7/ 12
7/ 12
7.1 Mode 1: Clock type
Command: MODE,1,T1,T2,T3,T4,T5,D#, T1~T5 mean the time during day
under 24-hour format, D means current report lasting duration in days. Up
to 5 time could be set up; device power on for 3 minutes maximum each
time wake up, power off after 1 location reported.
Sample:
1 location per day at 08:16: MODE,1,0816,1#
2 locations in 3 days 08:16, 18:16: MODE,1,0816,1816,3#
7.2 Mode 2: Tracking mode
Command: MODE,2,T1#, T1 means the time interval to report location, in
seconds, range from 5~999. Under this mode, device keeps online and turn
on GPS location when moving, turn off GPS location when static.
7.3 Mode 21: Smart clock mode
Command: MODE,21,T1,T2,T3,T4,T5#, T1~T5 mean the time during day
under 24-hour format. It reports GPS location in Mode 2: Tracking mode
interval when moving, but auto wakes up to report in clock time pre-set.
Sample:
MODE,2,60#
MODE,21,0800,1800#
7.4 Mode 3: Cycle mode
Command: MODE,3,T#, T is in minutes, ranges from 5 to 1440. Device
power on for 3 minutes maximum each time wake up, power off after
location reported.
Sample:
Every 3 hours report 1 GPS location: MODE,3,180#
7.5 Mode 23: Smart cycle mode
Command: MODE,23,T#, T is in minutes, ranges from 5 to 1440. It reports
GPS location in Mode 2: Tracking mode interval when moving, but auto
wakes up to report in cycle time pre-set.
Sample:
MODE,2,60#
MODE,23,180#
8. Common command list
