3. The height adjustment switch is a curly cable whose switch may be mounted
at a convenient place on the side of the screen or the wall wherever suitable,
bearing in mind to keep out of reach of children or unauthorized persons.
The Velcro provided in this kit may be used for this purpose.
Important
The Hi-Lo Screen Lift is an electrically powered height adjustable trolley for the mounting of Plasma, LED and LCD
display screens.
This equipment is not a toy. Children must be under surveillance to ensure that they do not play with this lift.
If the unit is being stored do not double stack.
Retain all packaging until the unit has been inspected for damage.
Maintenance Instructions
There are no user maintenance or adjustment points on this machine. Simply clean dust and dirt from the outside
of the unit and inspect for damage or breaks. Cleaners and disinfectants must not be highly alkaline or acidic.
The user should visually check the equipment for signs of wear or misuse before each time of using and for the
security of the screen or any accessories.
The condition of electrical cables and plugs should be checked for wear or abrasion before use.
In addition the equipment should be visually inspected in more detail every three months to ensure that the unit is
functioning properly and if it is not the user should report this to the manufacturer for advice or for the return of the
unit to base for repair.
Incidences of misuse must be reported immediately and the unit placed out of commission.
All repairs to the unit must only be carried out in Loxit’s workshops as special tools must be used.
The warranty is only valid in so far as the equipment has been used and maintained correctly and has not been
tampered with.
Violent treatment will invalidate the warranty.
During operation if the unit makes any unusual noises or smells turn off the power supply at the mains immediately.
Continuous use maximum period 2 minutes. Maximum use 10% (6 minutes in any hour.)
Ambient temperature range +5deg C to +40 deg C
The noise produced by the unit when static is silent which represents 99% of the time in use.
The noise produced by the unit when moving is consistent with other office equipment and would by comparison be
rated as low.
