LUZ NEGRA 41.089 User manual

Luz Negra reserves the right to modify the technical specifications of its products.
For up-to-date information, please visit our website www.luznegra.net
1/5rev.1 2023
ecoled by Luz Negra
1. When using the remote, if the indicated lamp is blinking quickly, please change the battery. Please don’t use poor quality batteries to avoid the leaking of battery
liquid which can damage the remote.
2. This 2.4GHz remote is a precise electronic product; don’t use it in humid or dusty areas or in environments with high temperatures or high voltages; Keep indoor
and dry and in an environment free of static electricity.
3. Please don’t use the remote in areas with metallic or strong electromagnetic waves, or it will negatively affect the controlling distance.
4. In the case of failure, please do not attempt to manipulate the product without the help of a fully-trained technician.
Attention
Technical data
Technical characteristics
Remote control for 4 zones
Apt for
Maximum distance of signal
reception
Connection type
Indoor
30m
Common anode
Functions
Regulation
Power supply
Mono colour - CCT - RGB - RGBW -
RGBW+CCT
2xAAA batteries (not included)
Wall bracket No
Ref: 41.089
Features:
• It is capable of controlling 4 different zones.
• 2.4GHz high RF wireless control with long distance controlling.
• Long distance transmission.
• Anti-interference and fast communication speed.
• Compatible with receivers: 41.026 / 41.071 / 40.017
Temperatures and operating conditions
Working temperature -10ºC / 40ºC
Transmission frequency 2.4GHz
Degree of protection
“On”
Zones
“Off”
Control type
Memory
IP20
Yes
4
Yes
Radiofrequency
Yes
Transmitting power
Standby power consumption:
6dBm
5μA
YEARS
3IP20 EMC LVD

Luz Negra reserves the right to modify the technical specifications of its products.
For up-to-date information, please visit our website www.luznegra.net
2/5rev.1 2023
ecoled by Luz Negra
Compatible with receivers:
41.026 / 41.071
40.017
Length 110.5mm
Width 53mm
Remote control for 4 zones
Height 21mm
Weight 49,9gr
Dimensions and weight
SwitchIndicator light
INPUT
V+RGBCW
V+RGBW
V+R
GB
V+CWCW
OUTPUT
WWWW
WW
V+WWWWW
Made in China
Input Voltage: DC12V~24V
Output: 6A/Channel
Total output Max: 15A
RF: 2.4GHz
Transmitting Power: 6dBm
Control Distance: 30m
Working Temperature: -20~60 ºC
WiFi 5 in 1 LED Strip Controller
Indicating lamp
show output mode
White Light
Yellow Light
Red Light
Green Light
Blue Light
Single Color Mode
Dual White Mode
RGB Mode
RGBW Mode
RGB+CCT Mode
V+RGBCW
V+RGBW
V+RGB
V+CWCW
OUTPUT
WWWW
WW
V+WWWWW
53mm 21mm
110,5mm

Luz Negra reserves the right to modify the technical specifications of its products.
For up-to-date information, please visit our website www.luznegra.net
3/5rev.1 2023
ecoled by Luz Negra
Remote control for 4 zones
Diagram
Master ON
Master OFF
Brightness +
Brightness -
Cooler white
4 x (un) link light
Zone ON
Warmer white
Zone OFF
• To dim all dual white lights at once or change the colour
temperature, first press “Master ON”.
• To do this with individual lights, first press “Zone ON”. Secondly,
set the adjustment for colour temperature or brightness.
• To turn on the night light mode of a single (dual white) light, press
and hold the “Zone OFF” from one of the 4 Zones.
• To turn on all the lights in night light mode, press and hold “Master
OFF”.
1. Linking code instructions
2. Unlinking code instructions
Link / Unlink
1. Switch off light then
switch on again after 10
seconds.
2. Short press “ “ button 3 times within
3 seconds when light on.
3. When light blinks slowly 3
times this means linking has
been successful.
Power Power
Unlinking failed if light is not blinking quickly, Please follow above steps again.
Note: Light haven’t linked that don’t need to unlink.
1. Switch off light then
switch on again after 10
seconds.
2. Short press “ “ button 5 times within
3 seconds when light on.
Unlinking must be the same as the
linking zone.
3. When light blinks quickly 10
times this means unlinking
has been successful.
Power Power
f light is not blinking slowly then linking has failed. Please, follow above steps again.
Note: lights that have been linked can’t link again.
Link / Unlink
button
Link / Unlink
button

Luz Negra reserves the right to modify the technical specifications of its products.
For up-to-date information, please visit our website www.luznegra.net
4/5rev.1 2023
ecoled by Luz Negra
Remote control for 4 zones
Grouping of several lights
You can add an endless number of lights to a zone on the 4-channel remote by linking the lights to different zones. This way you can be completely
flexible in creating different group combinations.
Below you can see some grouping examples.
Please note::
1. The user can re-program freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four
remotes (max).
2. Please check the battery installation and controller (totally discharge the power), when you programme after switching off and switching on.