Enter Pairing Mode : Press and hold the Home button for 3 seconds in the off
state. When the indicator light flashes quickly, it enters pairing mode. Connect to the
corresponding device name mentioned above to complete pairing.
Switch Pairing Device ： press and hold the Home button for 5 seconds to turn
off the controller. Then select the corresponding mode for the device and press and
hold the Home button for 3 seconds to enter pairing mode and re-pair.
Wired Connection:Use the included USB cable to connect the device and it will
automatically match the mode for connection.
1. In the off state, switch the rear toggle mode switch to the 2.4G position.
2. Insert the dongle into the USB port of the computer/Switch dock/Andro
-idTV. If the indicator light at the tail of the receiver flashes, it means the
controller enters pairing mode.
3. Press and hold the Home button for about 3 seconds until the 1# indicat
or light flashes, and the controller enters pairing mode.
4. The controller and dongle will automatically pair. The controller's indica
-tor light will stay on, and the receiver's tail indicator light will stay on, in
dicating a successful pairing. (Note: For successful pairing with PC, the
1# and 2# indicator lights will stay on; for successful pairing with Switch,
the #1 and #3 indicator lights will stay on; for successful pairing with And
-roid TV, the 1# and 4# indicator lights will stay on.)
Connection Step - 2.4G Connection:
2.4G Mode - Compatible with PC, Switch, and Android TV.
(Limited to Tri-Mode Edition)
2.4G mode uses an independent private protocol with lower la
-tency.
The 2.4G receiver can automatically recognize PC mode/Switch
mode/Android mode.
2.4G mode supports using the gyroscope axis sensing function
on the Switch console.
COMPATIBILITY
