STEP #4—SETUP Wi-Fi CONNECTIVITY
B. On your SmartGrill, press the power button and wait about 30
seconds for the SmartGrill to say “SmartGrill, at your service”.
STEP #6—START USING YOUR GRILL
• Turn your lights on by saying, “SmartGrill Lights”. To turn the lights off, say “SmartGrill, Lights” and the lights will now turn off.
• To try out a recipe, go back to your SmartGrill App and go to the Recipe icon.
• Select a recipe from the recipe list and click Cook Now to send the recipe to your SmartGrill. Follow the voice commands (how many
burners, place food on grill, turn food over, remove food from grill). Please note that it could take several minutes for your SmartGrill
to warm up and give you the command to place food on grill.
STEP #5—CALIBRATING YOUR SMARTGRILL
Before your first grilling session, use your SmartGrill app or voice command to calibrate your SmartGrill by Lynx™. This will set a
minimum flame level which is affected by ambient temperature, altitude, wind conditions and more. Calibration is required for
optimum performance of your SmartGrill. The calibration process will take 15-20 minutes.
To perform a calibration, please close the hood of the grill, then:
• By Voice Command: “SmartGrill, begin calibration.”
• By App:
Go to Resources
Select My SmartGrill
Select Calibrate Grill
Select Automatic Calibration
You will receive a “Calibration failed” if the SmartGrill did not complete the cycle. SmartGrill will automatically shutdown when
calibration is complete.
Need more help? Please refer to your detailed instruction manual or call our customer support team at 888-289-5969 and choose the
SmartGrill option #5.
A. On your Phone or Tablet, verify
that you have at least 60% wireless
signal at your SmartGrill. 60% or better
C. On your phone or tablet, switch to your Wi-Fi settings and
locate the wireless network called SmartGrill xxxx (xxxx is the
last four digits of your serial number) and connect to it. The
password is lynxgrill.
D. Now go back to your SmartGrill App and
go to the Resources icon, then
My Smart Grill
SmartGrill Wi-Fi Setup
Wait 10-20 seconds for the wi-fi setup menu.
Resources
E. Click on the SSID and enter the password for your home
network (information in STEP #1—REQUIREMENTS) then
select DONE. After 20-60 seconds, your SmartGrill will say
“SmartGrill is connected to the internet”, and your wireless
configuration is complete. Now just power the SmartGrill off,
then back on. SmartGrill will say “SmartGrill connected to
the internet” followed by “SmartGrill at your service.” On the
SmartGrill app click on the Grill icon and now your SmartGrill
is connected and ready to grill.
