
Ma
i
nt
e
n
a
n
ce
1.To reduce the risk of electrical shock or fire, do not expose this unit to rain or
moisture.
2. Intermittently using will extend this item’s service
life
3. Please clear the fan ,fan net , and optical lens in order to keep good work
state.
4. Do not use the alcohol or any other organic solvent to wipe the
shell.
St
a
te
m
e
n
t
The product has perfect performance and integrity packing. All users should be
strictly
comply with the warning and operating instructions as stated. Or we aren’t in charge
of
any result by misusing. Any damage resulting by misuse is not within the
Company’s
warranty. Any fault or problem caused by neglecting the manual is also not in the
charge
of
dealers.
Note: All information is subject to change without prior
notice.
Sa
f
et
y
P
r
eca
u
t
i
on
1. In order to guarantee the product’s life, please don’t put it in the damp places or
even
the environment over
60degress.
2. Always mount this unit in safe and stable
matter.
3. Install or dismantle should operate by professional
engineer
4. Using lamp,the change rate of power voltage should be within±10%,If the voltage
is
too high,it will shorten the light’s life; if it’s not enough, will influence the
effect
5. Please restart it 20 minutes later after turning off light , until full-cooling.
Frequent
switching will reduce the life span of lamps and bulbs; intermittent using will
improve
the life of bulbs and
lamps
。
5. In order to make sure the product is used well, please read the Manual
carefully.
Pr
odu
c
t
I
n
st
r
u
c
ti
on
·Lamp: Philip 5R (Color temperature:
8000K)
·Channel mode:16/20(optional) DMX512
Channel
·Pan scan:540°(16bit) Electric
correction
·Tilt scan:270°(16bit) Electric
correction
·Amazing dot matrix ,four tact switch, 180° turning
show
·Color wheel: one color wheel, 14 color+1
white