LumaCross LLBCHG3 User manual

Installation Guide
Model:
LLBCHG3
PRINTED IN CHINA
READ THESE INSTRUCTIONS
AND SAVE THEM FOR FUTURE USE
Table of Contents:
Safety Tips. pg. 2
Unpacking Your Fixture. pg. 2
Parts Inventory. pg. 2
Installation. pg. 3
Troubleshooting. pg. 3
Warranty. pg. 3
page 1
E182582
Christian LED Light

1. Unpacking Your Fixture.
Carefully open the packaging. Remove items from
Styrofoam inserts. Do not discard carton or Styrofoam
inserts should this fixture need to be returned for
repairs.
Check against parts inventory that all parts have been
included.
2. Parts Inventory.
a. fixture. 1 piece
b. glass shade. 1 piece
c. LumaCross LED bulb. 1 piece
SAFETY TIPS.
page 2
ab
READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING
YOUR FIXTURE AND SAVE THESE INSTRUCTIONS.
WARNING: To reduce the risk of electric shock, DO NOT use the product if power cord is frayed or broken.
DO NOT use bulbs having a wattage greater than the maximum value stated on the fixture.The use of
bulbs with higher wattage than specified will increase temperatures and risk of fire.
WARNING: This lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the
risk of electric shock.This plug will fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. NEVER use with an extension cord unless the plug
can be fully inserted. DO NOT alter the plug.
Do not use detergents when cleaning the fixture. A soft cloth will be suitable for most cleaning. Use window
cleaner to clean glass if necessary.
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible
conditions and situations that may occur. It must be understood that common sense and caution are necessary
factors in the installation and operation of this fixture.
bulb required:
LumaCross LED bulb (included)
c

page 3
3. Installation.
Troubleshooting.
Problem: Light does not come on.
Solutions:
1. Verify that lamp is plugged into outlet and power
supply is ON.
2.Verify that bulb is installed correctly.
3. Replace defective bulb with same type of bulb.
No tools required for installation.
Install the LumaCross LED bulb (included).You may
also use any other medium base bulb with a max of
60 watts. DO NOT OVER TIGHTEN BULB.
IMPORTANT:When replacing bulb, please allow bulb
and shade to cool down before touching them.
Note: This is a touch activated lamp. Light will come
on when the base is touched.
Place glass shade over fixture.
Remove preassembled cap from end of power cord
and plug power cord into wall outlet.
bulb
glass shade
fixture
WARRANTY.
LUMACROSS™ LAMP and LUMACROSS LED LIGHT BULB ONE-YEAR LIMITED WARRANTY. Subject to the terms and conditions in this LIMITED
WARRANTY, Inner Lighting LLC (IL), warrants that the LumaCross Lamp and LumaCross LED Light Bulb, (“Product”) purchased directly from IL or an
authorized reseller, will be free from defects in material and workmanship for a period of One (1) Year from the date of purchase (the“Warranty
Period”).The Product is warranted for indoor use only and the warranty is void if the Product is not installed, operated, or maintained in accordance
with the National Electric Code (NEC); the Standards for Safety of Underwriters Laboratories, Inc. (UL); and any specific instructions supplied by Inner
Lighting for the installation, operation and maintenance of the Product.This warranty does not apply when damage from mechanical, physical,
electrical, water or abuse results in causing the malfunction. Deterioration of lamp finishes or other parts due to time or exposure to salt air, sunlight,
and corrosive cleaning products are specifically exempt and excluded from this warranty coverage.Inner Lighting shall have the final determination
of when such exclusions apply.
If either the LumaCross Lamp or LumaCross LED Light Bulb fails during the Warranty Period, return the Product with proof of purchase to: Inner
Lighting LLC 2360 Nevada Ave. North Golden Valley, MN 55427. Upon receipt of the returned Product and determination that its failure is covered
under this LIMITED WARRANTY we will, at our option, either provide a replacement Product or a Refund of your purchase price. Any cost related to
removal/return of the Product is your expense.
YOUR SOLE AND EXCLUSIVE REMEDY WITH RESPECT TO ANY CLAIM OR DAMAGE ARISING OUT OF, OR IN CONNECTION WITH YOUR PURCHASE AND
USE OF THE PRODUCT, IS LIMITED TO REPLACEMENT OF THE PRODUCT OR REFUND OF THE PURCHASE PRICE YOU PAID, AT THE SOLE DISCRETION OF
INNER LIGHTING LLC, PROVIDED, HOWEVER, INNER LIGHTING SHALL HAVE NO LIABILITY WHATSOEVER TO YOU UNLESS YOU HAVE FULLY COMPLIED
WITH THE REQUIREMENTS OF THIS WARRANTY,THE PRODUCTS ARE FOUND TO BE DEFECTIVE BY INNER LIGHTING AND YOU HAVE PAID FOR THE
PRODUCTS IN FULL.
INNER LIGHTING EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND MAKES NO OTHER
WARRANTIES TO YOU, EXPRESS OR IMPLIED, EXCEPT AS SPECIFICALLY PROVIDED IN THIS LIMITED WARRANTY.UNDER NO CIRCUMSTANCES SHALL
INNER LIGHTING BE LIABLE TO YOU FOR ANY PUNITIVE OR EXEMPLARY DAMAGES OR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, OR SPECIAL
DAMAGES (INCLUDING,WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE, PROFITS, REVENUE OR BUSINESS) ARISING FROM, OR IN ANY WAY
RELATED TO,THE SALE, USE OF, OR INABILITY TO USE THE PRODUCT.THIS EXCLUSION SHALL APPLY REGARDLESS OF WHETHER SUCH DAMAGES ARE
SOUGHT BASED ON BREACH OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE, STRICT LIABILITY IN TORT, OR ANY OTHER LEGAL OR EQUITABLE
THEORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to
you.This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
For questions about this warranty, please contact Inner Lighting at [e-mail] or by phone at 612.567.0905.
MULTI-STEP DIMMER FUNCTION
This lamp is equipped with a touch-control multi-step
dimmer.When operated with the LumaCross bulb, the
third step (high power) has been limited.This limitation
makes the light output in this mode just slightly more
than the output in the second step (medium power)
mode. This is not a defect.This power limiting feature is
designed to extend the life of the LumaCross bulb.