LTERIVER TECHNOLOGY E1200 User manual

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
PackageInside:1.WiFiRepeater 2.Product instruction 3. Ethernet (RJ45)Cable 4.Gift Box 5. Warranty Card
This device have three function:
A. Wi-Fi Repeater B. Wi-Fi Router C. Wireless AP
Setting Preparation:
A. Push the mode switch in the right mode you need: Router/Repeater/AP
B. Push the power button in “on” side
C. Plug the device on the outlet or power strip.
D. A device can connect Wi-Fi.
PC, Smart phone(iphone/samsung/htc/lg etc),ipad ,notebook etc
Setting Wi-Fi Repeater Mode:

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
Preparation: A. Push the power button ‘on’. B. Push the mode button in “Repeater” side. C. Plug the device on
the outlet or power strip
Choose Location: Put the Repeater in the mid-way between weak Wi-Fi spot and your Router ,and ensure the
spot can get three bar Wi-Fi signal from your router(can test by your cell phone or see it in Step6).
Web Setting by your smart phone/PC/Tablet PC/Note book/ipad/iphone etc
1.Open the cell phone ,Select the “Wireless-N” or “Wireless-AC” and connect it.
2.Open your browser enter “192.168.10.1”or”ap.setup”
3.You will in this page, enter User Name and Password “admin”. Can choose your local language here.

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
4.If you meet this page ,we suggest you choose “cancel”(for fear that you may forget the new PW)
5.Please choose “Repeater Wizard”.

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
6.A. After it scanned the Wi-Fi signal around your room, select your Wi-Fi need extend. B. Verify Wi-Fi
password of your router(Please ensure PW is correct or you have to rest the repeater and setting in second
time). C. Change the default New Wi-Fi name to yours .D."Apply" your setting .(do as the picture said please).
+The 2.4G SSID and AC SSID we changed just for example, you can change to any name you like.
+After your setting ,the new Wi-Fi repeater's signal PASSWORD same as your router's, just different in name.

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
“Apply ” your setting, then complete the setting. Can enjoy your new Wi-Fi better speed and coverage.
Easy Setting Repeater By WPS(the router need to have this function):
Power on this device, after the Wi-Fi LED light on,press the WPS key of the Repeater about 6~8
seconds ,when the WPS light flashing ,release the WPS button.it will flashing two minutes.2. In the two minutes
press the WPS button of your router about 5 seconds, after the WPS led light flashing, release it.

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
Wait few seconds ,it will connected .If it can not set by WPS please refer phone setting.
Warning: If you've set up the repeater and can connect to it ,but can not get into the internet .That's because
the PASSWORD of your router's is incorrect. Have to rest the repeater and setting in second time.
Wi-Fi Router Mode:
Preparation: A. Push the power button ‘on’. B. Push the mode button in “Router” side. C. . Plug the device on
the outlet or power strip D. Connect a ethernet cable from the Modem on the Repeater's WAN ports.
Setting by your smart phone/PC/Tablet PC/Note book/ipad/iphone etc
1.Select the “Wireless-N”or“Wireless-AC”
2.Open your browser enter “192.168.10.1”or”ap.setup”
3.You will in this page, enter User Name and Password “admin”

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
4.If you meet this page ,we suggest you choose “cancel”
5.Please choose “Router Wizard”

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
6.A.Choose your internet type . 2.Choose security type. 3.Setting the Wi-Fi password
7.Complete your setting, enjoy high speed Wi-Fi connection.

LTERIVER TECHNOLOGY LTD E1200 Installation Guide
Official Site: www.lteriver.com Tech Support:[e-mail] Business Cooperation:[e-mail]
Wi-Fi AP Mode:
AP Mode Setting: Please just plug an RJ 45 cable/Ethernet cable from your router in this Repeater’s ‘WAN”
Ports ,it will work. You can share the Wi-Fi signal. Just need plug and use.If you need to set up the
password,Just need to get into the 192.168.10.1 add the password like the setting in repeater mode.