Luxor/H.Wilson AVJ42 User manual

Customer Service Dept
2245 Delany Rd
Waukegan, IL 60087
Ph: 847/244-1800 • 800/323-4656
Fax: [phone] • 800/327-1698
Instruction Sheet
Models AVJ-42, AVJ-42C
AVJ42 AVJ-42C
Models AVJ-42, AVJ-42C 1 - rubber mat Tools Required: For Cabinet Models Only:
4 - 4˝ casters, 2 w/brake 1 - slotted screwdriver 2 - keys
4 - bolts 1 - rubber mallet
4 - Kep nuts
1-Electric Assembly with Hardware
Parts List
Position top stand assembly over bottom stand assembly, as
illustrated.
NOTE: Be sure cabling hole in corner of top and middle
shelves line up on top of each other.
Adjust top stand assembly up or down to desired height. Align
holes in all four legs, insert bolts and fasten with four Kep
nuts, as illustrated.
2Handle Holes
Cabling Holes
Top
Stand
Assembly
Bottom
Stand
Assembly
Kep Nut
Bolt
Turn bottom stand assembly upside down on a smooth
surface. Push the four casters firmly into the caster
socket holes in bottom of each leg as illustrated.
IMPORTANT: Casters must be fully seated. Tap with
rubber mallet firmly to properly seat casters. Turn the
stand right side up.
Back
Front
Place Locking Casters
as illustrated
1
https://www.supplychimp.com/

For safety and neat appearance, secure cord plug to cord with
plug snap, place rubber mat on top shelf.
Cabling Hole
Plug snap
45
3
CABINET MODELS ONLY
Place metal cordwrap onto metal top shelf making sure that the holes on the cord-
wrap align with the holes on the shelf. Place the two screws through the holes of
the electrical assembly. Place the electrical assebly with the two screws throug the
holes of the cordwrap and mounting bracket. Secure screws with wingnuts.
https://www.supplychimp.com/