Fig. 1 Fig. 2
WARNING! Always use a saw chain designed as “low-
kickback” or a saw chain which meets the low-kickback
requirements! A standard saw chain (a chain which does
not have the kickback reducing guard links) should only
be used by an experienced professional operator!
Nevertheless, a low-kickback saw chain does not
completely eliminated kickback! A low-kickback or “safety”
chain should never be regarded as complete protection
against injury! Therefore always use a low-kickback saw
chain in conjunction with other kickback protection devices
such as the front guard/chain brake!
WARNING! Before removing, ensure the front guard/
chain brake (2) is in the disengaged position (see section
“In more Detail - Chain brake”). If in the engaged position,
pull the front guard/chain brake backwards until it ‘clicks’
into position.
Chain and guide bar
Use only the guide bar (4) and saw chain (3) according to the>
technical data of the product.
Place the product on a suitable at surface with the cover (8) >
facing upwards.
