Lowrance SIMRAD StructureScan 3D User manual

204 mm (8.03")
169 mm (6.63")
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V 3A NET-2
91 mm
(3.58")
180 mm
(7.09")
57 mm (2.24")
207 mm
(8.15")
183 mm (7.20")
Dimensions
MountingParts included
DESCRIPTION
1StructureScan® 3D module
2Installation screws
3Ethernet cable, 4 m (15 ft)
4Power cable, 2 m (6.6 ft)
5Fuse and Fuse holder
6StructureScan® 3D Transducer (Optional)
StructureScan®3D
Installation Guide
For technical specications and
declarations, refer to the product
website on:
*988-10970-001*
simrad-yachting.com
lowrance.com
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
1 2 3 4 5 6

TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
Power
Connectors and LEDs
Wiring example
Transducer connection
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
Switch
12 / 24 V DC
+_
Red
Black
Yellow
Blue
(n/c)
Blue
(n/c) Blue
(n/c)
Red
Black
Yellow Red
Black
Yellow
+_
Power
Control bus
To Multi-Function
Display
12 / 24 V DC
1
2
3 3
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V3A
NET-2
ID CONNECTORS LEDs
1Ethernet OFF No connection
ON/FLASHING - Green Connected and ok
2Power
OFF No power
ON - Red System starting
ON - Green System operating
FLASHING Red/Green Software error - restart
unit
3Structure Scan
3D transducer
OFF Sounder not operating
FLASHING (every second) -
Green
Searching for bottom
signal
ON Operational system with
bottom signal detected
Power controlled by External Switch Power controlled by Multi-Function Display
12/24 V DCStructureScan® 3D Module
StructureScan® 3D Transducer
StructureScan® 3D Transducer cable 1
to
Transducer 1 Connector
StructureScan® 3D Transducer cable 2
to
Transducer 2 Connector
4G Radar
Multi-Function Displays
TRANSDUCER1 TRANSDUCER2
NET-3NET-1POWER
12V/24V 3A
NET-2
Ensure both StructureScan® 3D transducer cables
are connected to the StructureScan® 3D Module correctly