LTH PRO LED PAR 64 COB 250W 5xWHITE User manual

LTH PROfessional - LED PAR COB 250W 5xWHITE

Manual | LED PAR COB 250W 5xWHITE
INTRODUCTION
Thank you for purchasing LED PAR 64 COB 250W 5xWHITE. For safety reasons and to ensure the troublefree
operation, carefully read the instructions.
SAFETY INFORMATION
1. Installation should be done by qualied personnel in order to minimize the risk of accidental electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you notice any signs
of damage you should contact your dealer immediately. Do not connect the device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
PRODUCT INFORMATION
The device is equipped with high-quality, bright COB LED which consists of 5 rows of independently
controlled LED chips with color temperatures of:
1. 1900-2100K
2. 3000-3200K
3. 4000-4300K
4. 5000-5500K
5. 9000-10000K
Unique design, high quality and high durability make this device a great tool for both power users and
those, who value simplicity and reliability.
The ergonomic double bracket (included) facilitates the use of the device in any condition. In order to
expand the range of mounting options, the holder has an additional mounting holes.
The electronics is made of high quality components and oers several features such as:
PRODUCT INFORMATION
Features
• Full DMX signal regeneration
• Electronic protection against overheating
• THEATRE or DISCO cooling volume modes.
• Permanent color correction
• Native support for optional wireless DMX module (optional)

Manual | LED PAR COB 250W 5xWHITE
Specication
• Power consumption: 250W
• Power supply voltage: 100 - 245V
• Voltage frequency: 50/60Hz
• Diode type: COB 6in1
• Number of diodes: 1
• Diode power: 250W
• Display: LCD Matrix
• Color: White: 2000K, 3000K, 4000K, 5000K, 9000K
(smooth adjustment in the range of 2000-9000K)
• Color rendering index (CRI): 98
• Beam angle (min): 37°
• Beam angle (max): 37°
• Dimming: Linear: 0 - 100%
• Number of DMX channels: 7 / 8
• DMX standard: DMX 512
• Control interface: 4 buttons
• Operating modes: DMX512, Auto, Sound-controlled, Master / Slave, Manual color
• Features: DMX Signal regeneration, Electronic protection against overheating
• AC IN: powerCON
• AC OUT: powerCON
• DMX IN: XLR - 3 pin
• DMX OUT: XLR - 3 pin
• IP Rating: IP20
• Housing made: ABS
• Cooling: Active
• Height [cm]: 30
• Width [cm]: 27
• Depth [cm]: 20
• Weight [kg]: 3,8
• Weight with packaging [kg]: 4,8
• Set includes: Power cord, Double bracket, Barn Doors
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting
to the mains, make sure that the device is securely mounted.The manufacturer is not responsible for
damage caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical
parameters are consistent with device requirements. All activities, including connecting the
device to the mains must be performed by qualied personnel.

Manual | LED PAR COB 250W 5xWHITE
CONNECTIONS
The device is equipped with the following interfaces:
1. DMX (in/out): XLR 3-pin socket
2. Power (in/out): powerCON socket
a) Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
b) Voltage specication
Input Voltage Total Power Frequency
100~245V 250W 50/60Hz

Manual | LED PAR COB 250W 5xWHITE
c) Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualied personnel. Make sure that the power grid supply
parameters are consistent with device parameters and limitations are not exceeded.
CAUTION!In the case of cable damage do not attempt to repair. Replacement or repair can be
made only on the manufacturer or by a person with appropriate permissions.
OPERATION MANUAL
a) Control panel
The control panel is equipped with LCD display and 4 control buttons with the following functions:
1. MENU – enter to main menu, go back from the selected options, cancel changes
2. DOWN – choose option, edit parameter
3. UP – choose option, edit parameter
4. ENTER – edit selected option, conrm changes
b) Menu / Menu diagram:

Manual | LED PAR COB 250W 5xWHITE
To achieve the desired eect after making changes in Manual settings,
Demo or Sound mode, you should:
1. Disconnect DMX signal
2. Set the appropriate device response in Menu -> DMX o
3. Set and save the parameters in the selected mode (Manual settings, Demo, Sound)
4.Wait about 1s in order to the device detected the DMX signal status

Manual | LED PAR COB 250W 5xWHITE
c) DMX channel list
7CH mode
Channel Function Eect
CH 1 Dimmer 0-255: 0-100%
CH 2 Strobo 0-11: No Function
11-255: Strobo 1-20Hz
CH 3 White 1 (1900-2100K warm) 0-255: 0-100%
CH 4 White 2 (3000-3200K medium-warm 1) 0-255: 0-100%
CH 5 White 3 (4000-4300K medium-warm 2) 0-255: 0-100%
CH 6 White 4 (5000-5200K neutral) 0-255: 0-100%
CH 7 White 5 (1900-2000K cold) 0-255: 0-100%

Manual | LED PAR COB 250W 5xWHITE
8CH mode
Channel Function Eect
CH 1 Dimmer 0-255: 0-100%
CH 2 Strobo 0-11: No Function
11-255: Strobo 1-20Hz
CH 3 White 1 (1900-2100K warm) 0-255: 0-100%
CH 4 White 2 (3000-3200K medium-warm 1) 0-255: 0-100%
CH 5 White 3 (4000-4300K medium-warm 2) 0-255: 0-100%
CH 6 White 4 (5000-5200K neutral) 0-255: 0-100%
CH 7 White 5 (1900-2000K cold) 0-255: 0-100%
CH 8 Color change
0-19: No Function
20-39: Color 1
40-59: Color 2
60-79: Color 3
80-99: Color 4
100-119: Color 5
120-139: Color 6
140-159: Color 7
160-179: Color 8
180-199: Color 9
200-219: Color 10
220-239: Color 11
240-255: Color 12

Manual | LED PAR COB 250W 5xWHITE
Das Lichttechnikhaus Vertriebs GmbH
Rudolf-Diesel-Str. 3, D-89312 Günzburg
Telefon [phone]
Fax [phone]
E-Mail [email protected]
Web www.lth-gmbh.de