LST EDS500-1 User manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
EDS-UMB500-1_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Monitor Modules
EDS500-1, ÜMB500-1
Position Switch EDS500-1
The Position Switch EDS500-1 (fi g. A) is an addressable
module and serves for the confi rmation of the position
of mechanical devices, such as slides or valves, via the
bidirectional communication on the ADM loop with Sys-
tem Sensor/200 protocol. The module is fi tted into a
plastic case. Due to the use of optoelectronic compon-
ents the module is especially durable and fail-safe. The
mounting terminals are designed according to DIN 912
M5. The module address is entered using a push button
and can be verifi ed by means of an LED.
• ADM loop technology with
System Sensor/200 protocol
• Confi rmation of the valve position or
integration of contact detectors into
the ADM loop
• Status LED
• Setting of address by means of
push button
• Small design
Specifi cations
Operating voltage Supply through loop voltage
Current consumption approx. 300µA (quiescent)
Ambient temperature -20°C to +60°C
Dimensions L × W × H 59 × 32 × 63 (mm)
Colour red/black
Protection class IP65
Weight 80g
Order number 249090
Order name Position Switch/Anal./500/SS EDS500-1
fi g. A
fi g. B

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL [phone] • FAX [phone]
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
EDS-UMB500-1_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Monitor Module ÜMB500-1
The Monitor Module ÜMB500-1 (fi g. B) is an addressab-
le module for the integration of a contact detector, such
as a pressure switch or a temperature monitor, into the
bidirectional communication on the ADM loop with Sys-
tem Sensor/200 protocol.
The module is fi tted into a round, transparent plastic
case and is connected to the detector and the loop by
means of 4 fl ying leads. The module address is entered
using a push button and can be verifi ed by means of an
LED. Since the module has no mounting mechanism of
its own, it must be mounted in the detector housing.
Specifi cations
Operating voltage Supply through loop voltage
Current consumption approx. 300µA (quiescent)
Ambient temperature -20°C to +60°C
Dimensions ø × H 45 × 16 (mm)
Colour transparent
Weight 16g
Order number 249091
Order name Monitor Module/Box/Anal./500/SS ÜMB500-1