MACHENIKE M-GAME G5 Pro User manual

G5PRO

Safety
Precautions
Precautions
Do not spray flammable insecticides or sprays near the handle.
Do not allow liquids such as water or juice to come into contact with the device.
This may cause the keys to malfunction or become damaged.
Do not unplug the USB cable with wet hands.
Do not use the device in damp or hot places, such as bathrooms.
Do not use it in places that are prone to dropping, dusty (such as beaches), or ha
-ve magnetic fields.
Do not place it on top of devices that generate heat, such as heat dissipation vents
or computer cases.
Operating Precautions
When using the device, do not exert excessive force, as this can cause hand fatigue
and accelerate key wear.
If you feel wrist or finger soreness during use, adjust your posture and force, or tak
-e a break.
If the wrist rest or any other components that come into direct contact with the ski
-n cause discomfort, stop using the device. Continuing to use it may cause rashes
or other allergic reactions.

1 x 2.4G dongle
1 x User manual1 x Gaming Controller
1 x USB data cable
PACKING CONTENTS
Maintenance
Please clean the handle with a soft dry cloth or a special cleaning cloth.
-Do not use solvents, including but not limited to gasoline, diluents, alcohol, kit
-chen detergents, or chemical cleaning cloths. This may cause external deforma
-tion or layer peeling.
-Do not use a wet cloth to wipe the handle, as this may cause liquid to enter the
inside of the device and cause malfunctions.

Bumper LB
(L1)
Hall Linear TriggerRT
(R2)
HOME Button
FN Button
Menu Button
ABXY Button
Left Hall
Linear Joystick
(L3)
Right Hall
Linear Joystick
(R3)
Bumper RB
(R1)
Hall Linear Trigger LT
(L2)
Directional
Pad（D-pad）
BACK Button
（ ） （ ）
BUTTON LAYOUT

The G5 PRO has a multi-key wake-up function. Before wireless con
-nection, please select the corresponding device mode:
2.4G mode - device name: MACHENIKE G5Pro; 1# indicator light flashes.
PC/iOS mode - device name: Xbox Wireless Controller; 2# indicator light flashes.
Switch mode - device name: Pro Controller; 3# indicator light flashes.
Android mode - device name: MACHENIKE G5Pro; 4# indicator light flashes.
Enter Pairing Mode : Press and hold the Home button for 3 seconds in the off
state. When the indicator light flashes quickly, it enters pairing mode. Connect to the
corresponding device name mentioned above to complete pairing.
Switch Pairing Device ： press and hold the Home button for 5 seconds to turn
off the controller. Then select the corresponding mode for the device and press and
hold the Home button for 3 seconds to enter pairing mode and re-pair.
Wired Connection:Use the included USB cable to connect the device and it will
automatically match the mode for connection.
Connection Mode (Platform)
Toggle Switch
Charging Contacts
M1
Programmable Button
M2
Programmable Button
M3
Programmable Button
（Trigger Marco）
M4
Programmable Button
（Trigger Marco）
CONNECTION

1. In the off state, switch the rear toggle mode switch to the 2.4G position.
2. Insert the dongle into the USB port of the computer/Switch dock/Andro
-idTV. If the indicator light at the tail of the receiver flashes, it means the
controller enters pairing mode.
3. Press and hold the Home button for about 3 seconds until the #1 indicat
or light flashes, and the controller enters pairing mode.
4. The controller and dongle will automatically pair. The controller's indica
-tor light will stay on, and the receiver's tail indicator light will stay on, in
dicating a successful pairing. (Note: For successful pairing with PC, the
#1 and #2 indicator lights will stay on; for successful pairing with Switch,
the #1 and #3 indicator lights will stay on; for successful pairing with And
-roid TV, the #1 and #4 indicator lights will stay on.)
5. When not in use, press and hold the Home button to turn off the controll
-er, or the controller will automatically turn off after 5 minutes of inactivity.
6. After the controller is turned off, the dongle indicator light will flash slow
-ly,indicating that it is waiting for the controller to reconnect. Next time
you use it, you can wake up the controller by pressing the Home/LB/RB
button and it will automatically reconnect.
Connection Step - 2.4G Connection:
2.4G Mode - Compatible with PC, Switch, and Android TV.
2.4G mode uses an independent private protocol with lower la
-tency.
The 2.4G receiver can automatically recognize PC mode/Switch
mode/Android mode.
2.4G mode supports using the gyroscope axis sensing function
on the Switch console.
COMPATIBILITY

PC Mode - Wireless mode on PC
Wireless Connection Steps:
The Windows operating system recommends using this controller in
PC mode, which is also compatible with Switch mode.
1.Turn the back mode switch to the PC position while the controller is tur
-ned off.
2.Press and hold the front Home button for about 3 seconds until the #2
indicator light flashes, indicating that the controller is in pairing mode.
3.In the Windows system, open Settings, click on Bluetooth & other devi
-ces, then click on Add Bluetooth or other devices.
PC mode is widely used for AAA games and the latest games.
Switch mode, which is the Switch Pro, can access gyroscope functionality
on Windows operating systems via Steam. The specific usage experience
and compatibility depend on the different game adaptations.
Tail SwitchStatus Indicator
COMPATIBILITY

Wired Connection Steps:
4.Select "Xbox Wireless Controller" from the list of Bluetooth devices, and
after successful pairing, the #2 indicator light will stay on for 2 seconds
and then show the battery level.
5.When not in use, the controller can be turned off by long-pressing the
Home button, or it will automatically turn off after 5 minutes of inactivity.
6.The controller has Bluetooth memory function and can be awakened by
short-pressing the Home/LB/RB button and automatically reconnecting
to the computer when used again.
1. In the power-off state, connect the controller to the computer with a data
cable, and it can be used directly.

Compatible with iOS 16 system version. If there are changes in the related
permissions in subsequent iOS updates, the iOS update shall prevail with
-out further notice.
The trigger supports linear travel function and requires game matching.
Supports Home button wake-up of the controller and quick reconnection
function.
1.Turn off the controller and switch the back gear switch to the iOS position.
2.Press and hold the Home button on the front for about 3 seconds until the
2nd indicator light flashes quickly, indicating that the controller has enter
-ed pairing mode.
3.Open the phone settings, go to Bluetooth and search for and connect to
"Xbox Wireless Controller".
4、4.After successful pairing, the 2nd indicator light will stay on for 2 seconds
and then return to the power indicator.
Note: This mode can only be used if the game natively supports controller
operation.
iOS Mode - iOS and for iPad OS
Connection Steps - Wireless connection
COMPATIBILITY
COMPATIBILITY

Switch Mode⸺NINTENDO SWITCH
When in Switch mode, it is recommended to press and hold the
Fn + A button combination for three seconds to switch to the Sw
-itch layout. The controller will vibrate once to indicate the switch.
This product can connect to both Switch console and PC in Switch
mode.
It supports Home button wake-up of the controller and remote co
-nsole wake-up function.
It also supports gyroscope function, which needs to be enabled in
the game settings that support this feature.
The trigger does not support linear travel function, which is not a p
-roduct problem but due to the limitations of the Switch platform.
Some games may not support the use of this controller even when
the Switch pro controller is not supported, which is a game restricti
-on, not a product problem.
1. Turn off the controller and switch the back mode switch to the Switch
position.
2. Press and hold the Home button on the front for about 3 seconds until
the #3 indicator light flashes quickly, indicating that the controller has
entered pairing mode.
3. On the Switch main page, open the controller settings and wait for the
controller to appear.
1. Enable the wired controller function in the Switch settings and insert
the Switch console into the official multifunctional dock.
2. Connect the controller to the dock with the data cable while the contro
-ller is turned off.
Connection Steps - Wireless connection
Connection Steps - Wired connection

1. In the power-off state of the controller, switch the toggle switch on the
back to the Android position.
2. Press and hold the Home button on the front for about 3 seconds until
the #4 LED indicator flashes quickly, then the controller enters pairing
mode.
3. Open the device settings and search for and connect to "MACHENIKE
G5Pro" in Bluetooth settings.
4. After pairing is successful, the #4 LED indicator will stay on for 2 seconds
and then return to power level indication.
Note:
This mode requires native support for controller operation in the game.
1. In the power-off state, connect the device and the controller directly via
the included data cable.
Connection Steps - Wired connection
Hall linear joystick and trigger calibration operation:
Connection Steps - Wireless connection
Android Mode - for Android (HarmonyOS phones, Android
phones, tablets, smart TVs, TV boxes, etc.)
The triggers support linear travel function, which requires game
matching.
Supports Home button wake-up function and rapid reconnection
function.
HALL SYSTEM CALIBRATION
COMPATIBILITY

Vibration Intensity Adjustment:
Lighting Brightness Adjustment:
FEATURES
EXPANDED FEATURES
1. Press and hold the + Home + B buttons for 3 seconds to turn on the cali
-bration in the power-off state.
2. Joystick calibration: fully move the joystick left and right slowly and rotate
it more than three times.
3. Trigger calibration: press the [LT] and [RT] buttons to the bottom more than
once.
4. Press the [Home button] to complete the calibration.
Multi-platform compatibility with PC, Switch, iOS, Android, and Harmony OS.
Convenient mode switching through gear selection without the need for com
-plex combinations or memorization.
Adjustable brightness levels for lighting settings.
Powerful exclusive MACHENIKE custom PC driver software.
Press Fn + D-pad ← to cycle through the overall brightness levels of the cont
-roller’s lighting.
Press Fn + D-pad → to change the lighting effects, cycling through constant
on/breathing/streaming/off.
Press Fn + D-pad ↑/↓ to increase or decrease the controller’s vibration
intensity.
To avoid backlight interference with yourself and others during nigh
-ttime use, it is recommended to use this function to turn off or redu
-ce the brightness of the lighting.
The light effect of the contoller will change according to the software
update, please refer to the actual light effect shown on the software

Controller Battery Level Display:
Motion Sensing Analog Function:
PROGRAMMING BUTTON MACRO DEFINITION
Four indicator lights display the controller's battery level in real-time.
During pairing and some function adjustments, they temporarily function
as function indicators and return to battery level display after approximat
-ely 2 seconds.
The controller has a built-in 600mAh battery with a battery life of 5-8 hours.
1. With the controller connected, press the Fn+M1/M2/M3 (pressing the rig
-ht trigger all the way down triggers M1/M2/M3) / M4 (pressing the left tr
-igger all the way down triggers M4). The decorative light strip will flash
continuously, indicating that the gamepad has entered recording mode.
If it does not flash, please repeat this step.
2. Record the required function buttons in order. A/B/X/Y/Up/Down/Left/
Right/L1/L2/R1/R2 and left and right joysticks are supported.
3. After the setting is completed, short press the M1 button. The light strip
backlight of the controller stops flashing and returns to the previous mo
-de, indicating that the setup is complete.
Note: To clear the current macro definition：press FN+M1 while the contr
-oller is in operation. The light strip backlight of the gamepad will flash co
-ntinuously. Then press the M1 button again, and the light strip backlight
of the gamepad will stop flashing, clearing the current custom function.
Press Fn + R3 to enable/disable the motion sensing function of the control
-ler’s right analog stick.
To program macro buttons:

TURBO Function
Customisable Profile
Supported TURBO Buttons: A/B/X/Y/Up/Down/Left/Right/L1/L2/R1/R2
Manual TURBO function: When the manual TURBO function of A button is
enabled, A button needs to be manually pressed to trigger the function.
Enable TURBO function: Press and hold FN+A and then release it. At this
time, the A button is enabled with manual continuous firing function. Pre
-ss FN+A again to enable the automatic continuous firing function of A. Pr
-ess FN+A again to turn off the continuous firing function.
Note: FN+A/B/X/Y can enable the TURBO function of A/B/X/Y. The TURBO
function of other buttons can be set in the PC driver.
The G5 PRO controller can store up to 4 personalised profiles. You can
customise your controller on the G5 PRO exclusive PC driver or the c
ontroller itself .
Press the FN+HOME Button to cycle through 4 personalised profiles,
accompanied by indicator lights and colors changes.
For more customized functions, please contact customer service
or go to the MACHENIKE official website to download the PC driver：
https://global.machenike.com/
EXPANDED FEATURES

When the controller is unresponsive or unable to identify the working
mode during operation or access, you can pull out the USB cable of th
-e controller and reconnect it, or use the manual mode to select into t
-he corresponding working mode. If the problem still can not be solve
-d, please long press the HOME button for 10 seconds or check the co
-mpatibility of the operating system and equipment with the controll
-er, if still can not be solved, please contact the dealer customer servi
-ce.
PlayStation is a registered trademark of Sony Interac
tive Entertainment (SIE).
XBOX/Windows is a registered trademark of Mirosof
Corporation.
Android is a trademark of Google nc.
Nintendo Switch is a registered trademark of Nintendo
Co.
Macos is a registered trademark of Apple Inc. in the Un
-ited States or other countries.
Other system and product names that appear in this do
-cument are generally registered trademarks or tradem
-arks of the respective developer companies. Please no
-te that the ™logo and ® logos do not appear in this doc
-ument.
Please consult customer service or the brand's website for updates
to the product firmware without notice.
RESET
Copyright Information

Direction buttons * 1 group
Function control buttons * 4
HOME button * 1
Hall LinearJoystick *2
Function buttons * 4
Multi-function button * 1
Programming buttons * 4
Back button * 1
Menu button * 1
Up, down, left, right and four corners,
eight-direction cross key.
Xbox layout ABXY buttons.
Turn on the controller or execute instructions
from the console; press and hold the HOME b
-utton for more than 5 seconds to turn off the
controller.
Elite joystick, 360-degree no dead zone precise
operation.
L1, R1, L2, R2. Linear trigger, multiple game mat
-ching.
Supports screenshot and light strip setting und
-er different modes and other function settings.
M1, M2 back buttons, M3, M4 trigger buttons cu
-stom programming, can customize the require
-d keys.
Return to the previous menu.
Open the menu interface.
600
On light effect <100mA--off light effect <55mA
ITEM DATA
Operating Current
Sleep Current
Vibration Current
Input Power
Battery Capacity
Charging Time
Use Distance Range
80-150mA
Approx.2-4 hours
＜30uA
SPECIFICATIONS
CONTROL SECTION

The controller will enter sleep mode after about 5 minutes of inactivity,
and the controller light goes out.
TERMINAL SECTION
Gear switch * 1
DCIN wired device connection
USB cable length
USB-A to Type-C
About 0.8 meters
Switch the controller mode to adapt to differe
-nt devices.