Lomography DigitaLIZA+ User manual

Manuals

CONTENT LIST
Instructions for Use 3
Gebrauchsanweisung 17
Intrucciones de Uso 31
Mode d'emploi 45
Istruzioni Per l'Uso 59
Instruções para Utilização 73
 87
󱾫󳨵󸒂󴁨󴇦 101
󻸛󼐘󻺓󻟴󻺋 115
󱡋󵫞󸑽󴁨 129
󱡋󵫞󸛚󴁨 143
คำ�แนะนำ�สำ�หรับก�รใช้ง�น 

English
Well, hello there! It's time to meet the exceedingly exciting,
compact, versatile, readymade and modular solution for film
scanning at home or on the go! For your ultimate scanning
satisfaction, the DigitaLIZA+ is at your service for creating
scans with your digital camera whilst the DigitaLIZA Max
also includes a smartphone stand so that you can scan away
to your heart's content with either your digital camera or
smartphone – how about that!?
Each system gives you total control over scanning your
35 mm or 120 film formats and you can even scan special
formats – sprockets, panoramas, overlapping exposures –
you name it, give it a go and see what happens! Magnet
technology holds your negatives perfectly flat and the
handy advancing knob mechanism helps to make the process
smooth, fast and completely fuss-free!
Read the following manual to get to grips with film scanning
using your DigitaLIZA+ or DigitaLIZA Max and prepare for
exciting times ahead!

4
[A] 35 mm Film Holder
[A1] Film Loading Knob
[A2] Film Loading Slot
[A3] Film Ejection Slot
[A4] Removable Spirit Level
[B] Backlight Panel with built-in 120 Film Holder
[B1] 120 Film Holder Cover
[B2] Backlight On/Off Switch
[B3] Backlight Panel
[B4] Micro-USB Socket
[B5] Battery Door
[B6] Battery Chamber
[B7] 127 Film Mask
[B8] 36 × 24 mm Film Mask
[B9] 35 mm Panoramic Diffuser
Components included in both the DigitaLIZA+ and DigitaLIZA Max packaging

5
COMPONENTS DIGITALIZA+
[B5]
[B6]
[B1]
[B3]
[B2]
[B4]
[B7]
[B8]
[B9]
[A4]
[A2]
[A1]
[A3]

6
[C]Smartphone Stand
[C1] Base Plate
[C2] Base Plate Slider
[C3] Smartphone Column Screw
[C4] Smartphone Column Slot
[C5] Smartphone Holder Column
[C6] Smartphone Clamp
[C7] Smartphone Clamp Screw
[C8] Smartphone Clamp Knob
Additional components included in the DigitaLIZA Max packaging only

7
COMPONENTS DIGITALIZA MAX
[C6]
[B8]
[B9]
[B7]
[B4]
[B2]
[B1]
[B3]
[A4]
[A2]
[A3][A1]
[A5]
[A6]
[C1]
[C2]
[C4] [C3]
[C8]
[C6]
[C5]
[C7]

8
MANUAL STEPS
BEFORE USING
Installing batteries into the Backlight Panel with Built-in 120 Film Holder [B]
1. Slide the Battery Door [B5] open.
2. Insert 2 × AA batteries into the Battery Chamber [B6].
3. Close the Battery Door [B5] by sliding it back into place.
Using the Backlight Panel with Built-in 120 Film Holder [B] with a micro-USB
power supply
1. Plug a standard micro-USB cable into the Micro-USB Socket [B4] on the
Backlight Panel with Built-in 120 Film Holder [B].
2. Plug the standard micro-USB cable into a USB power supply (adapter or
power bank).

9
MANUAL STEPS - HOW TO USE
LOADING FILM INTO THE 35MM FILM HOLDER [A]
1. Put the 35 mm film tongue into the Film Loading Slot [A2], with the emul-
sion side facing down on the 35 mm Film Holder [A].
2. Hold the 35 mm film and turn the Film Loading Knob [A1] clockwise, the
film will then be loaded into the 35 mm Film Holder [A] and will come out
via the Film Ejection Slot [A3].
3. Turn the Film Loading Knob [A1] back and forth to adjust the frame position
of the film inside the 35 mm Film Holder [A].
4. You may insert the 36 × 24 mm Film Mask [B8] on top of the Backlight
Panel [B3] to cover any unwanted areas or perforations of the 35 mm film
if needed, and achieve a faster scanning process for each standard 35 mm
frame.
5. If you are scanning panoramic frames, such as photos taken with a Sprocket
Rocket camera, endless panoramas or overlapping exposures; you should insert
the 35 mm Panoramic Diffuser [B9] on top of the Backlight Panel [B3]
to ensure that the frame is evenly lit. When not in use, remove the 35 mm
Panoramic Diffuser [B9] by opening the 120 Film Holder Cover [B1]

10
LOADING FILM INTO THE 120 FILM HOLDER [B]
1. Open the 120 Film Holder Cover [B1] on the Backlight Panel with Built-in
120 Film Holder [B].
2. Remove the 35 mm Panoramic Diffuser [B9] located on top of the Back-
light Panel [B3].
3. Insert the 120 film into the Backlight Panel with Built-in 120 Film Holder [B]
with the emulsion side facing down and close the 120 Film Holder Cover [B1]
to hold the film in place.
4. To adjust the position of the film frame, repeat steps 1-3.