engineering
TRIM ASSEMBLY
Rugged solid brass or stainless steel exterior
trim for the ultimate in corrosion resistance.
LIGHT CONTROL MEDIA
Innovative accessory holder accommodates
up to three accessories. Choose from an
array of dichroic lters, a hex cell louver, an
internal linear spread lens, or the Temperature
Reduction Lens (TRL).
LAMP MODULE
The lamp module is the heart of the Monaco,
offering an IP68 ingress protection rating.
The tilt angle and rotation may be controlled
by the innovative Beam Driver™ biaxial
aiming system, integral to the Monaco’s
lamp module.
HOUSING
Rugged and corrosion resistant injection
molded polycarbonate housing offers long
term, outdoor durability, and provides a
5000 pound drive-over rating, when ordered
with the optional drive-over structural
bracket kit (-DSB).
Solid Metal Trim
1/2” Thick Tempered Glass Lens
Hex Cell Louver
TRL Lens*
Dichroic Filter
Accessory Holder
IP68 Seal
Reector Housing
Main Housing
MOISTURE MANAGEMENT
r'MPXUISPVHITZTUFNBMMPXT
moisture to easily exit the xture
r8BUFSQSPPGDBCMFT
r(BTLFUFEUPQUSJN
r(BTLFUFEBOENFDIBOJDBMMZ
sealed inner lamp module
THERMAL MANAGEMENT
r)FBUNBOBHFNFOUTZTUFNBMMPXTMVNJ-
naire to “breathe” to avoid overheating
r5FNQFSBUVSF3FEVDUJPO-FOT53-SFáFDUT
heat and parts of the infrared spectrum
back into the xture, reducing top lens
temperature
r1PUFOUJBMGPSVQUPUISFFMFOTFTCFUXFFO
the source and the exposed surface
Engineered for the Elements.
The Monaco defies earth, water, and traffic.
The Monaco 6000 family is both engineered to last and capable of withstanding the most
extreme outdoor environments. The innovative Venterra™ heat and water management system
is just one example of the intense engineering that went into the xture’s resilient design. The
corrosion resistant, in-ground housing is made from injection molded polycarbonate, and is
drive-over rated up to 5000 lbs.
Venterra™
Innovative Heat and Moisture Management.
The key component of the Venterra™ system is the inner lamp module, which is IP68 rated.
IP68 refers to an IEC standard that rates the protection an enclosure provides against particles
and liquids. The IP68 rating is the highest rating possible and ensures that the enclosure is not
only dust tight but can also withstand continuous submersion.
110º C
100º C
90º C
80º C
70º C
60º C
50º C
40º C
30º C
20º C
10º C
0º C
MH39T4
MH70T4
MH39T6
MH70T6
MH50
MH70
MH100
MH39PAR20
MH39PAR30L
MH70PAR30L
MH70PAR38
MH100PAR38
Hottest spot on outer lens without
temperature reduction lens (TRL) option
Hottest spot on outer lens with
temperature reduction lens (TRL) option
* Temperature
Reduction Lens (TRL)