Lucent Technologies Multiplexer and Transport System ADM 16/1 User manual

WaveStarADM 16/1
The 2.5 Gbps SDH Multiplexer and Transp rt System
ADM161_PB025.qxd 11/10/2000 3:14 PM Page 1

Lucent Technologies, leader in
optical networking, offers the
industry's widest range of
high-quality communications
systems. Intelligent
multiplexers, flexible high-
capacity transport systems and
associated management systems
form the building blocks of
today's networks. sing these
building blocks, customers are
provided with equipment to
meet their requirements for
services, capacity and quality.
The WaveStar ADM 16/1, is
a member of the WaveStar
family of Lucent Technologies
optical networking products.
INTRODUCTION
The WaveStar ADM 16/1 is a
high-capacity intelligent
ultiplexer and transport syste
able to ultiplex PDH, SDH,
SONET and EtherNet bit rates to
higher levels up to 2.5 Gbps
(STM-16). Because of this wide
range in capacity, this syste is a
key ele ent in building efficient
and flexible networks.
The main strengths of the product
are:
· Massive add/drop capacity
directly fro the
STM-16 level e.g. 504 x E1,
96 x DS-3,
64 x 10/100 BASE-T, 32 x
STM-1 etc.
· Co pact design (single row).
· Easy installation &
aintenance.
· Flexibility in applications.
· Advanced protection
echanis s allowing
state-of-the-art SDH network
design.
These outstanding features ake
the WaveStar ADM 16/1 one of
the ost cost-effective future-
proof network ele ents. The
syste can be deployed with
other Lucent Technologies optical
networking products, aking the
WaveStar ADM 16/1 one of the
ain building blocks of future
SDH networks.
The WaveStar ADM 16/1 is
controlled and anaged by
Lucent Technologies Integrated
Transport Manage ent (ITM), a
user-friendly network and
ele ent level anage ent
syste with in-service upgrade
facilities.
Figure 1: WaveStar ADM 16/1 Network Application
ADM161_PB025.qxd 11/10/2000 3:15 PM Page 2

FEATURES AND BENEFITS
One of the ain features of
the WaveStar ADM 16/1 is
the ability to add/drop and
flexibly cross-connect directly
fro the STM-16 level. Signals
that can be connected are: 1.5
(DS-1), 2 (E1), 34 (E3), 45 (DS-
3), 51.8 (STM-0), 140 (E4),
155 (STM-1/OC-3) and 622
(STM-4/OC-12) Mbps. Unique to
the syste is that it supports the
advanced protection echanis s
MS-SPRing, VC-SNC/N and Dual
Node Interconnection as well as
the conventional MSP. To reduce
overall installation and test ti e,
pre-fabricated cabling is used.
Summary of main features and
benefits:
· Protection echanis s
supported: MS-SPRing,
SNC/N, MSP and DNI.
· VC-4, VC-3 and VC-12 cross-
connect capability.
· Single product platfor for
STM-16 and STM-4
applications.
· Single network ele ent for
interconnection of STM-16,
STM-4 and STM-1 rings
· TransLAN-functionality
based on ML-PPP at 8 x
10/100 BASE-T for each
circuit pack.
· The syste architecture allows
a broad range of applications:
add/drop, ter inal, local
cross-connect.
· Support of ETSI
Synchronization Status
Message (SSM) protocol.
· AU-3 / TU-3 to AU-4
conversion.
· Full Ti e Slot Assign ent
(TSA) for port interface signals
and Ti e Slot Inter-change
(TSI) for through channels.
· Support of PDH signals: E1, E3
and E4.
· Support of SONET Signals:
DS-1, DS-3, OC-3 & OC-12.
Figure 2: Basic Architecture o the WaveStar ADM 16/1
Figure 3: ADM 16/1 open shel
ADM161_PB025.qxd 11/10/2000 3:15 PM Page 3

Figure 4: WaveStar ADM 16/1 Shel in rack
ADM161_PB025.qxd 11/10/2000 3:16 PM Page 4

· Support of SDH signals: STM-
0, STM-1, STM-4 & STM-16.
· Mixing of various payload
types.
· In-shelf optical booster or
booster/pre-a plifier.
· Re ote aintenance and
anage ent by Lucent
Technologies ITM network
anage ent syste .
· Co pact self-supporting single
shelf design and easy
installation.
· Duplication of critical circuit
racks in the shelf.
APPLICATIONS
The WaveStar ADM 16/1 is a
single product platfor for
STM-16, STM-4 and STM-1
applications. Based on its
flexibility with regard to interface
units and cross-connect
capabilities, the syste supports
applications for bandwidth
access, service-on-de and and
network protection.
The WaveStar ADM 16/1 can be
applied in two tiers of the
network: access & regional
networks. The syste allows for
growth and changing service
needs by supporting in-service
conversions and upgrades.
Inherent to its basic design, the
WaveStar ADM 16/1 operates
equally well within fully
synchronous as well as
asynchronous environ ents and
provides a flexible link between
the two.
The WaveStar ADM 16/1 supports a
large variety of configurations for
various network applications (see
Figure 1):
· Ter inal for point-to-point
connections.
· Ring add/drop ultiplexer or
STM-4 and 16 rings.
· Access ux to DWDM, 10G,
cross-connect & SONET.
· Hub ux of STM-1 and STM-4
rings to STM-16.
· Groo ing of lower-order VCs.
· PDH front-end for digital cross-
connect syste s.
· Single ADM 16/1 for
interconnection of STM-16,
STM-4 and STM-1 rings
(Ring Closure on tributary
side).
· TransLAN-functionality for
10/100 BASE-T Ethernet
signals.
Traffic can be protected by:
· Path protection: VC-n SNC/N.
· Section protection:
 MS-SPRing, MSP.
· Dual Node Interconnection
(DNI).
PRODUCT DESCRIPTION
This flexible product resulted
fro a big step forward in
technology. Due to the high level
of integration at the circuit pack
level, it is possible to add/drop up
to 504 x E1/DS1, 48 x E3,
64 x 10/100 BASE-T, 96 x
DS3/STM-0, 32 x E4/STM-1/OC-
3 or 8 x STM-4/OC-12 using only
one subrack. One rack with a
height of 2400 and 2600 ,
can acco odate two subracks.
The heart of the WaveStar ADM
16/1 syste is the Cross-
Connect, which has connections
with all interface cards (see
Figure 2). The Cross-Connect is
the core of the syste .
It enables the flexible routing of VC-4,
VC-3 and VC-12 between:
· Aggregate and aggregate.
· Aggregate and tributary.
· Tributary and tributary.
To contribute to overall syste
reliability and availability, the
Cross-Connect can be protected
by an acco panying unit. If
required, interface redundancy
can be provided. The flexible
design of the WaveStar ADM
16/1 akes it possible to place
interface units in al ost any
interface slot position of the
subrack. The Syste Controller
(SC) unit controls all ajor
functions of the WaveStar ADM
16/1 and co unicates with the
centralized anage ent syste
(ITM). Co unication is
established via the Data
Co unication Channels within
the STM-N section overhead
signals or via one of the Q-
interfaces of the syste . The
ITM-SC anages the WaveStar
ADM 16/1 at the ele ent level
and the ITM-NM can anage the
syste at the network level. The
ITM-Craft Interface Ter inal
(ITM-CIT) is used for anaging
s all networks and for
aintenance purposes.
The syste is synchronized by an
optionally duplicated Power and
Ti ing generator circuit pack.
Both 2048-kHz and 2048-kbps
synchronization interfaces are
supported. References can be
selected by and prioritized fro
a ong the synchronization
interfaces, STM-N interfaces and
2-Mbps tributary interfaces.
Reference protection is possible
by enabling the ETS 300 417-6
co pliant synchronization
essage protocol which uses the
S1-byte infor ation (SSM
support).
ADM161_PB025.qxd 11/10/2000 3:17 PM Page 5

Technical Data
Inter aces
Co pliant with the ITU-T Reco endations:
General G.707 (includes G.708 and G.709)
Equip ent G.781, G.782, G.783, G.784, G.813
Physical interface G.957 & G.691 for optics and G.703 for
electrical interfaces.
Perfor ance require ents G.823, G.825, G.826
Mapping Structure AU4, AU-3 to TU-3, TU-3 & TU-12
(TU-11), VC-4, VC-3 and VC-12
Electrical Inter aces
1.5 Mbps a-synchronous/byte-synchronous 63 (DS-1) interfaces per circuit pack
2 Mbps a-synchronous/byte-synchronous 63 (E1) interfaces per circuit pack
34 / 45-Mbps and 45 Mbps a-synchronous 12 (E3/DS-3) interfaces per circuit pack
140 Mbps/STM-1 electrical intra-station 4 (E4/STM-1) interfaces per circuit pack
Optical Inter aces
Ethernet 10/100 BASE-T & (ML-PPP) 8 interfaces per circuit pack
STM-0 (51840 kbps) interface 12 x interfaces per circuit pack
STM-1/OC-3 (155520 kbps) interface 4 x (S-1.1 & L-1.2) interfaces per circuit
pack
STM-4/OC-12 (622080 kbps) interface 1 x (S-4.1 & L-4.2) interface per circuit
pack
STM-16 (2 488 320 kbps) interfaces 1 x (L-16.1, L-16.2 & L-16.3) interface
per circuit pack
Optical Booster/Pre-a plifier 1 x (U-16.2/3) interface per circuit pack
Optical Booster 1 x (V-16.2/3) interface per circuit pack
OLS 80G (DWDM) interworking 1 x interface per circuit pack, 16 different
wavelengths (1549 - 1559 n )
OLS 400G (DWDM) Interworking 1x interface per circuit pack, 80 different
wavelengths (1530 - 1565 n )
Data interfaces:
Six user selectable datachannels User can select out of E1, E2, F1, F2
and NU bytes (4xG.703 and 2xV.11)
Standard External clock interfaces Two progra able Input/Output
station clock interfaces: 2048 kHz
(G703.10) or 2048 kbps
(G703.6), 75 or 120 W
Bandwidth Management
Syste capacity: VC-12: 504 x 1.5 Mbps, 504 x 2 Mbps,
VC-3: 48 x 34 Mbps, 96 x 45 Mbps,
96 x STM-0,
VC-4: 32 x 140 Mbps, 32 x STM-1 or
8 x STM-4
Co plete VC-4 Cross-connecting
Higher Order Cross-connect size 64 x 64 VC-4
Lower Order Cross-connect currently 16x16 and 32 x 32 VC-4
Fixed Cross-Connect for 0x1 and 0x2 Ter inal Applications
Uni & Bi-directional Cross-connecting
Broadcast connections type VC-n
VC-4-4c Continuos Concatenation
Higher Order and Lower Order broadcast functionality 1:N (N£9)
Protection access (LPT) on MS-SPRing
Scalable MS-SPRing
Drop & Continue
Per ormance requirements
Jitter on STM-N interfaces G.813, G.825
Jitter on PDH interfaces G.823, G.783
Error Perfor ance G.826
Perfor ance onitoring G.784, G.826
ADM161_PB025.qxd 11/10/2000 3:17 PM Page 6

Per ormance Monitorings
Trail Ter ination Points Equip ent
VC-12 for each DS1 and E1 port
VC-3 for each DS3, E3 and STM-0 interfaces
VC-4 for each E4 interface and on the Cross-Connect
MS-0 Multiplex Section on the STM-0 interfaces
MS-1 Multiplex Section on the STM-1 interfaces
MS-4 Multiplex Section on the STM-4 interfaces
RS-16 Regenerator Section of the 2.5 Gbps interfaces
MS-16 Multiplex Section of the 2.5 Gbps interfaces
Non-Intrusive Monitoring on VC-4, VC-3 & VC-12 trails & VC- 4- 4c
Severity setting for alar s on each TP instance
Enhance ents co pliant 24 hr counters Unavailable period storage
History bin: every 15 inutes (16 bins + 4 hour storage ti e)
Every 24 hours (1 bin + 1 day storage ti e)
Threshold reports
Supervision and alarms
Plug-in circuit pack Indication LED continuously on: diagnostic error
LED flashing: trans ission signal error
Syste Controller indicators/buttons:
LED indicators Power, Pro pt and Deferred alar
Abnor al, Info, Suppressed, UseCIT,
and Disconnect
Push-buttons Suppress, Disconnect
CIT connector F-interfaces V.10/RS-232
Station alar interface outputs Floating
Miscellaneous Discretes 8 inputs and 8 outputs
Q-LAN interface to connect to EMS or other Network
Ele ents
Protection and redundancy
Tributary Level Redundancy:
1:N Equip ent protection on 1.5 Mbps & 2 Mbps Interface circuit packs (N= ax. 8)
1+1 Equip ent protection on 34/45 Mbps, 45 Mbps Interface circuit packs
1:N Equip ent protection on 140/STM1e (N= ax. 4)
1+1 Equip ent protection on Cross-connect circuit pack and Power & Ti ing circuit
pack
SNC/N protection:
VC-4 level
VC-12, VC-3 level
Progra able hold-off ti es
Dual Node Interworking (DNI):
between two MS-SPRings
between MS-SPRing and LO-SNC protected SubNetworks
Support of VC-4-4c Concatenation
MSP:
1+1 MSP on optical STM-0 (G.783 Annex B), STM-1 (G.783 Annex A & B) and
STM-4 (G.783 Annex A & B) tributary Interface signals
1+1 MSP on optical Line Interface circuit packs STM-16 (G.783 Annex A)
MS-SPRing:
MS-SPRing in two fiber ring Add/Drop applications
Selective MS-SPRing
Cascading of protection sche es in one Network Ele ent
Progra able hold-off ti es
Maxi u of 50 s switching ti e for all protection echanis s
ADM161_PB025.qxd 11/10/2000 3:17 PM Page 7

This docu ent is for planning purposes
only, and is not intended to odify or
supple ent any Lucent Technologies
specifications or warranties relating to
these products or services.
Perfor ance figures and data quoted in
this docu ent are typical and ust be
specifically confir ed in writing by
Lucent Technologies before they beco e
applicable to any particular order or
contract. The co pany reserves the right
to ake alterations or a end ents to
the detailed specifications at its discretion.
The publication of infor ation in this
docu ent does not i ply freedo fro
patent or other protective rights of
Lucent Technologies or others.
WaveStar is a trade ark of Lucent
Technologies Inc.
To learn ore about our co prehensive
portfolio and the new WaveStar ONG
Series, please contact your Lucent
Technologies Sales Representative
or call [phone] Visit our web
site at http://www.lucent-optical.co
Copyright © 1999 Lucent Technologies.
All Rights Reserved.
Printed in Holland
Lucent Technologies Inc.
Marketing Co unications
Order Nu ber: PB-025/991102
Timing and Synchronization
Built-in oscillator Standard Accuracy 4.6 pp acc.G.813 option 1
Built-in oscillator Stratu -3 Accuracy 4.6 pp acc.G813 option 1,
Stability 0.37 pp / first 24 hours
Ti ing odes:
Free running ode Accuracy 4.6 pp
Hold-over ode
Locked ode with reference to- one of the external sync. inputs
- one of the 2 Mbps tributary inputs
- one of the STM-N inputs
Auto atic reference signal switching Co pliant with ETSI ETS 300 417-6
Support of Synchronization Status Message on STM-N interfaces, 2 Mbps and at
2048 kbps external clock interface
Reti ing on 2 Mbps
Network Management
Fully anageable by ITM-NM and ITM-SC
Local Workstation (ITM-CIT) via RJ-45
connections V.10(RS-232 co patible) / F-interface
Access to E bedded Co unication Channels
via in-station Q-LAN interface G.773-CLNS1 / 10-Base-T and
10-Base-2 Interfaces
ITM-CIT for s all network anage ent CIT-Q connector / V.10
Physical design
Subrack di ensions 750 x 500 x 545 (H x W x D)
In accordance with ETSI
Reco endation
ETS 300 119-4 for wide racks
Rack Types 2000 Earthquake proof (zone 4)
2200 ETSI (D700) rack
2600 ETSI (D700) rack
Connectors-Optical Standard universal build-out optical
connector (FC/PC, SC) on the STM-4
and STM-16 interfaces
LC connectors on STM-0 and LC or SC
connectors on STM-1 interfaces
Connectors-Electrical Choice out of: SUB-D, DIN Coax, APT
Coax, Modular Jack, BT43, ISC 1.5/5.6
Connectors-Ethernet RJ-45
Station power input (Battery) -48 or -60 V DC (Range: -40,5. .. -72 V
DC)
Power Consu ption 310 Watt for an average configuration
Environmental conditions
Acc. ETSI Require ent Class 3.1 Environ ent: 3.1 extended (3.1E)
Te perature range Hu idity
Nor al operation +5°C to + 45°C up to 90%
Short ter operation 0°C to + 50°C up to 80%*
Storage- 25°C to + 55°C up to 100%
*Short ter conditions last at ost 72 hours per year during at ost 15 days
EMC
EC Declaration of Confor ity per ETS300 386-1 & -2: "EMC require ents for Public
Teleco unication Network Equip ent" which covers:
Radiated e ission EN 55022
Conducted e ission EN 55022
Electro-static discharge IEC 801-2,3,4,
Radiated i unity IEC 1000-4-x series
Conducted i unity:
- Electrical fast transients IEC 1000-4-x series
- Surges IEC 1000-4-x series
- Continuous wave IEC 1000-4-x series
Co pliant with LVD EN 60950
ADM161_PB025.qxd 11/10/2000 3:17 PM Page 8