Lola&Lykke TJ-CJ-MBB-S User manual

INSTRUCTIONS FOR USE
Lola&Lykke® Core Relief Pregnancy Support Belt
Lola&Lykke Oy
Konepajankuja 1
00510 Helsinki
Finland
see packaging
WellkangLtd(www.CE-marking.eu)
16 Castle St, Dover, CT16 1PW, UK

Please observe and retain the instructions for use and the packaging.
Made in China
Dear Customer, thank you for choosing our support belt!
The instructions for use should help you to get the best use out of
your product. Please read the instruction manual carefully - particu-
larly the “Usage and safety instructions” - before using this product
for the first time. You can download the Instructions for Use from our
website, at www.lolalykke.com. We will be glad to answer any ques-
tions and to receive any suggestions you might have.
Your Lola&Lykke team
Instructions for use
Lola&Lykke®Core Relief Pregnancy Support Belt

FIELD OF APPLICATION
These instructions for use apply to the following products:
TJ-CJ-MBB-S - Lola&Lykke support belt, size S
TJ-CJ-MBB-M - Lola&Lykke support belt, size M
TJ-CJ-MBB-L - Lola&Lykke support belt, size L
TJ-CJ-MBB-XL - Lola&Lykke support belt, size XL
PRODUCT CONTENT
1 Lola&Lykke support belt in the selected size (S, M, L, or XL)
1 Hot/Cold Therapy Pack
1 instruction manual
PURPOSE AND INTENDED USE
The Lola&Lykke Core Relief support belt is an orthopaedic belt, con-
sisting of a belt with fully adjustable hook and loop fastener, elastic
compression straps as well as stabilising back rods. The belt is de-
signed for short-term use around the hips and lower back. It is intend-
ed to be worn by women during pregnancy to ease pain in the back,
hips, or pelvic girdle and to take the weight of the baby belly.
AREAS OF APPLICATION
The Lola&Lykke support belt is for expectant mothers with back pain
or pelvic girdle pain.
FUNCTIONALITY
The Lola&Lykke support belt supports the stomach and alleviates back
pain by taking some of the burden off the muscles of the back and
pelvic floor. The fully adjustable hook and loop fastener means that
you can adjust the belt to suit individual requirements. This means
that the support belt can be worn throughout the entire pregnancy.
Using the two additional elastic straps, the supportive effect can be
adjusted to fit personal requirements for comfort and stability.

USER INSTRUCTIONS
It is important that you use the right size of Lola&Lykke support belt
and that it is positioned correctly, to achieve the best level of support.
The graphics and product images on the packaging indicate the cor-
rect sizing and the correct positioning of the belt. When doing this, fol-
low these steps:
1. Open the support belt by undoing the hook and loop fastener.
2. Place the belt with the large surface level with the lower back and
fasten the belt by putting the right side over the left side under the
stomach.
3. Fasten the hook and loop around the waist, under your belly, so that
it feels comfortable.
4. Take both elastic bands into your hands simultaneously and tight-
en them as evenly as possible, so that there are no folds in the fabric
that could cause a pressure sensation.
5. Fix the elastic straps onto the loop strips, to give you a pleasant sup-
portive effect.
6. If you feel that the support belt is too tight or too loose, repeat steps
1 - 5 and change the tension of the elastic straps. There is an appli-
cation video on our website to show you how to position the belt
correctly.

SAFETY INSTRUCTIONS
The support belt should only be worn when standing or walking and
not during breaks, when carrying out sedentary tasks or when sleep-
ing. If, while wearing the belt, you should start to feel unwell (dizziness,
high pressure) then please undo the support belt immediately.
Side effects could include skin irritation such as redness, swelling or
itching due to a build-up of heat in the area of the support belt. If this
happens, take off the support belt immediately.
The support belt must not be worn if you have open wounds in the
stomach, pelvic and back area. Before use, check the support belt to
make sure that it is intact. Do not use the support belt if, for example,
the rods on the back are sticking out, to avoid any risk of injury.
If the belt is pressing too hard or slips, then you might need a different
size. See the measurement chart/sizing on the packaging.
In case of a known hypersensitivity and allergic reactions to one of the
material components mentioned, you should stop using the support
belt or only use it after having consulted your physician.
If the symptoms persist or worsen, please seek advice from a doctor.
All serious incidents occurring in connection with this product must be
reported to the manufacturer immediately.

SAFEKEEPING, SERVICE LIFE, STORAGE, AND TRANSPORT
With normal usage, the product should be replaced after 3 years.
CLEANING AND DISPOSAL INSTRUCTIONS
The Lola&Lykke support belt is only suitable for hand wash and should
be dried in open air without wringing or twisting. To prevent damage
to the support belt, the use of chemical cleaning agents and ironing
the support belt is not recommended. Please observe the cleaning
and care instructions on the product to increase the service life of your
belt. The Lola&Lykke support belt can be disposed of along with the
household waste. Please observe the regional disposal regulations in
the process.
MATERIAL COMPOSITION
The Lola&Lykke pregnancy support belts are composed of:
Shell: 95% Bamboo 5% Spandex
Core: 40% Polyester 40% Nylon 20% Neoprene
Reinforced back support with two vertical ribs (PP)
EXPLANATIONS OF THE SYMBOLS USED
Manufacturer
Hand wash
Do not dry
Observe instructions for use
Batch number
Medical Device
Caution!
Do not iron

Lola&Lykke Oy
Konepajankuja 1
00510 Helsinki
Finland

For questions, please contact: [e-mail]