Macma 40590 User manual

Smart Band
Art. 40590
User Guide

Introduction of DayDayBand
| Component Description
| How to wear
Best to wear the band after unlar styloid and to adjust via Adjustment Hole.
Adjustment Hole Button
Host
(0.49 inch OLED)
Ulnar Styloid
Left Hand
Strap
Buckle

Band Charging
Please make sure the battery level is normal at rst use. Low battery will cause shut-
down and you need to charge the band for automatic power-on.
| How to Charge
Please pull the host out from wristband.
One side of charging line inserted into the host corresponding interface and the other
side is connected to the corresponding USB interface can be charged.
How to Use
| On/Off
1. In the shutdown state, long touch the function key over 3s to start up the device with
vibration.
2. In the state of power-on, long touch the function key over 3s to enter into
shutdown interface and long touch again to shut down the device after choosing OFF.
| Operation
1. Shortly touch the function key can light up the screen or switch display page under
the state of power-on.
2. No operation in 5s will turn off screen by default. Useres are supported to modify the
Charging
Startup interface Shutdown interface
Full

time by connecting phone’s APK.
Install DayDayBand APP on Phone
Scan the following QR code or enter the application market to install ‘‘DayDayBand‘‘
System requirements:
Android 4.4 and above, iOS 8 and above, phone supports for Bluetooth 4.0.
Some functions are not compatible fore rare type of phone
How to Connect
 ConnecttheAPPatrstusetocalibratetheband,automaticsynctime,
 otherwisestepsandsleepdatawillbeincorrect.
Open App
Click Settings Icon
 ↓
My Device(iOS)
Search Device(Android)
 ↓
Pull down to Scan Device
 ↓
Click to Connect
1. After pair nished, APP will remember bluetooths adress automatically. Once
opened or running in background, APP will search and connect band automatically.
2. Manually syncs data by pull-down under Exercise, Sleep interfaces.
3. Seven days ofine-data is saved. The more the data ist he longer it takes to sync
Android IOS

maximum nearly 2 minutes. ‘‘sync nished‘‘ will be shown after syncing done.
Main APP Features and Settings
| Personal Information and Exercise Goal
Please set personal information rst
after entering APP,
Settings -> Personal Settings,
Editing your portrait, gender, age,
Height and weight included to
increase data accuracy.
Plan daily exercise goal and a
feasible plan links to a sound body.
|Notications
 Thisfeaturewillbeworkableunder:
 1.Noticationsenableinsettings;
 2.ThebandandphoneAPPkeepconnectingsuccessfully.
 Thebandwillvibratereminderoncegotmessages.
Incomming Call:
Vibrate and name or number displayed (Display name only if it’s in your contacts,
display numbers otherwise)
Message:
Vibrate reminder with name from Contacts or number if unknown.
QQ:
Incoming Call Message QQ WeChat Clock Sedentary
Age 27 ›
Gender Male ›
NAME
Profile◄
◄
Height 180 cm ›
Weight 75 kg ›
Set goal steps 10.000 ›
Distance Unit 2 km ›

Vibrating and QQ icon reminder.
WeChat:
Vibrating and WeChat icon reminder
Alarm Clock:
Up to 3 alarms with user-friendly vibration. Support ofine Clock alarming.
Sedentary:
One hour default interval. Notied with vibration after sitting for one hour.
Warn tips for Android users:
 AllowDayDayBandrunninginbackstagewhenusesNoticationsandaddittotrust
one in you privilege management.
| Other Features
MoreAPPNotications
Add more APP notications in Settings, which support partial model only.
Against Lost
The band will vibrate when the phone out of range the band.
 ForAndroidusers,mustallowDayDayBand’soatingwindowdisplaywhenuse
the function.
Find Band
Click ‘‘Find band‘‘, band will vibrate when connected with phone.
Shake and Photograph
On Shake and Photograph interface, user can shake the hand which wear the band to
take a picture after 3 seconds prompt.
Firmware Upgrade
Detecting new version; Upgrade must be Bluetoothed-connected;
Upgrade takes 2-3 minutes and avoid disconnecting with Bluetooth.
Factory date Reset

Zero out all data from band and APP, then APP rebooted.
Symbol Description
| Clock Interface
Bluetooth Icon Lights always, indicating connected with phone succesfully.
Icon disappears otherwise. Time calibrated automatically after syncing to phone.
| Steps Interface
Wear band to record steps every day.
Check out real-time steps constantly.
| Distance Interface
Show total distance via calculating steps,
The band will calculate the total distance
According to steps and height of APP’s
Personal settings.
| Calories Interface
Record burned calories within exercise,
The band will calculate the total calories
burned according to steps
and weight of APP’s personal settings.
| Sleep Mode
When sleep, Band will automatically monitor
how long and how well you sleep;
check data only on APP terminal.
Warm tips: please wear the band
Bluetooth
Connectivity
Icon
Icon
Icon
Unit
Unit
Unit
Steps
Distance
Calories
burned
Date
Time
Battery

when sleep so as to record your sleep data
FAQ
Whynonotcationafterenablingit?
Android users: Make sure band connect with phone. Then, open privilege and allow it
to access Incoming Call, Message and Contacts at Settings in running backstage. If
any security APP installed, add DayDayBand to trust. iOS users: No notication even
connected, please reboot the phone and connect again. Then click Pair after Bluetooth
Pairing Request.
WhysomebandswilldisplayAM/PMbutsomenot?
It’s determined by time format of users‘ phone.
AM/PM will display if users‘ phone use 12-hour format.
AM/PM will not display if users‘ phone use 24-hour format.
WhydoesitunworkablewhenIuseShakeandPhotograph?
When entering Shake and Photograph, please allow APP to access your camera.
Basic Parameters
Band type: Smart band Battery type: Lithium polymer
Host weight: 23g Sync way: Bluetooth 4.0
Battery capacity: 60mAh Waterproof grade: IP66
Working temperature: -10°C – 50°C Show mode: 0.49 inch OLED
Band lenght: 240 mm Wrist Strap material: The silicone
Wrist clasp material: Aluminium alloy
Safety Notice
1. Don’t wear the band when shower or swimming.
2. Please connect band when sync data.
3. Use the built-in charging line for charging.
4. Don’t exposure the band in higher moisture or extremley low temperature.
5. When band crashes, check phone’s memory sufcient and service close or not
and then restart your phone and try again.
Components Introduction
*Host, *The silicone, *Charging line, *Packaging and instructions

Dispose of the article according to the regulations in force in your country. The item
must not be disposed of with normal household waste, but must be returned for
recycling at a collection point for electronic waste or a recycling center.
Batteries must be returned to a collection point in the city, town or trade.
TheDeclarationofConformityforthisproductcanbefoundat:
http://data.promotray.de/Konformitaetserklaerungen/40590.pdf
Macma, Thomas-Mann-Str. 60, DE 90471 Nürnberg

Smart Band
Art. 40590
Bedienungsanleitung