –connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
RESIDUAL RISKS
Residual risks are the risks that remain after all relevant safety standards have been complied
with. These have been evaluated through a thorough risk assessment. Read all instructions be-
fore assembling and operating the Bed Frame.
07
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
WARNING
Moderate risk of death or serious injury
2SHQLQJHOHFWULFDOFRPSRQHQWVRUDWWHPSWLQJLPSURSHUFRQYHUVLRQVRUPRGL¿FDWLRQVWRHOHFWUL-
cal or mechanical components on the Bed Frame may lead to death or serious injury.
• Do not convert or modify the Adjustable Bed Frame
• Never open electrical components
WARNING
Moderate risk of death or serious injury through crushing
When the Bed Frame moves to a new position, it is possible that persons will be crushed be-
tween the Bed Frame and foreign objects.This may lead to death or serious injury.
• Do not store foreign objects underneath the Bed Frame
• Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
WARNING
Moderate risk of death or serious injury in explosive atmospheres
Operating the Adjustable Bed Frame in potentially explosive atmospheres may lead to death
or serious injury through explosions.
• Read the relevant directives to determine whether an atmosphere is potentially explosive
• Do not operate the Adjustable Bed Frame in potentially explosive atmospheres
WARNING
Moderate risk of death or serious injury to children
Misuse of the Bed Frame around children may lead to death or serious injury.
• Activate the Child Lock when children are present
• Keep children away from moving Platforms
• Do not allow children to play with the Bed Frame
SAVE THESE INSTRUCTIONS
WARNING
Moderate risk of death or serious injury through crushing
Crawling, laying, or reaching underneath the Bed Frame may lead to death or serious injury
through crushing.
• Do not crawl, lay, or reach underneath the Bed Frame
WARNING
5LVNRIHOHFWULFVKRFN¿UHDQGLQMXU\
Review the instructions to ensure the appropriate critical components and accessories are being
iused with the furnishing.

06
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
WARNING
Moderate risk of death or serious injury
The Adjustable Bed Frame can withstand a maximum load of lbs (evenly spread,
including mattress). Overloading the Bed Frame, or any single Platform, may lead to death
or serious injury.
• Do not overload the Bed Frame under any circumstances
• Do not stand on the Bed Frame
• Do not apply the maximum load to the Foot or Head Platforms
• Do not sit on the mattress while the Bed Frame is in motion. Distribute your weight evenly
DANGER
To reduce the risk of electric shock:
• Always unplug the Bed Frame from the electrical outlet before cleaning.
WARNING
7RUHGXFHWKHULVNRIEXUQV¿UHHOHFWULFVKRFNRULQMXU\WRSHUVRQV
•8QSOXJWKH%HG)UDPHIURPWKHRXWOHWEHIRUHSXWWLQJRQRUWDNLQJRႇSDUWV
•Close supervision is necessary when the Bed Frame is used by, or near children, invalids,
or disabled persons.
•Use this Bed Frame only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
•Never operate the Bed Frame if it or any parts have a damaged Cable or Plug, are not work-
ing properly, have been dropped or damaged, or dropped into water. Return the bed for ex-
amination and repair or replace it.
•(QVXUHVXLWDEOH&DEOHW\SHVDUHXVHG$FFHSWDEOH&DEOHW\SHVDUHGH¿QHGDVWKRVHIW
m) in length and that are at least as servicable as SP-2, SPE-2, SPT-2, SV, SVE or SVT types.
• Keep all Cables away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors.
•Do not operate the Bed Frame where aerosol (spray) products are being used or where ox-
ygen is being administered.
•
7RGLVFRQQHFWWKH%HG)UDPHWXUQDOOFRQWUROVWRWKHRႇSRVLWLRQWKHQUHPRYHSOXJIURPRXWOHW
• WARNING: Risk of injury – keep children away from the extended foot support (or other
similar parts).
• WARNING: Risk of electric shock –connect this furnishing to a properly grounded outlet only.
See Grounding Instructions.
RESIDUAL RISKS
Residual risks are the risks that remain after all relevant safety standards have been complied
with. These have been evaluated through a thorough risk assessment. Read all instructions be-
fore assembling and operating the Bed Frame.
07ADJUSTABLE BED FRAME - OWNER’S MANUAL //
WARNING
Moderate risk of death or serious injury
2SHQLQJHOHFWULFDOFRPSRQHQWVRUDWWHPSWLQJLPSURSHUFRQYHUVLRQVRUPRGL¿FDWLRQVWRHOHFWUL-
cal or mechanical components on the Bed Frame may lead to death or serious injury.
• Do not convert or modify the Adjustable Bed Frame
• Never open electrical components
WARNING
Moderate risk of death or serious injury through crushing
When the Bed Frame moves to a new position, it is possible that persons will be crushed be-
tween the Bed Frame and foreign objects.This may lead to death or serious injury.
• Do not store foreign objects underneath the Bed Frame
• Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
WARNING
Moderate risk of death or serious injury in explosive atmospheres
Operating the Adjustable Bed Frame in potentially explosive atmospheres may lead to death
or serious injury through explosions.
• Read the relevant directives to determine whether an atmosphere is potentially explosive
• Do not operate the Adjustable Bed Frame in potentially explosive atmospheres
WARNING
Moderate risk of death or serious injury to children
Misuse of the Bed Frame around children may lead to death or serious injury.
• Activate the Child Lock when children are present
• Keep children away from moving Platforms
• Do not allow children to play with the Bed Frame
SAVE THESE INSTRUCTIONS
WARNING
Moderate risk of death or serious injury through crushing
Crawling, laying, or reaching underneath the Bed Frame may lead to death or serious injury
through crushing.
• Do not crawl, lay, or reach underneath the Bed Frame
WARNING
5LVNRIHOHFWULFVKRFN¿UHDQGLQMXU\
Review the instructions to ensure the appropriate critical components and accessories are being
iused with the furnishing.
08
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
PREFACE
:LWKWKH$GMXVWDEOH%HG)UDPHHYHU\HႇRUWKDVEHHQPDGHWRHQVXUH\RXUFRPIRUWDQGVDIHW\
Each Bed Frame is rigorously tested to comply with all relevant safety standards and their re-
quirements.
This Owner’s Manual is intended to enable persons to assemble and operate the Bed Frame
safely. However, incorrect installation of the product, or usage outside of the intended use de-
scribed in this Owner’s Manual may lead to hazardous situations. In Chapter 1, “Safety”, and
throughout this Owner’s Manual, potential risks, their consequences, and steps to avoid harm
are explained.
Observing the safety instructions in this Owner’s Manual will help you to avoid hazards and min-
imize damage to the system. All persons involved in the assembly of the system must have the
full product documentation available to them at all times. Product documentation consists of this
Owner’s Manual and any other relevant documents supplied by the manufacturer. Documenta-
tion must always be kept complete and legible.
2. INTRODUCTION
LIABILITY
The descriptions of product characteristics in this Owner’s Manual are not a guarantee of the
presence of these characteristics. LOGICDATA is not liable for damage or injury caused by:
ƒImproper product use
ƒDisregard of the documentation
ƒUnauthorized product alterations
ƒImproper work on and with the Adjustable Bed Frame
ƒOperation of damaged products
ƒImproperly performed repairs
ƒUnauthorized changes to the operating parameters
ƒ'LVDVWHUVH[WHUQDOLQÀXHQFHDQGIRUFHPDMHXUH
/2*,&'$7$DVVXPHVQROLDELOLW\IRUWHFKQLFDORUSULQWLQJHUURUVIRUGH¿FLHQFLHVLQWKLVGRFX-
mentation, or for damages caused directly or indirectly by the delivery, performance, or usage
of this documentation.
Contact information can be found on page 2 of the Owner's Manual.
Visit www.adjustables.logicdata.net/customer-care for a full list of customer support
options.

07
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
WARNING
Moderate risk of death or serious injury
2SHQLQJHOHFWULFDOFRPSRQHQWVRUDWWHPSWLQJLPSURSHUFRQYHUVLRQVRUPRGL¿FDWLRQVWRHOHFWUL-
cal or mechanical components on the Bed Frame may lead to death or serious injury.
• Do not convert or modify the Adjustable Bed Frame
• Never open electrical components
WARNING
Moderate risk of death or serious injury through crushing
When the Bed Frame moves to a new position, it is possible that persons will be crushed be-
tween the Bed Frame and foreign objects.This may lead to death or serious injury.
• Do not store foreign objects underneath the Bed Frame
• Ensure nothing obstructs the Bed Frame’s range of motion (e.g. night stands or open windows)
WARNING
Moderate risk of death or serious injury in explosive atmospheres
Operating the Adjustable Bed Frame in potentially explosive atmospheres may lead to death
or serious injury through explosions.
• Read the relevant directives to determine whether an atmosphere is potentially explosive
• Do not operate the Adjustable Bed Frame in potentially explosive atmospheres
WARNING
Moderate risk of death or serious injury to children
Misuse of the Bed Frame around children may lead to death or serious injury.
• Activate the Child Lock when children are present
• Keep children away from moving Platforms
• Do not allow children to play with the Bed Frame
SAVE THESE INSTRUCTIONS
WARNING
Moderate risk of death or serious injury through crushing
Crawling, laying, or reaching underneath the Bed Frame may lead to death or serious injury
through crushing.
• Do not crawl, lay, or reach underneath the Bed Frame
WARNING
5LVNRIHOHFWULFVKRFN¿UHDQGLQMXU\
Review the instructions to ensure the appropriate critical components and accessories are being
iused with the furnishing.
08 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
PREFACE
:LWKWKH$GMXVWDEOH%HG)UDPHHYHU\HႇRUWKDVEHHQPDGHWRHQVXUH\RXUFRPIRUWDQGVDIHW\
Each Bed Frame is rigorously tested to comply with all relevant safety standards and their re-
quirements.
This Owner’s Manual is intended to enable persons to assemble and operate the Bed Frame
safely. However, incorrect installation of the product, or usage outside of the intended use de-
scribed in this Owner’s Manual may lead to hazardous situations. In Chapter 1, “Safety”, and
throughout this Owner’s Manual, potential risks, their consequences, and steps to avoid harm
are explained.
Observing the safety instructions in this Owner’s Manual will help you to avoid hazards and min-
imize damage to the system. All persons involved in the assembly of the system must have the
full product documentation available to them at all times. Product documentation consists of this
Owner’s Manual and any other relevant documents supplied by the manufacturer. Documenta-
tion must always be kept complete and legible.
2. INTRODUCTION
LIABILITY
The descriptions of product characteristics in this Owner’s Manual are not a guarantee of the
presence of these characteristics. LOGICDATA is not liable for damage or injury caused by:
ƒImproper product use
ƒDisregard of the documentation
ƒUnauthorized product alterations
ƒImproper work on and with the Adjustable Bed Frame
ƒOperation of damaged products
ƒImproperly performed repairs
ƒUnauthorized changes to the operating parameters
ƒ'LVDVWHUVH[WHUQDOLQÀXHQFHDQGIRUFHPDMHXUH
/2*,&'$7$DVVXPHVQROLDELOLW\IRUWHFKQLFDORUSULQWLQJHUURUVIRUGH¿FLHQFLHVLQWKLVGRFX-
mentation, or for damages caused directly or indirectly by the delivery, performance, or usage
of this documentation.
Contact information can be found on page 2 of the Owner's Manual.
Visit www.adjustables.logicdata.net/customer-care for a full list of customer support
options.
09
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
FCC STATEMENT
The Radio Frequency for this product is 2.4 GHz
FCC COMPLIANCE
The Adjustable Bed Frame complies with FCC CFR 47 Part 15 Subpart B/C. Operation is sub-
ject to the following conditions:
1. The product may not cause harmful interference
2. The product must accept any interference received, including interference that may
cause undesired operation
To comply with the FCC RF exposure compliance requirements, you may not make any changes
to the product or the antenna. Changes to the antenna or the product could result in the prod-
uct exceeding the RF exposure requirements. This may void your authority to use the product.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a double-insulated product requires
H[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGLVWREHGRQHRQO\E\TXDOL¿HGVHUYLFH
personnel. Replacement parts for a double-insulated product must be identical to the parts
they replace. A double-insulated product is marked with the words "DOUBLE INSULATION"
or "DOUBLE INSULATED." The symbol (square within a square) is also able to be
marked on the product.

08
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
PREFACE
:LWKWKH$GMXVWDEOH%HG)UDPHHYHU\HႇRUWKDVEHHQPDGHWRHQVXUH\RXUFRPIRUWDQGVDIHW\
Each Bed Frame is rigorously tested to comply with all relevant safety standards and their re-
quirements.
This Owner’s Manual is intended to enable persons to assemble and operate the Bed Frame
safely. However, incorrect installation of the product, or usage outside of the intended use de-
scribed in this Owner’s Manual may lead to hazardous situations. In Chapter 1, “Safety”, and
throughout this Owner’s Manual, potential risks, their consequences, and steps to avoid harm
are explained.
Observing the safety instructions in this Owner’s Manual will help you to avoid hazards and min-
imize damage to the system. All persons involved in the assembly of the system must have the
full product documentation available to them at all times. Product documentation consists of this
Owner’s Manual and any other relevant documents supplied by the manufacturer. Documenta-
tion must always be kept complete and legible.
2. INTRODUCTION
LIABILITY
The descriptions of product characteristics in this Owner’s Manual are not a guarantee of the
presence of these characteristics. LOGICDATA is not liable for damage or injury caused by:
ƒImproper product use
ƒDisregard of the documentation
ƒUnauthorized product alterations
ƒImproper work on and with the Adjustable Bed Frame
ƒOperation of damaged products
ƒImproperly performed repairs
ƒUnauthorized changes to the operating parameters
ƒ'LVDVWHUVH[WHUQDOLQÀXHQFHDQGIRUFHPDMHXUH
/2*,&'$7$DVVXPHVQROLDELOLW\IRUWHFKQLFDORUSULQWLQJHUURUVIRUGH¿FLHQFLHVLQWKLVGRFX-
mentation, or for damages caused directly or indirectly by the delivery, performance, or usage
of this documentation.
Contact information can be found on page 2 of the Owner's Manual.
Visit www.adjustables.logicdata.net/customer-care for a full list of customer support
options.
09ADJUSTABLE BED FRAME - OWNER’S MANUAL //
FCC STATEMENT
The Radio Frequency for this product is 2.4 GHz
FCC COMPLIANCE
The Adjustable Bed Frame complies with FCC CFR 47 Part 15 Subpart B/C. Operation is sub-
ject to the following conditions:
1. The product may not cause harmful interference
2. The product must accept any interference received, including interference that may
cause undesired operation
To comply with the FCC RF exposure compliance requirements, you may not make any changes
to the product or the antenna. Changes to the antenna or the product could result in the prod-
uct exceeding the RF exposure requirements. This may void your authority to use the product.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a double-insulated product requires
H[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGLVWREHGRQHRQO\E\TXDOL¿HGVHUYLFH
personnel. Replacement parts for a double-insulated product must be identical to the parts
they replace. A double-insulated product is marked with the words "DOUBLE INSULATION"
or "DOUBLE INSULATED." The symbol (square within a square) is also able to be
marked on the product.
10
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
The Adjustable Bed Frame is delivered in two boxes. The boxes contain all the parts and tools
necessary to fully assemble and operate the system. Upon opening the packaging, use this check-
list to ensure all the parts are present and in perfect condition. If any part is damaged or missing,
FRQWDFW/2*,&'$7$<RXFDQ¿QGWKHUHOHYDQWFRQWDFWGHWDLOVDWWKHEHJLQQLQJRIWKH2ZQHUV
0DQXDO(QVXUHWKDWWKHER[HVDUHVWRUHGLQDÀDWSRVLWLRQLQDGU\SODFHDWURRPWHPSHUDWXUH
3. BOX CONTENTS
ASIDE RAIL (RIGHT)
BSIDE RAIL (LEFT)
2x CROSSBAR
D
POWER CONVERTER
KI CONTROL BOX
POWER CABLES
J
4X CROSSBAR KNOB
E
C4x LEG
EMERGENCY LOWERING STRAP
YX SYNC CABLE

09
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
FCC STATEMENT
The Radio Frequency for this product is 2.4 GHz
FCC COMPLIANCE
The Adjustable Bed Frame complies with FCC CFR 47 Part 15 Subpart B/C. Operation is sub-
ject to the following conditions:
1. The product may not cause harmful interference
2. The product must accept any interference received, including interference that may
cause undesired operation
To comply with the FCC RF exposure compliance requirements, you may not make any changes
to the product or the antenna. Changes to the antenna or the product could result in the prod-
uct exceeding the RF exposure requirements. This may void your authority to use the product.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for
grounding to be added to the product. Servicing a double-insulated product requires
H[WUHPHFDUHDQGNQRZOHGJHRIWKHV\VWHPDQGLVWREHGRQHRQO\E\TXDOL¿HGVHUYLFH
personnel. Replacement parts for a double-insulated product must be identical to the parts
they replace. A double-insulated product is marked with the words "DOUBLE INSULATION"
or "DOUBLE INSULATED." The symbol (square within a square) is also able to be
marked on the product.
10 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
The Adjustable Bed Frame is delivered in two boxes. The boxes contain all the parts and tools
necessary to fully assemble and operate the system. Upon opening the packaging, use this check-
list to ensure all the parts are present and in perfect condition. If any part is damaged or missing,
FRQWDFW/2*,&'$7$<RXFDQ¿QGWKHUHOHYDQWFRQWDFWGHWDLOVDWWKHEHJLQQLQJRIWKH2ZQHUV
0DQXDO(QVXUHWKDWWKHER[HVDUHVWRUHGLQDÀDWSRVLWLRQLQDGU\SODFHDWURRPWHPSHUDWXUH
3. BOX CONTENTS
ASIDE RAIL (RIGHT)
BSIDE RAIL (LEFT)
2x CROSSBAR
D
POWER CONVERTER
K
ICONTROL BOX
POWER CABLES
J
4X CROSSBAR KNOB
E
C4x LEG
EMERGENCY LOWERING STRAP
Y
XSYNC CABLE
11
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
QUICK START GUIDE
OWNER'S MANUAL
REMOTE CONTROL
2x AAA BATTERIES
HEAD PLATFORM
BASE PLATFORM
F
H
16X PLATFORM SCREW O
NRETAINER BAR
LINNER PLATFORM
MFOOT PLATFORM
HEAD
BASE
INNER
FOOT
GINNER PLATFORM
INNER

10
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
The Adjustable Bed Frame is delivered in two boxes. The boxes contain all the parts and tools
necessary to fully assemble and operate the system. Upon opening the packaging, use this check-
list to ensure all the parts are present and in perfect condition. If any part is damaged or missing,
FRQWDFW/2*,&'$7$<RXFDQ¿QGWKHUHOHYDQWFRQWDFWGHWDLOVDWWKHEHJLQQLQJRIWKH2ZQHUV
0DQXDO(QVXUHWKDWWKHER[HVDUHVWRUHGLQDÀDWSRVLWLRQLQDGU\SODFHDWURRPWHPSHUDWXUH
3. BOX CONTENTS
ASIDE RAIL (RIGHT)
BSIDE RAIL (LEFT)
2x CROSSBAR
D
POWER CONVERTER
KI CONTROL BOX
POWER CABLES
J
4X CROSSBAR KNOB
E
C4x LEG
EMERGENCY LOWERING STRAP
YX SYNC CABLE
11ADJUSTABLE BED FRAME - OWNER’S MANUAL //
QUICK START GUIDE
OWNER'S MANUAL
REMOTE CONTROL
2x AAA BATTERIES
HEAD PLATFORM
BASE PLATFORM
F
H
16X PLATFORM SCREW O
NRETAINER BAR
LINNER PLATFORM
MFOOT PLATFORM
HEAD
BASE
INNER
FOOT
GINNER PLATFORM
INNER
12
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
TOOLS AND EQUIPMENT
The Adjustable Bed Frame should be assembled by two adults. If you assemble the Bed Frame
alone, be careful when lifting heavy parts. Ensure the assembly area is larger than the Bed
Frame. Follow the steps carefully to assemble the Bed Frame correctly.
UNPACKAGING
/D\WKHSDFNDJLQJÀDWRQWKHJURXQGHQVXULQJLWLVWKHULJKWZD\XSVHHQRWLFHVRQWKHSDFNDJLQJ
Carefully open the packaging and check its contents, as described in Chapter 3, “Box Contents”.
NOTICE
Do not use a knife or a sharp object to unpackage the Bed Frame. This may damage the product.
NOTICE
(QVXUHDOOSDUWVDUHDWURRPWHPSHUDWXUH3DUWVWKDWDUHWRRFROGRUKRWPD\DႇHFWDVVHPEO\
CAUTION
Risk of minor or moderate injury through cutting
Contact with sharp edges may lead to minor or moderate injury through cutting.
• Avoid contact with sharp edges
4. ASSEMBLY
WARNING
Moderate risk of death or serious injury to children and animals
7KHSODVWLFSDFNDJLQJRIWKH%HG)UDPHLVDSRWHQWLDOVXႇRFDWLRQKD]DUG/HDYLQJFKLOGUHQRU
DQLPDOVXQVXSHUYLVHGZLWKWKHHPSW\SDFNDJLQJPD\OHDGWRGHDWKWKURXJKVXႇRFDWLRQ
• Do not leave children or animals unsupervised
• Dispose of unnecessary packaging immediately
NOTICE
3ODFLQJWKHSDUWVGLUHFWO\RQWRDKDUGÀRRUPD\FDXVHGDPDJHWRWKHÀRRURUWKHSDUWVWKHPVHOYHV
• Use the cardboard packaging material to cushion the impact and avoid damage.

11
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
QUICK START GUIDE
OWNER'S MANUAL
REMOTE CONTROL
2x AAA BATTERIES
HEAD PLATFORM
BASE PLATFORM
F
H
16X PLATFORM SCREW O
NRETAINER BAR
LINNER PLATFORM
MFOOT PLATFORM
HEAD
BASE
INNER
FOOT
GINNER PLATFORM
INNER
12 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
TOOLS AND EQUIPMENT
The Adjustable Bed Frame should be assembled by two adults. If you assemble the Bed Frame
alone, be careful when lifting heavy parts. Ensure the assembly area is larger than the Bed
Frame. Follow the steps carefully to assemble the Bed Frame correctly.
UNPACKAGING
/D\WKHSDFNDJLQJÀDWRQWKHJURXQGHQVXULQJLWLVWKHULJKWZD\XSVHHQRWLFHVRQWKHSDFNDJLQJ
Carefully open the packaging and check its contents, as described in Chapter 3, “Box Contents”.
NOTICE
Do not use a knife or a sharp object to unpackage the Bed Frame. This may damage the product.
NOTICE
(QVXUHDOOSDUWVDUHDWURRPWHPSHUDWXUH3DUWVWKDWDUHWRRFROGRUKRWPD\DႇHFWDVVHPEO\
CAUTION
Risk of minor or moderate injury through cutting
Contact with sharp edges may lead to minor or moderate injury through cutting.
• Avoid contact with sharp edges
4. ASSEMBLY
WARNING
Moderate risk of death or serious injury to children and animals
7KHSODVWLFSDFNDJLQJRIWKH%HG)UDPHLVDSRWHQWLDOVXႇRFDWLRQKD]DUG/HDYLQJFKLOGUHQRU
DQLPDOVXQVXSHUYLVHGZLWKWKHHPSW\SDFNDJLQJPD\OHDGWRGHDWKWKURXJKVXႇRFDWLRQ
• Do not leave children or animals unsupervised
• Dispose of unnecessary packaging immediately
NOTICE
3ODFLQJWKHSDUWVGLUHFWO\RQWRDKDUGÀRRUPD\FDXVHGDPDJHWRWKHÀRRURUWKHSDUWVWKHPVHOYHV
• Use the cardboard packaging material to cushion the impact and avoid damage.

13ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 2: ATTACHING THE LEGS
1. 3RVLWLRQWKH¿UVW/HJ(C) below
the Side Rail (A/B) as shown in
the picture.
2.
Turn the Leg to screw it into
the Side Rail. It should be hand
tight.
3. Repeat Steps 1 and 2 to Screw
in the other 3 Legs.
A B
C
HEAD
FOOT
DO NOT REMOVE STRAPPING TAPE
USE LABELS ON SIDE RAILS
DO NOT REMOVE PROTECTIVE MATERIAL
STEP 1: PREPARING THE OUTER FRAME
WALL
Lay the Crossbars (D) and Side Rails (A,
B) on the ground, as shown in the picture.
IMPORTANT:
•
Ensure the Crossbars are parallel
and roughly 5 feet (150 cm) apart.
•Use the labels on the Side Rails to
ensure they are oriented correctly.
•
Use the Crossbars to determine
the position of the Side Rails. The
Side Rails should be the width of the
Crossbar apart.
D
B
A
14
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
STEP 3: CONNECTING THE BARS
1.
/LIWWKH ¿UVW &URVVEDU(D)
and place one end of it
into a slot on the Side Rail
(Right) (A).
Ensure the Thread on the
Side Rail (the metal part
facing upwards) passes
through the hole at the
end of the Crossbar.
2.
Place a Crossbar Knob (E)
onto the thread connect-
ing the Side Rail and the
Crossbar. Turn the Knob
counter-clockwise until it
is hand tight.
D
E
REMOVE STRAPPING TAPE
REMOVE PROTECTIVE MATERIAL
CAUTION
Risk of minor or moderate injury through crushing
The Side Rails are not secured while they are standing alone. If they fall over, this may lead to
minor or moderate injury through crushing.
• Do not attempt to stand the Side Rails upright before they are connected to the Crossbars
• Be careful not to knock over the Side Rails
• Ensure that you are wearing suitable footwear while assembling the Bed Frame
3. Repeat steps 1 and 2 for
the second Crossbar.
D
A

13
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 2: ATTACHING THE LEGS
1. 3RVLWLRQWKH¿UVW/HJ(C) below
the Side Rail (A/B) as shown in
the picture.
2.
Turn the Leg to screw it into
the Side Rail. It should be hand
tight.
3. Repeat Steps 1 and 2 to Screw
in the other 3 Legs.
A B
C
HEAD
FOOT
DO NOT REMOVE STRAPPING TAPE
USE LABELS ON SIDE RAILS
DO NOT REMOVE PROTECTIVE MATERIAL
STEP 1: PREPARING THE OUTER FRAME
WALL
Lay the Crossbars (D) and Side Rails (A,
B) on the ground, as shown in the picture.
IMPORTANT:
•
Ensure the Crossbars are parallel
and roughly 5 feet (150 cm) apart.
•Use the labels on the Side Rails to
ensure they are oriented correctly.
•
Use the Crossbars to determine
the position of the Side Rails. The
Side Rails should be the width of the
Crossbar apart.
D
B
A
14 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
STEP 3: CONNECTING THE BARS
1.
/LIWWKH ¿UVW &URVVEDU(D)
and place one end of it
into a slot on the Side Rail
(Right) (A).
Ensure the Thread on the
Side Rail (the metal part
facing upwards) passes
through the hole at the
end of the Crossbar.
2.
Place a Crossbar Knob (E)
onto the thread connect-
ing the Side Rail and the
Crossbar. Turn the Knob
counter-clockwise until it
is hand tight.
D
E
REMOVE STRAPPING TAPE
REMOVE PROTECTIVE MATERIAL
CAUTION
Risk of minor or moderate injury through crushing
The Side Rails are not secured while they are standing alone. If they fall over, this may lead to
minor or moderate injury through crushing.
• Do not attempt to stand the Side Rails upright before they are connected to the Crossbars
• Be careful not to knock over the Side Rails
• Ensure that you are wearing suitable footwear while assembling the Bed Frame
3. Repeat steps 1 and 2 for
the second Crossbar.
D
A
15
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 4: CONNECTING THE CABLES
1.
Insert the 4 Motor Cables
from the Side Rails (A, B) into
the Plug Ports on the Control
Box (I). Ensure that the color
of the Plug matches the color
of the Plug Port.
2.
Insert the Power Converter
Cable (J) into the Control
%R[/D\WKH&DEOHÀDWDORQJ
WKHÀRRUWRUHGXFHWKHULVNRI
tripping.
CAUTION
Risk of minor or moderate injury through crushing
While screwing in the Crossbar Knobs, you will need to lift the moving parts of the Side Rails.
Allowing these parts to fall may lead to minor or moderate injury through crushing.
• Ensure moving parts do not fall down during assembly
CAUTION
Risk of minor or moderate injury through crushing
*ULSSLQJWKH6LGH5DLOVPRYLQJSDUWVPD\OHDGWRPLQRURUPRGHUDWHLQMXU\WKURXJKFUXVKLQJ
•'RQRWWRXFKPRYLQJSDUWVZKHQOLIWLQJRUPRYLQJWKH6LGH5DLOV2QO\JULSWKH¿[HGSDUWV
AB
J
I
4. Connect the Crossbars (D)
to the Side Rail (Left) (B)
as shown in steps 1-3.
D
D
B
A
R

14
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
STEP 3: CONNECTING THE BARS
1.
/LIWWKH ¿UVW &URVVEDU(D)
and place one end of it
into a slot on the Side Rail
(Right) (A).
Ensure the Thread on the
Side Rail (the metal part
facing upwards) passes
through the hole at the
end of the Crossbar.
2.
Place a Crossbar Knob (E)
onto the thread connect-
ing the Side Rail and the
Crossbar. Turn the Knob
counter-clockwise until it
is hand tight.
D
E
REMOVE STRAPPING TAPE
REMOVE PROTECTIVE MATERIAL
CAUTION
Risk of minor or moderate injury through crushing
The Side Rails are not secured while they are standing alone. If they fall over, this may lead to
minor or moderate injury through crushing.
• Do not attempt to stand the Side Rails upright before they are connected to the Crossbars
• Be careful not to knock over the Side Rails
• Ensure that you are wearing suitable footwear while assembling the Bed Frame
3. Repeat steps 1 and 2 for
the second Crossbar.
D
A
15ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 4: CONNECTING THE CABLES
1.
Insert the 4 Motor Cables
from the Side Rails (A, B) into
the Plug Ports on the Control
Box (I). Ensure that the color
of the Plug matches the color
of the Plug Port.
2.
Insert the Power Converter
Cable (J) into the Control
%R[/D\WKH&DEOHÀDWDORQJ
WKHÀRRUWRUHGXFHWKHULVNRI
tripping.
CAUTION
Risk of minor or moderate injury through crushing
While screwing in the Crossbar Knobs, you will need to lift the moving parts of the Side Rails.
Allowing these parts to fall may lead to minor or moderate injury through crushing.
• Ensure moving parts do not fall down during assembly
CAUTION
Risk of minor or moderate injury through crushing
*ULSSLQJWKH6LGH5DLOVPRYLQJSDUWVPD\OHDGWRPLQRURUPRGHUDWHLQMXU\WKURXJKFUXVKLQJ
•'RQRWWRXFKPRYLQJSDUWVZKHQOLIWLQJRUPRYLQJWKH6LGH5DLOV2QO\JULSWKH¿[HGSDUWV
AB
J
I
4. Connect the Crossbars (D)
to the Side Rail (Left) (B)
as shown in steps 1-3.
D
D
B
A
R
16
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
1.
Turn over the Base Plat-
form (H) DQG OD\ LW ÀDW
across the center of the
Bed Frame. The Net
should face downwards.
2.
Ensure that the Platform
is correctly positioned.
There should be 2 Mount-
ing Holes on each Side
Rail (A, B) either side of
the Platform.
3. Use 4 Platform Screws (N)
WR¿[WKH3ODWIRUPE\KDQG
Turn each screw until it is
hand-tight.
H
A
B
N
STEP 5: MOUNTING THE BASE PLATFORM
1.
Lay the Base Platform
(H) upside down across
the Bed Frame. The Net
should face upwards.
2.
Lay the Control Box (I) in
-
side the Net on the Base
Platform.
H
I
BASE
4x
CAUTION
Risk of minor or moderate injury through tripping
While mounting the Platforms, you may have to step over the Power Cable. Tripping over the
Cable may lead to injury.
• Be careful not to trip over the Cable

15
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 4: CONNECTING THE CABLES
1.
Insert the 4 Motor Cables
from the Side Rails (A, B) into
the Plug Ports on the Control
Box (I). Ensure that the color
of the Plug matches the color
of the Plug Port.
2.
Insert the Power Converter
Cable (J) into the Control
%R[/D\WKH&DEOHÀDWDORQJ
WKHÀRRUWRUHGXFHWKHULVNRI
tripping.
CAUTION
Risk of minor or moderate injury through crushing
While screwing in the Crossbar Knobs, you will need to lift the moving parts of the Side Rails.
Allowing these parts to fall may lead to minor or moderate injury through crushing.
• Ensure moving parts do not fall down during assembly
CAUTION
Risk of minor or moderate injury through crushing
*ULSSLQJWKH6LGH5DLOVPRYLQJSDUWVPD\OHDGWRPLQRURUPRGHUDWHLQMXU\WKURXJKFUXVKLQJ
•'RQRWWRXFKPRYLQJSDUWVZKHQOLIWLQJRUPRYLQJWKH6LGH5DLOV2QO\JULSWKH¿[HGSDUWV
AB
J
I
4. Connect the Crossbars (D)
to the Side Rail (Left) (B)
as shown in steps 1-3.
D
D
B
A
R
16 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
1.
Turn over the Base Plat-
form (H) DQG OD\ LW ÀDW
across the center of the
Bed Frame. The Net
should face downwards.
2.
Ensure that the Platform
is correctly positioned.
There should be 2 Mount-
ing Holes on each Side
Rail (A, B) either side of
the Platform.
3. Use 4 Platform Screws (N)
WR¿[WKH3ODWIRUPE\KDQG
Turn each screw until it is
hand-tight.
H
A
B
N
STEP 5: MOUNTING THE BASE PLATFORM
1.
Lay the Base Platform
(H) upside down across
the Bed Frame. The Net
should face upwards.
2.
Lay the Control Box (I) in
-
side the Net on the Base
Platform.
H
I
BASE
4x
CAUTION
Risk of minor or moderate injury through tripping
While mounting the Platforms, you may have to step over the Power Cable. Tripping over the
Cable may lead to injury.
• Be careful not to trip over the Cable
17
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 7: ATTACHING THE RETAINER BAR
1.
Move the Retainer
Bar (O) into position.
The two ends of the
Bar should be inside
the Brackets at the
end of the Foot Plat-
form (M).
2.
Press the Retainer
Bar (O) ¿UPO\ WR-
wards the Bed Frame
to click it into place.
1. Use 4 Platform Screws
(N) to attach the nar-
rower, Inner Platforms
(G, L) to the Side Rails
on either side of the
Base Platform.
2. Lay the Head and Foot
Platforms (F, M) in po-
sition on the Side Rails.
3. 8VHWKH¿QDO3ODWIRUP
screws (N) to attach the
Head and Foot Plat-
forms to the Side Rails.
(A, B).
STEP 6: MOUNTING THE OTHER PLATFORMS
M
O
IMPORTANT:
• Use the labels on the Side Rails (A, B) to ensure the Platforms are at the right end.
•Ensure the the Platforms are oriented correctly. The curved edges should face outwards and the Brack-
ets for the Retainer Bar should face downwards.
INNER
FOOT
HEAD
G
L
N
M
F
H
12x
USE LABELS ON SIDE RAILS AND PLATFORMS

16
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
1.
Turn over the Base Plat-
form (H) DQG OD\ LW ÀDW
across the center of the
Bed Frame. The Net
should face downwards.
2.
Ensure that the Platform
is correctly positioned.
There should be 2 Mount-
ing Holes on each Side
Rail (A, B) either side of
the Platform.
3. Use 4 Platform Screws (N)
WR¿[WKH3ODWIRUPE\KDQG
Turn each screw until it is
hand-tight.
H
A
B
N
STEP 5: MOUNTING THE BASE PLATFORM
1.
Lay the Base Platform
(H) upside down across
the Bed Frame. The Net
should face upwards.
2.
Lay the Control Box (I) in
-
side the Net on the Base
Platform.
H
I
BASE
4x
CAUTION
Risk of minor or moderate injury through tripping
While mounting the Platforms, you may have to step over the Power Cable. Tripping over the
Cable may lead to injury.
• Be careful not to trip over the Cable
17ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 7: ATTACHING THE RETAINER BAR
1.
Move the Retainer
Bar (O) into position.
The two ends of the
Bar should be inside
the Brackets at the
end of the Foot Plat-
form (M).
2.
Press the Retainer
Bar (O) ¿UPO\ WR-
wards the Bed Frame
to click it into place.
1. Use 4 Platform Screws
(N) to attach the nar-
rower, Inner Platforms
(G, L) to the Side Rails
on either side of the
Base Platform.
2. Lay the Head and Foot
Platforms (F, M) in po-
sition on the Side Rails.
3. 8VHWKH¿QDO3ODWIRUP
screws (N) to attach the
Head and Foot Plat-
forms to the Side Rails.
(A, B).
STEP 6: MOUNTING THE OTHER PLATFORMS
M
O
IMPORTANT:
• Use the labels on the Side Rails (A, B) to ensure the Platforms are at the right end.
•Ensure the the Platforms are oriented correctly. The curved edges should face outwards and the Brack-
ets for the Retainer Bar should face downwards.
INNER
FOOT
HEAD
G
L
N
M
F
H
12x
USE LABELS ON SIDE RAILS AND PLATFORMS
18
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid
damage to the Bed Frame and the wall, ensure a small distance is kept.
STEP 8: CONNECTING THE POWER CABLE
NOTICE
Stretching the Power Cable may damage it. This may lead to malfunctions with the Bed Frame.
1.
Connect the Power Cable from
the Control Box to the cable
of the Power Converter (J).
2. Connect the second Power Ca-
ble to the Power Converter, then
to the mains.
3. Lay the Power Cable along the
wall behind the Bed Frame to
minimize the risk of tripping.
NOTICE
Ensure the Cable is plugged into the mains properly. Bad connections can damage the system.
1
2

17
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 7: ATTACHING THE RETAINER BAR
1.
Move the Retainer
Bar (O) into position.
The two ends of the
Bar should be inside
the Brackets at the
end of the Foot Plat-
form (M).
2.
Press the Retainer
Bar (O) ¿UPO\ WR-
wards the Bed Frame
to click it into place.
1. Use 4 Platform Screws
(N) to attach the nar-
rower, Inner Platforms
(G, L) to the Side Rails
on either side of the
Base Platform.
2. Lay the Head and Foot
Platforms (F, M) in po-
sition on the Side Rails.
3. 8VHWKH¿QDO3ODWIRUP
screws (N) to attach the
Head and Foot Plat-
forms to the Side Rails.
(A, B).
STEP 6: MOUNTING THE OTHER PLATFORMS
M
O
IMPORTANT:
• Use the labels on the Side Rails (A, B) to ensure the Platforms are at the right end.
•Ensure the the Platforms are oriented correctly. The curved edges should face outwards and the Brack-
ets for the Retainer Bar should face downwards.
INNER
FOOT
HEAD
G
L
N
M
F
H
12x
USE LABELS ON SIDE RAILS AND PLATFORMS
18 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid
damage to the Bed Frame and the wall, ensure a small distance is kept.
STEP 8: CONNECTING THE POWER CABLE
NOTICE
Stretching the Power Cable may damage it. This may lead to malfunctions with the Bed Frame.
1.
Connect the Power Cable from
the Control Box to the cable
of the Power Converter (J).
2. Connect the second Power Ca-
ble to the Power Converter, then
to the mains.
3. Lay the Power Cable along the
wall behind the Bed Frame to
minimize the risk of tripping.
NOTICE
Ensure the Cable is plugged into the mains properly. Bad connections can damage the system.
1
2
19
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 9: INSERTING THE BATTERIES
NOTICE
Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries.
Insert two 1,5V AAA batteries into the Re-
mote Control and slide the cover into posi-
tion. The batteries are provided for you.

18
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
NOTICE
If the Bed Frame is too close to the wall (or touching it), it may collide during movement. To avoid
damage to the Bed Frame and the wall, ensure a small distance is kept.
STEP 8: CONNECTING THE POWER CABLE
NOTICE
Stretching the Power Cable may damage it. This may lead to malfunctions with the Bed Frame.
1.
Connect the Power Cable from
the Control Box to the cable
of the Power Converter (J).
2. Connect the second Power Ca-
ble to the Power Converter, then
to the mains.
3. Lay the Power Cable along the
wall behind the Bed Frame to
minimize the risk of tripping.
NOTICE
Ensure the Cable is plugged into the mains properly. Bad connections can damage the system.
1
2
19ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 9: INSERTING THE BATTERIES
NOTICE
Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries.
Insert two 1,5V AAA batteries into the Re-
mote Control and slide the cover into posi-
tion. The batteries are provided for you.
20
//ADJUSTABLE BED FRAME - OWNER’S MANUAL
Head Platform and Foot Platform UP/DOWN Buttons
Move the Head and Foot Platforms up and down.
Sleeping Position Button
0RYHVWKH%HG)UDPHWRDÀDWSRVLWLRQ
Memory Position Buttons
Move the Bed Frame to a saved Memory Position.
5. OPERATION
REMOTE CONTROL
Each Adjustable Bed Frame is supplied with a Remote Control. Your Remote Control allows you
to operate the Bed Frame from a distance of 16 feet (5 m). The Remote Control supplied with your
product depends on the model you have ordered. Your Remote Control may include the following:
NOTE: The Remote Control supplied with your product may vary.
NOTICE
Pressing too many Buttons in a short space of time can cause damage to the system.
• :DLWRQHVHFRQGEHWZHHQSUHVVLQJGLႇHUHQW%XWWRQV
CAUTION
Risk of minor or moderate injury to children
Misuse of the Remote Control by children could lead to minor or moderate injury.
• Activate the Child Lock when children are present
• In Sync Mode, ensure the Child Lock feature is activated on both Remote Controls
• Do not allow children to play with the Remote Control
CAUTION
Risk of minor or moderate injury
Multiple Bed Frames may be in range of your Remote Control. Operating the wrong Bed
Frame may lead to minor or moderate injury.
• Ensure the Remote Control is paired to the correct Bed Frame
• Ensure the Remote Control has been safely unpaired before using it on another Bed Frame

19
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
STEP 9: INSERTING THE BATTERIES
NOTICE
Replace the batteries in the Remote Control once a year. Do not use rechargeable batteries.
Insert two 1,5V AAA batteries into the Re-
mote Control and slide the cover into posi-
tion. The batteries are provided for you.
20 //ADJUSTABLE BED FRAME - OWNER’S MANUAL
Head Platform and Foot Platform UP/DOWN Buttons
Move the Head and Foot Platforms up and down.
Sleeping Position Button
0RYHVWKH%HG)UDPHWRDÀDWSRVLWLRQ
Memory Position Buttons
Move the Bed Frame to a saved Memory Position.
5. OPERATION
REMOTE CONTROL
Each Adjustable Bed Frame is supplied with a Remote Control. Your Remote Control allows you
to operate the Bed Frame from a distance of 16 feet (5 m). The Remote Control supplied with your
product depends on the model you have ordered. Your Remote Control may include the following:
NOTE: The Remote Control supplied with your product may vary.
NOTICE
Pressing too many Buttons in a short space of time can cause damage to the system.
• :DLWRQHVHFRQGEHWZHHQSUHVVLQJGLႇHUHQW%XWWRQV
CAUTION
Risk of minor or moderate injury to children
Misuse of the Remote Control by children could lead to minor or moderate injury.
• Activate the Child Lock when children are present
• In Sync Mode, ensure the Child Lock feature is activated on both Remote Controls
• Do not allow children to play with the Remote Control
CAUTION
Risk of minor or moderate injury
Multiple Bed Frames may be in range of your Remote Control. Operating the wrong Bed
Frame may lead to minor or moderate injury.
• Ensure the Remote Control is paired to the correct Bed Frame
• Ensure the Remote Control has been safely unpaired before using it on another Bed Frame
21
ADJUSTABLE BED FRAME - OWNER’S MANUAL //
MOVING THE BED FRAME UP AND DOWN
1. Press and hold the UP or DOWN Button for the Platform you wish to adjust
2. Wait until the Bed Frame has reached the desired position
3. Release the UP or DOWN Button
The Bed Frame will move until the Button is released or the highest / lowest position is reached.
SAVING A MEMORY POSITION
There are two pre-saved Memory Positions: Anti-Snore (Position 1) and Zero Gravity (Position
2). Press the Memory Position Buttons on the Remote Control to move to these positions. You
can change saved Memory Positions to new Memory Positions. To do this, proceed as follows:
1. Press and hold the UP or DOWN Button for the Platform you wish to adjust
2. Wait until the Bed Frame has reached the desired position
3. Release the UP or DOWN Button
4. Press and hold the Button for the new Memory Position for at least 3 seconds
WRVDYHWKHSRVLWLRQ7KH&RQWURO%R[ZLOOFOLFNWZLFHWRFRQ¿P
5. Release the Memory Position Button.
PAIRING THE REMOTE CONTROL
You must pair the Bed Frame to a Remote Control before operation. Ensure the Bed Frame has
been unplugged for at least 10 seconds, then proceed as follows:
1. Plug the Bed Frame into the mains. This will automatically switch it to Pairing Mode for 30
minutes. In this time, the Bed Frame will search for Remote Controls to be paired with.
2. During Pairing Mode, press and release any Button. This will pair the Remote Control to
the Bed Frame.
UNPAIRING THE REMOTE CONTROL
1. Press and hold the Head UP and Foot DOWN Buttons for at least 10 seconds.
2. 7KH5HPRWH&RQWUROZLOOÀDVKWLPHV
3. Test the Remote Control to check that it has been safely unpaired.
REFERENCE DRIVE
%HIRUHXVLQJWKH%HG)UDPHIRUWKH¿UVWWLPH\RXPXVWSHUIRUPDUHIHUHQFHGULYH:KHQWKH
GULYHLVLQLWLDWHGWKHORZHUVHFWLRQRIWKHEHGZLOOPRYH¿UVWIROORZHGE\WKHXSSHUVHFWLRQ
1. Press and hold the Head UP/DOWN, Foot UP/DOWN or Sleeping Position Button. The
lower part of the Bed Frame will begin the reference drive. It will reach a lower limit and
then move up slightly. Do not release the button.
2. Continuing to hold the button, wait for the upper part of the frame to complete the drive.
3. Release the button and use the Bed Frame according to the instructions.
If the drive is interrupted, pressing any movement button restarts downward movement.
Table of contents
Other LOGICDATA Indoor Furnishing manuals
Popular Indoor Furnishing manuals by other brands

Sanus
Sanus BFV145 Assembling instructions

NewAge Products
NewAge Products PRO 3.0 Series installation guide

Alice's Home
Alice's Home NOAH IBSAJFULL manual

Better Homes and Gardens
Better Homes and Gardens C015104WE manual

Furniture of America
Furniture of America Roanne FOA7927D Assembly instructions

Next
Next 903635 Assembly instructions

Manhattan Comfort
Manhattan Comfort 27900 Assembly instructions

Wenger
Wenger Gearboss Rival installation instructions

COTTA
COTTA NALA 140x200 Assembly instructions

JWA
JWA HARDING 74704 Assembly instruction

Lifely
Lifely Mia Series Assemble instructions

real living
real living KYW-11390B Assembly instructions