Mackie D.2 User manual

21
Owner’s Manual
Owner’s Manual
Specifications
Frequency Response :
Mic Input to any Output: (Trim at 0 dB):+0, –1 dB
20Hz to 20 kHz
Line/CD Input to any Output: ±0.5 dB
20Hz to 20 kHz
Phono input to any Output: ±1 dB of RIAA EQ curve
Distortion (THD and IMD):
THD @ Main Output, 20 Hz to 20 kHz
Mic Input @ 30 dB Gain: Less than 0.0075%
Line/CD Input @ 0 dB Gain: Less than 0.0075%
Phono Input: Less than 0.01%
THD @ Phones Output, 20 Hz to 20 kHz
Line Input @ 0 dB Gain: Less than 0.03%
SMPTE IMD @ +4 dBu Output:
Mic Input @ 30 dB Gain: Less than 0.008%
Line/CD Input @ 0 dB Gain: Less than 0.008%
Common Mode Rejection Ratio (CMRR):
Mic Input (Gain = maximum) Greater than 60 dB
@ 1 kHz
Crosstalk:
Adjacent Inputs or Input to Main Output:
Less than –85 dB
@ 1 kHz
Noise Characteristics:
Equivalent Input Noise (E.I.N.) (20 Hz to 20 kHz):
Mic Input (150 Ωsource impedance): Less than –123 dBu
Phono Input (500 Ω/500 mH source impedance):
Less than 0.3 µV
CD/Line Input (150 Ωsource impedance):
Less than –110 dBu
Dynamic Range (Main Out): Greater than 100 dB
Maximum Input Levels (rated at 1% THD):
Mic Input (Gain @ minimum): +9 dBu
CD and Line Inputs (PGM Gain = 0 dB):
+22 dBu
FX Input: +22 dBu
Phono Input: 78 mV @ 1kHz
Input/Output Characteristics:
Input Gain Control Range:
Mic Input: +13 dB to +63 dB
PGM Input: OFF to +13 dB
FX Return: OFF to +13 dB
Appendix C: Technical Info
Input Impedance:
Mic Input: 2.4 kΩbalanced
CD/ Line Input: 20 kΩbalanced
FX Return: 20 kΩbalanced
Phono Input: 47.5 kΩshunted with 200 pF
Maximum Output Levels:
XLR Main Output: +22 dBu
RCA Main Output: +22 dBu
Booth Output: +22 dBu
FX Send: +22 dBu
Phones: 15 volts rms into 8Ω(28 watts)
Output Impedance:
Main XLR/RCA Output: 150 Ω
Booth Output: 150 Ω
FX Send: 150 Ω
Phones: 25 Ω
Equalization
Mic Channel
Low: ±15 dB @ 80 Hz
Mid: ±15 dB @ 2.5 kHz
High: ±15 dB @ 12 kHz
PGM Channel
Low: +10/–inf dB @ 300 Hz
Mid: +10/–inf dB @ 1 kHz
High: +10/–inf dB @ 4 kHz
VU Meters
12-segment pre-fader PGM meters
12-segment pre-fader Main Mix meters
OL (+20), +10, +7, +4, +2, 0, –2, –4, –7, –10, –20, –30
0 LED = +4 dBu
Mic Input Signal Present LED (Sensitivity): –20 dBu
continued

22
d.2 DJ Mixer
d.2 2-channel DJ Mixer
AC Power Requirements:
Power Consumption: 20 watts
Universal AC Power Supply: 100 VAC – 240 VAC,
50-60 Hz
Physical Dimensions and Weight:
Height: 15.49”/393.4 mm (including knobs and connectors)
Width: 10"/254 mm
Depth: 4.62”/ 117.3 mm (including knobs and connectors)
Weight: 11 lb/5 kg (with FireWire card)
The d.2 mounting slots are compatible with the Odyssey Battle
Bridge. This consists of two L brackets which bolt to the d.2
and allow you to fit it securely between two turntable cases.
See www.odysseygear.com for more details.
Options
d.2 FireWire Interface Card
LOUD Technologies Inc. is always striving to improve our prod-
ucts by incorporating new and improved materials, components,
and manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
“Mackie,” and the “Running Man” are registered trademarks of
LOUD Technologies Inc. All other brand names mentioned are
trademarks or registered trademarks of their respective hold-
ers, and are hereby acknowledged.
©2005 LOUD Technologies Inc. All Rights Reserved.
WEIGHT
11 lb
5 kg
10.00"
254 mm
14.79"
375.7 mm
15.49"
393.4 mm
3.59"
91.2 mm
4.62"
117.3 mm
9.06"
230.1 mm
0.28"
7.1 mm
7.1"
180.3 mm
4.42"
112.3 mm