Mad Bean Pedals Tapthat User manual

Tapthat
FX TYPE: Other
Taptation Utility
© 2016 madbeanpedals
1.88” W x 1.18” H
Etcher’s Paradise projects are intended for DIY use only! Commercial pedal manufacturing using
these materials is strictly forbidden.

2
V
alue QTY Type Rating
R1 1k 1k 4 Metal Film 1/4W
R2 1k 100k 2 Metal Film 1/4W
R3 1k 100n 2 Film 16v min.
R4 100k 10uF 1 Electrolytic 16v min.
R5 1k 1n5817 1
R6 100k LED 2 * your choice
BS170 1
C1 10uF LM78L05 1
C2 100n SPST 2 or, SPDT On/On
C3 100n SPDT 1 On/Off/On
MOM. 1 Momentary
D1 1n5817 PIC 1
TEMP LED TAPTATION 1
SCALE LED 100kB 1 Solder Lug 9mm or 16mm
25k
A
1 Solder Lug 9mm or 16mm
Q1 BS170
REG1 LM78L05
DT SPST
PWM SPST
SUBD SPDT
TAP MOM.
IC1 PIC
IC2 TAPTATION
DELA
Y
100kB
MOD 25k
A
IC's
Pots
Resistors
Caps
Diodes
Transistors
B.O.M. Shopping List
Regulator
Switches

3
Tapthat is a utility PCB for the Taptation chipset available from DIYStompboxes. The Taptation allows
for tap tempo control of many PT2399-based delays. The Tapthat PCB includes options for all the
available features of the Taptation in a relatively small size. You can build it into its own enclosure for
external control or integrate into your delay project (if space allows).
Please read the Taptation page on DIYSB for more information:
http://diystompboxes.com/zencart/index.php?main_page=product_info&cPath=20&products_id=65
Notes
 To use Tapthat connect the “VCO” pad directly to pin6 of the PT2399 in your delay project.
 You do not have to use the Double Time (DT) or Pulse Wave Modifier (PWM) switches. Simply
omit the switches and leave the corresponding pads unconnected.

4