Lucent Technologies DEFINITY Guide User manual

555-230-796
Comcode 107634560
Issue 2
July 1997
DEFINITY®Extender
Remote Module
User’s Guide
Cvrfrnt.fm Page 1 Monday, July 28, 1997 11:39 AM

Copyright 1997, Lucent Technologies 555-230-796
All Rights Reserved Issue 2
Printed in USA July 1997
Notice
Every effort was made to ensure that the information in this book was complete and accurate at
the time of printing. However, information is subject to change.
Your Responsibility for Your System’s Security
Toll fraud is the unauthorized use of your telecommunications system by an unauthorized party,
for example, persons other than your company’s employees, agents, subcontractors, or persons
working on your company’s behalf. Note that there may be a risk of toll fraud associated with
your telecommunications system and, if toll fraud occurs, it can result in substantial additional
charges for your telecommunications services.
You and your system manager are responsible for the security of your system, such as program-
ming and configuring your equipment to prevent unauthorized use. The system manager is also
responsible for reading all installation, instruction, and system administration documents pro-
vided with this product in order to fully understand the features that can introduce risk of toll
fraud and the steps that can be taken to reduce that risk. Lucent Technologies does not warrant
that this product is immune from or will prevent unauthorized use of common-carrier telecommu-
nication services or facilities accessed through or connected to it. Lucent Technologies will not
be responsible for any charges that result from such unauthorized use.
Lucent Technologies Fraud Intervention
If you suspect that you are being victimized by toll fraud and you need technical support or assis-
tance, call the National Customer Care Center at 1 800 643-2353.
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
For further FCC information, see "Customer Support Information" below.
Industry Canada (IC) Interference Information
This digital apparatus does not exceed the Class B limits for radio noise emissions set out in the
radio interference regulations of the Canadian Department of Communications.
Le Présent Appareil Numérique n'émet pas de bruits radioélectriques dépassant les limites appli-
cables aux appareils numériques de la class B préscrites dans le reglement sur le brouillage
radioélectrique édicté par le ministère le ministère des Industrie Canada.
Cvrfrnt.fm Page 2 Monday, July 28, 1997 11:39 AM

Trademarks
DEFINITY is a registered trademark of Lucent Technologies in the US and other countries.
Ordering Information
Call: Lucent Technologies Publications Center
Voice 1 800 457-1235 International Voice 765 361-5353
Fax [phone] International Fax [phone]
Write: Lucent Technologies Publications Center
P.O. Box 4100
Crawfordsville, IN 47933
Order: Document No. 555-230-796
Comcode 107634560
Issue 2, July 1997
For more information about Lucent Technologies documents, refer to the section entitled “Related
Documents” in “About This Book”
Support Telephone Number
In the continental US, Lucent Technologies provides a toll-free customer helpline 24 hours a day.
Call the Lucent Technologies Helpline at 1 800 242-2121 or your Lucent Technologies authorized
dealer if you need assistance when installing programming, or using your system. Outside the
continental US, contact your local Lucent Technologies representative.
Warranty
Lucent Technologies provides a limited warranty on this product. Refer to “Limited Warranty” in
“Customer Support Information.”
Cvrfrnt.fm Page 3 Monday, July 28, 1997 11:39 AM

Contents
Issue 2 July 1997 i
Customer Support Information........................ix
■Support Telephone Number.....................................ix
■Security of Your System:
Preventing Toll Fraud...............................................x
■Lucent Technologies Fraud Intervention..................xi
■Limited Warranty......................................................xii
■FCC Notification and Repair Information .................xiii
■Installation and Operational Procedures..................xiv
■Federal Communications Commission (FCC)
Electromagnetic Interference Information................xvi
About This Book....................................................xvii
■Intended Audience ...................................................xvii
■Terms and Conventions...........................................xviii
■Typographical Conventions......................................xix
■How to Use This Book..............................................xix
■Product Safety Labels..............................................xx
■Related Documents..................................................xxi
■How to Comment on This Document.......................xxiii

Contents
ii Issue 2 July 1997
1Introduction ............................................................ 1-1
■System Operation and Configuration....................... 1-2
Equipment List.................................................... 1-3
Compatibility....................................................... 1-5
Options ............................................................... 1-5
■Specifications........................................................... 1-6
■Considerations......................................................... 1-8
2Installation.....................................................................2-1
■Location Requirements............................................ 2-2
■Electrical Requirements........................................... 2-2
■Connecting the Remote Module.............................. 2-3
■Installation Procedure.............................................. 2-4
Connections for Data Transmission................... 2-6

Contents
Issue 2 July 1997 iii
3Programming................................................................3-1
■Using the Telephone for Programming....................3-2
■Setting the Telephone Number ................................3-3
■Setting the Mode of Dialing......................................3-4
Setting Pulse Dialing...........................................3-4
Setting Tone Dialing............................................3-5
■Setting the Connect Rate.........................................3-6
■Setting the COM Port Baud Rate.............................3-8
■Exiting Programming................................................3-9
4Operating the Remote Module............................4-1
■Starting the Operation ............................................4-2
■Disconnecting.........................................................4-4
■Changing a Password ............................................4-6
■Checking System Software ....................................4-9

Contents
iv Issue 2 July 1997
5Troubleshooting..........................................................5-1
■Troubleshooting..................................................... 5-2
■LED Sequences..................................................... 5-3
■Error Messages ..................................................... 5-3
GL Glossary...........................................................................GL-1

Figures
Issue 2 July 1997 v
1Introduction
1-1 System Configuration.........................................1-2
2Installation
2-1 Remote Module Back Panel...............................2-3
2-2 RS-232 Cable Pin Connections .........................2-7
4Operating the Remote Module
4-1 Connect Sequence for the Remote Module.......4-3

Tables
vi Issue 2 July 1997
1Introduction
1-1 Remote Module Specifications.......................... 1-7
2Installation
2-1 DIP Switch Configuration................................... 2-5
3Programming
3-1 Telephone Keys Used in Programming............. 3-2
5Troubleshooting
5-1 Error Messages................................................. 5-4

Important Safety Instructions
Issue 2 July 1997 vii
The exclamation point in an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
When installing telephone equipment, always follow basic safety
precautions to reduce the risk of fire, electrical shock, and injury to
persons, including:
■Read and understand all instructions.
■Follow all warnings and instructions marked on or packed with
the product.
■Never install this unit or telephone wiring for it during a lightning
storm.
■Never install a telephone jack in a wet location unless the jack
is specifically designed for wet locations.
■Never touch uninsulated telephone wires or terminals unless
the telephone wiring has been disconnected at the network
interface.
■Use caution when installing or modifying telephone lines.
■Use only Lucent Technologies-manufactured DEFINITY
Enterprise Communications Server (ECS) circuit packs, carrier
assemblies, and power units in the DEFINITY ECS control unit.
■Use only Lucent Technologies-recommended/approved
DEFINITY ECS accessories.