LPKF ZelFlex QR User manual

1 V1.00 © 2009
ZelFlex QR
Quick Released double-sided mechanical stretching frame
Step by step User guide

2
Frame without stencil
ZelFlex QR
V1.00 © 2009

3
Using the two hexagon-
headed screws, attach the
rear bar according to the
stencil length.
Tighten them.
Rear bar must be
parallel to the rear
frame profile.
ZelFlex QR
V1.00 © 2009

4
Unwind the nuts from the
stretching screws by about
10 mm.
ZelFlex QR
V1.00 © 2009

5
Remove the holding bars
from the rear clamping and
front stretching bars.
ZelFlex QR
V1.00 © 2009

6
Remove the holding bars in 3 steps:
Step 1 – Press the holding bar down
Step 2 - Move the holding bar to the
right direction
Step 3 – Remove the holding bar
ZelFlex QR
V1.00 © 2009

7
Remove holdings bars and
place them in front of and
behind the frame.
ZelFlex QR
V1.00 © 2009

8
Place the stencil to the pins
on the rear clamping bar.
ZelFlex QR
V1.00 © 2009

9
Close the rear clamping
bar with the rear holding
bar.
ZelFlex QR
V1.00 © 2009

10
Close the rear holding bar in 3 steps:
Step 1 – Place the holding bar to the
rear clamping bar
Step 2 - Press down the holding bar and
move it to the left.
Step 3 - Release the holding bar.
ZelFlex QR
V1.00 © 2009