!"#$%&'()&*(+&,)'-$.&/"0&
1()23$&4+()25
One of the most iconic amplifiers: vintage 4-input Marshall, that is
based on a Fender Bassman amplifier actually, just has that classic
guitar tone. That rebellious rock tone we all have grown to love
from recordings of the bands and artists like AC/DC, Cream, Jimi
Hendrix, Led Zeppelin, Free, Yngwie Malmsteen etc.
Mad Professor Loud´n Proud is a vintage 4-input Marshall in a
box. It is a compact pedal with a complete amp signal path repli-
cated inside. Not only the preamp but also the power amp contain-
ing phase inverter, push-pull stage and also the output transformer
simulation. This internal structure makes the pedal not only sound but
also behave like a real amp.
And like a vintage Marshall amp, the pedal has a moderate amount
of gain. This is what led us into adding a boost/fuzz to this medium
gain overdrive circuit. The pre boost has capability of pushing
13dB. This will add a nice amount of gain to the pedal. It also thick-
ens the midrange a bit so feel free to experiment with the boost
also for a different voicing for the overall tone of the pedal.The fuzz
is designed to work like a vintage germanium fuzz. By engaging
the fuzz you can find a great variety of tones from a clean tone to a
thick and warm fuzzy tones just by rolling the guitar volume.
The vintage germanium fuzz into a plexi Marshall is a classic tone
that we absolutely wanted to include to the Loud´n Proud pedal!
You will also find a switch for two different character voicings in the
Loud´n Proud pedal: tighter bass and a bit compressed tone on the
left and a looser bass with the maximum dynamics on the right.
If you are familiar and love the vintage Marshall amp tone, that is a
very recognizable tone from many classic recordings, you will also
love this pedal as it is a real deal for those who dare!
CONTROLS:
Adjusts the amount of the low frequencies.
Adjusts the amount of the mid frequencies.
Adjusts the high frequency amplification in the preamp
section.
Adjusts the amount of distortion.
Sets the output level.
Adjusts the high frequency amplification in the
power amp section by changing high frequency feedback.
Sets the output level of the fuzz.
Adjusts the amount of the boost or the fuzz.
Tighter bass and a bit compressed
sound on the left and a looser bass with maximum dynamics on
the right.
Chooses between the fuzz or the
boost circuits.
Never operate the unit with its bottom removed or damage will
most likely occur.
for Fuzz
plug, center negative and positive sleeve
Loud´n Proud is protected against wrong eliminator polarity.
Use recommended voltage for best results.
The manufacturer claims that the above mentioned product
678&49:;<==:9&>&1:?83@&49:?8&>&:A@<93=&67@?71
