Figure 1 –Equipment required for the firmware update
Before updating the firmware of the Lorgar Trix-510 Gamepad and wireless adapter, do the
following:
1. Turn on the computer and check the operating system version. Firmware update can be
performed with a Windows version 10/11 operating system only. The update cannot be
performed using other versions of Windows, as well as other operating systems (Linux,
macOS, etc.).
2. If the gamepad is already in use, skip to step 6 below.
3. If the gamepad is newly purchased and/or has not yet been used, remove it and its
accessories from the box.
4. Remove all packing materials from the gamepad and accessories.
5. Make sure that the gamepad and accessories do not have any external defects (significant
damage to the casing, buttons, cable integrity, etc.).
6. Turn on the gamepad and check that it is working properly.
7. Verify that the firmware needs to be updated (see “Introduction” section).
8. Prepare the cable and wireless adapter.
9. Fully charge the gamepad battery.
10. Download the latest firmware version for the gamepad and wireless adapter at
lorgar.com/drivers-and-manuals. To do this, do the following:
•Go to lorgar.com/drivers-and-manuals.
•In the search box, type in the device model: “LRG-GP510”. The “TRIX-510” device
should be displayed.
•In the “Drivers” section, locate the firmware file. The latest firmware version number will
be indicated at the end of the file name.
•Click “Download”.
1.2 Description of the Process and Warnings
Firmware update is the process of automatically rewriting firmware code to resolve firmware
issues in devices.
