Ltech LT-424-MC User manual

Dimensions: L48×W28×H14(mm)
Package Size: L50×W40×H30(mm)
Weight(G.W.): 32g
Interface Protocol: DALI (IEC62386)
Power Supply: DALI Bus
Current: ≤8mA (static)
Working Temperature: -30℃~55℃
48mm
14mm
28mm 150mm
UninstallInstall
Mode Broadcast:
Main Characteristics
Dimensions Installation Instruction
PC
Small size, easy installation.
No external power supply, simply connected to the DALI bus.
Low voltage operation, safe and reliable.
Applicable to home, office, hotel, supermarket etc.
Ordinary reset switch can achieve DALI intelligent control.
plastic shell.
Hide this product in the switch box
DALI Broadcast Push Switch
LT-424-MC
warranty
5 years
1
Broadcast
DALI Push Switch
COM
IN4
IN3
IN2
IN1
DA
DA
Switch Type
Switch Type
DALI Bus
Digital touch switch
Reset switch Doorbell switch
Short press: Press and release in 1 second to turn on/off.
Long Press: Press for more than 1 for dimming, first long press is increase brightness,
release and long press again is decrease brightness.
second

2
DALI Bus Power Supply
DALI-PS-MINI
L N
100-240V AC
DALI BUS
Connections
Update Time: 2015.06.15
Reset Switch
1. Disconnect the power supply of all devices on the DALI bus before installing.
Installation:
Note: This product is only suitable for the reset switch. It can be Key 1, Key 2, Key 3 or Key 4.
If the switch failure occurs after pressing,
1. f the connection is correct;
2. Make sure to use the reset switch;
3. Check if the DALI power output is stable.
please check:
I
Troubleshooting:
3. Open the shell, set up the address.
2. Connect according to the above wiring diagram. DALI bus does not distinguish plus-minus polarity. Meanwhile connected
to the reset switch.
LT-424-MC
Broadcast
DALI Dimming Driver
DALI Dimming Driver
DALI Dimming Driver
DALI Dimming Driver
www.ltech-led.com